Spatial Reasoning 11+ Non-Verbal Reasoning Worksheets, Questions and Revision
7 original Spatial Reasoning worksheet packs - 326 printable pages with full mark schemes. Rotation, reflection, cube nets, block counting, plans and fold-punch types. View any pack in the browser or open the print-ready PDF.
- packs
- 7
- question pages
- 219
- printable pages
- 326
- 4.5Rotation
- 4.7Cube Nets
- 4.10Fold and Punch
Free for personal and classroom use - see copyright & terms.
An arrow starts pointing East. It is rotated 270 degrees clockwise about its centre. Which direction does it now point?
- A 270-degree clockwise rotation is the same as three 90-degree clockwise steps.
- Step 1: East becomes South.
- Step 2: South becomes West.
- Step 3: West becomes North.
- Final answer: After a 270-degree clockwise rotation, the arrow points North.
Working through spatial reasoning
Spatial reasoning on this shelf asks you to keep track of how parts fit together, how a solid is viewed, and how a change in position affects what you see. The listed families are cube nets, 3D block counting, plans and elevations, fold and punch, and combined and hidden shapes. Each uses a different representation, so first identify what the question gives you and what it asks you to produce.
A reliable method is to record the given information in a compact form before deciding. For a net, name the faces and trace joins; for blocks, list every stack height; for views, write one result per row or column; for a folded sheet, mark each crease and hole position. Then check the answer against the original description. That check catches missed squares, reversed directions and features that cannot appear in the stated view. Keep the working beside the prompt so each recorded detail can be checked against its source.
Cube nets and opposite faces
A cube net is a flat arrangement of six squares that folds into the cube's faces. Mark each square with its given letter, then follow straight joined edges to see which faces meet. A useful orientation check is that two squares with one square between them on a straight line become opposite when folded. Opposite faces cannot both be visible on one corner of the finished cube.
Keep the letters attached to their squares while imagining the fold. Do not turn a letter or swap labels to make an option fit. Check the proposed visible faces against both the joins in the net and the faces that must be hidden on the back.
Worked example. A net is a vertical column of four squares, top to bottom: P, Q, R, S, with square T attached to the left edge of Q and square U attached to the right edge of Q. Which square is opposite P?
- Trace the straight column from P through Q to R. There is exactly one square, Q, between P and R.
- A pair with one intervening square along a straight line folds to opposite faces.
- Check that this uses the stated column and does not rely on a diagonal jump to T or U.
Answer: R is opposite P.
Count cubes from recorded stack heights
In block counting, record the height at every occupied grid position, including a stack of height one. Add heights for a total. If asked which cubes touch the table, count occupied positions instead, because only the bottom cube of each stack rests on it. Hidden-cube questions require a separate check of the neighbouring stacks and any cube above.
For a missing-cubes question, calculate the capacity of the surrounding box first, then subtract the cubes already present. Keeping these quantities in separate lines makes it easier to spot whether you have counted all positions and used the right operation.
Worked example. A solid stands on a 2 by 2 grid with stack heights A1 = 2, B1 = 2, A2 = 1, B2 = 3. How many unit cubes make up the solid altogether?
- Record the four heights in grid order: A1 = 2, B1 = 2, A2 = 1, B2 = 3.
- Add each stack once: 2 + 2 + 1 + 3 = 8.
- Check that all four positions, including the stack of height one, appear in the sum.
Answer: 8 unit cubes (2 + 2 + 1 + 3 = 8).
Orient plans and elevations
A plan is the view from directly above, while an elevation is viewed straight on from a named side. Fix the direction before reading the grid: note which row is nearest the viewer and which way columns run. In a plan, show occupied squares and ignore their heights. In a front elevation, use the tallest stack in each column; in a side elevation, use the tallest stack in each row.
Write the results in the same left-to-right or front-to-back order named by the prompt. This makes the orientation visible in your working and prevents a correct set of heights from being placed in reverse order.
Worked example. A solid stands on a grid with 2 columns (A, B) and 2 rows (1 nearest the viewer, 2 furthest). The stack heights are: A1 = 2, B1 = 1, A2 = 3, B2 = 1. What is the front elevation, reading the bars left to right?
- For column A, compare A1 = 2 with A2 = 3; the tallest stack is 3.
- For column B, compare B1 = 1 with B2 = 1; the tallest stack is 1.
- Keep the named column order A then B when writing the bars.
Answer: The front elevation bars are 3 and 1, from left to right.
Record folds and reverse them
Fold-and-punch questions describe a sheet, the fold direction, and where a hole passes through the layers. Record the fold lines in order and note the hole's distances from the crease and from a fixed edge. When opening the paper, undo the last fold first. Reflect each hole across that crease, keeping its distance from the crease and its position along the crease consistent.
Count the layers at the punch as a check on the number of holes after unfolding. With more than one fold, repeat the reflection for each crease in reverse order, carrying all holes forward.
Worked example. A square sheet measures 8cm by 8cm. It is folded in half horizontally, bottom half folded up onto the top half. A hole is punched 1cm from the crease and 2cm from the left edge, on the folded top half. Where do the two holes appear, measured from the left edge and the bottom edge?
- The horizontal crease is 4cm from the bottom edge. One hole passes through two layers, so opening the sheet gives two holes.
- The original folded position is 1cm from the crease, on the upper side, so its height from the bottom is 5cm. Its mirror is 1cm below the crease, at 3cm.
- Both positions stay 2cm from the left edge because the fold is horizontal.
Answer: The holes are at (2cm from the left, 3cm from the bottom) and (2cm from the left, 5cm from the bottom).
Join shapes and check a proposed answer
When combining shapes, compare the marked edge lengths, place those edges exactly together, and remove the shared edge from the outside outline. Look for adjoining straight edges that merge into one line. In a hidden-shape task, trace only the lines already present and compare each candidate's lengths and angles with that route.
To check an answer, return to the wording and verify each condition in turn: the right pieces were joined, the requested view or relationship was used, and no extra line or face was assumed. State the result only after that check. This turns a visual guess into a short record that can be reviewed.
Worked example. Shape 1 is a rectangle 5cm wide and 3cm tall. Shape 2 is a right-angled triangle with a base of 5cm and a height of 2cm, right angle at the bottom-left corner. The triangle's 5cm base (the marked edge) is joined exactly along the top edge of the rectangle, with the triangle pointing up. What shape is formed, and what is its total height?
- The marked edges are both 5cm, so they fit exactly. The rectangle's top edge becomes internal to the joined shape.
- The triangle's vertical leg is 2cm and extends from the rectangle's top, 3cm above its base. The combined left side is therefore 3 + 2 = 5cm high, while the right side is 3cm.
- The outside boundary has four sides: a 5cm base, a 3cm right side, a sloping top edge and a 5cm left side.
Answer: A right-angled trapezium is formed, with left and right sides 5cm and 3cm high; its total height is 5cm.