Year 10 Paper 5: Mixed Topics
Covers the CPU and the fetch-execute cycle, memory and storage, binary and hexadecimal number systems, logic gates and boolean logic, operating systems and utility software, networks, topologies and protocols, and algorithm design and trace tables.
Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [2 marks]
Memory and Storage
A student is asked to name examples of secondary storage.
State two examples of secondary storage devices.
Question 2 [2 marks]
Boolean Logic and Logic Gates
An XOR gate has two inputs, A and B, and outputs 1 only when exactly one of its inputs is 1.
State the output of the XOR gate for A=1,B=1, and for A=1,B=0.
Question 3 [3 marks]
Number Systems: Binary and Hexadecimal
Convert the 8-bit binary number 00101101 into denary.
Question 4 [4 marks]
Networks, Topologies and Protocols
A small office network uses a switch, a router, a network interface card (NIC) and a wireless access point (WAP).
State the function of each of these four pieces of network hardware.
Question 5 [4 marks]
Algorithm Design and Trace Tables
The following pseudocode is run:
total = 0
for i = 1 to 5
if i mod 2 == 0 then
total = total + i
endif
next i
print total
State what is output by this pseudocode, explaining which values of i are added to total.
Question 6 [4 marks]
CPU and the Fetch-Execute Cycle
A teacher lists four special-purpose registers used during the fetch-execute cycle: the Program Counter (PC), the Memory Address Register (MAR), the Memory Data Register (MDR) and the Current Instruction Register (CIR).
State the purpose of each of these four registers.
Question 7 [2 marks]
Number Systems: Binary and Hexadecimal
Subtract the 8-bit binary number 00011010 from the 8-bit binary number 01000101, giving your answer as an 8-bit binary number.
Question 8 [2 marks]
CPU and the Fetch-Execute Cycle
A quad-core CPU has four cores, each with the same clock speed as an otherwise identical single-core CPU.
Explain why running an application that has been written to use only one core may not be much faster on the quad-core CPU than on the single-core CPU.
Question 9 [3 marks]
Memory and Storage
A film production company archives finished projects that are unlikely to be needed again for many years, using magnetic tape rather than SSDs.
Explain why magnetic tape is often used for this kind of long-term archival storage.
Question 10 [4 marks]
Boolean Logic and Logic Gates
A NAND gate has two inputs, C and D, and its output is the opposite of what an AND gate would give for the same inputs.
Write a Boolean expression for the NAND gate's output using C and D, and state its output when C=1 and D=1.
Question 11 [4 marks]
Algorithm Design and Trace Tables
The following pseudocode is intended to output the largest of three numbers, a, b and c, but contains a logic error.
largest = a
if b > largest then
largest = a
endif
if c > largest then
largest = c
endif
print largest
Identify the line containing the error, explain why it is wrong, and state the correction needed.
Example initial values: a = 2, b = 9, c = 4.
Question 12 [5 marks]
Operating Systems and Utility Software
An operating system must allow several programs to run at once on a computer with only one CPU core.
Explain how the operating system's process management makes this possible, referring to how CPU time is shared between processes.
Question 13 [4 marks]
Boolean Logic and Logic Gates
A security system unlocks a door only when a valid keycard is used (K) and the correct PIN is entered (P), or when a manager override is used (M).
Write a Boolean expression for unlock using K, P and M, and state whether the door unlocks when K=1, P=0 and M=1.
Question 14 [4 marks]
Number Systems: Binary and Hexadecimal
A single parity bit is added to each 7-bit binary code sent between two computers, set so that the total number of 1 bits, including the parity bit, is always even.
The 7-bit code 1011001 is sent. State the value the parity bit should be set to, and explain how the receiving computer could use the parity bit to detect a single-bit transmission error.
Question 15 [4 marks]
Boolean Logic and Logic Gates
A fire alarm sounds when a smoke sensor detects smoke (S) and the alarm is switched on (P), or when a manual call point is pressed (M), regardless of the other inputs.
Write a Boolean expression for alarm using S, P and M, and state whether the alarm sounds when S=0, P=1 and M=1.
Question 16 [3 marks]
Networks, Topologies and Protocols
A remote worker connects to their company's internal network from home using a Virtual Private Network (VPN) over the public internet.
Discuss why the company requires staff to use a VPN rather than connecting directly over the public internet, referring to encryption and access to internal resources.
Question 17 [3 marks]
CPU and the Fetch-Execute Cycle
A company is choosing hardware for a task that repeats the same simple calculation across millions of pieces of data at once. It is deciding between a CPU with 8 powerful cores and a graphics card (GPU) with thousands of simpler cores.
Discuss which processor is likely to be better suited to this task, referring to the number of cores and the nature of the task.
Question 18 [4 marks]
Operating Systems and Utility Software
A company is choosing between an operating system with a highly customisable command line interface aimed at experienced technical staff, and one with a simple graphical user interface aimed at general office staff.
Discuss which operating system would be more suitable for the company's general office staff, and which would be more suitable for its IT support team, justifying your answer.
Question 19 [4 marks]
Boolean Logic and Logic Gates
A half adder circuit has two inputs, A and B, and two outputs, Sum and Carry. Sum is produced by an XOR gate, and Carry is produced by an AND gate.
Complete a truth table for the half adder for all four combinations of A and B, giving Sum and Carry for each.
Question 20 [5 marks]
Memory and Storage
A user's laptop runs slowly when many browser tabs and a photo-editing program are open at once. A technician suggests upgrading either the RAM or the SSD.
Discuss which upgrade, more RAM or a larger/faster SSD, is more likely to solve this specific problem, and explain your reasoning by referring to virtual memory.
Question 21 [4 marks]
CPU and the Fetch-Execute Cycle
A server in a data centre runs continuously and must process many separate requests from different users at the same time, unlike a home desktop computer used by one person for one task at a time.
Discuss how the CPU requirements of this server are likely to differ from those of a typical home desktop computer, referring to the number of cores and reliability.
Question 22 [6 marks]
Memory and Storage
A hospital is deciding how to store MRI scan images. Each scan is very large, scans must be retrievable within seconds for a doctor treating a patient, and scans must legally be kept for at least 10 years even if never viewed again after the first year.
Discuss how the hospital could use a combination of different storage types to meet these requirements, referring to speed, capacity and cost.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| one correct example, for example a hard disk drive (HDD), a solid-state drive (SSD), a USB flash drive, an optical disc (DVD/Blu-ray), or magnetic tape | B1 |
| a second different correct example from the list above | B1 |
| Final answer: Any two of: HDD, SSD, USB flash drive, optical disc (DVD/Blu-ray), magnetic tape | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| A=1, B=1 gives output 0 (both inputs are the same) | B1 |
| A=1, B=0 gives output 1 (the inputs are different) | B1 |
| Final answer: A=1,B=1: 0. A=1,B=0: 1 | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| identifying the place values of each 1 bit: 32, 8, 4 and 1 | M1 |
| correctly adding these place values together | M1 |
| 45 | A1 |
| Question 4[4 marks] | |
|---|---|
| Answer or working | Marks |
| a switch forwards LAN frames using destination MAC addresses and its forwarding table; unknown/broadcast frames may be flooded | B1 |
| a router forwards packets between different networks using network addresses/routes | B1 |
| a NIC provides the device network interface for sending/receiving frames, wired or wireless | B1 |
| a WAP allows wireless devices to join the local network | B1 |
| Final answer: Switch: forwards LAN frames using MAC information. Router: forwards packets between networks. NIC: device interface for sending/receiving network data. WAP: wireless access to the LAN. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| the loop runs with i taking the values 1, 2, 3, 4 and 5 in turn | B1 |
| the if statement only adds i to total when i mod 2 equals 0, meaning i is even | B1 |
| so only i = 2 and i = 4 are added to total, giving 2 + 4 = 6 | B1 |
| the output is 6 | A1 |
| Final answer: 6 (only the even values, 2 and 4, are added) | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| PC holds the address of the next instruction to be fetched | B1 |
| MAR holds the address of the memory location currently being accessed | B1 |
| MDR holds the data or instruction that is being transferred to or from memory | B1 |
| CIR holds the instruction currently being decoded and executed | B1 |
| Final answer: PC: address of next instruction. MAR: address being accessed. MDR: data/instruction being transferred. CIR: instruction being decoded/executed | |
| Question 7[2 marks] | |
|---|---|
| Answer or working | Marks |
| Valid subtraction method: binary borrowing, adding the two's complement, or 69-26=43 followed by conversion. | M1 |
| 00101011; accept a correct answer without working for both marks. | A1 |
| Final answer: 00101011 | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| the application cannot split its sequential work across the extra cores, so only one core executes its instructions at a time | B1 |
| that core has the same clock speed as the single-core CPU, so application execution is similar; other cores can help background tasks but do not give a fourfold application speedup | B1 |
| Final answer: Only one core executes this application at a time. With the same per-core speed, the other three cores cannot substantially accelerate its sequential work, although they can run background tasks. | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| tape provides high bulk capacity at relatively low media cost per GB | B1 |
| sequential access makes retrieval slower, acceptable for rarely accessed archives | B1 |
| correctly stored and maintained tape can support long retention, with integrity checks and migration as needed | B1 |
| Final answer: Tape has high capacity and low cost per GB for bulk archives, and can be removed for offline storage with little standby power. Sequential access makes retrieval slow, acceptable for rarely needed material; long retention needs suitable conditions, checks and migration rather than guaranteed permanence. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| Combines C and D with AND, or uses an equivalent De Morgan form. | M1 |
| Negates the whole conjunction: NOT (C AND D), accepting NOT C OR NOT D. | M1 |
| Evaluates C AND D as 1 for C=D=1, or correctly substitutes into an equivalent expression. | M1 |
| Gives output 0; full evaluation credit for the correct stated output. | A1 |
| Final answer: output = NOT (C AND D); with C=1, D=1 the output is 0 | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| Locate largest = a inside the first if | B1 |
| The condition establishes b exceeds the current largest | B1 |
| Assigning a fails to update largest to b | B1 |
| Replace that line with largest = b | B1 |
| Final answer: The assignment largest = a inside the first if is wrong. When b exceeds the current largest, it must store b, not a. Replace that assignment with largest = b. For a=2,b=9,c=4, the original prints 4 whereas the correction prints 9. Corrected pseudocode: largest = a if b > largest then largest = b endif if c > largest then largest = c endif print largest | |
| Question 12[5 marks] | |
|---|---|
| Answer or working | Marks |
| one CPU core executes only one process instruction at an instant | B1 |
| scheduler rapidly assigns short CPU time slices to different ready processes | B1 |
| rapid interleaving gives users the appearance of simultaneous application execution | B1 |
| context switching saves/restores process execution state so each process continues correctly | B1 |
| a process waiting for input/I/O can yield CPU time to another ready process | B1 |
| Final answer: The scheduler divides CPU time into short slices among ready processes, using timer interrupts and context switches. It saves/restores execution state as it switches rapidly, giving the appearance of concurrency on one core; only one process executes instructions at a particular instant. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| combining K and P with AND, for example (K AND P) | M1 |
| combining this with M using OR, for example unlock = (K AND P) OR M | M1 |
| evaluating (K AND P) = (1 AND 0) = 0 when K=1 and P=0 | M1 |
| evaluating 0 OR 1 = 1, so the door unlocks | A1 |
| Final answer: unlock = (K AND P) OR M; with K=1, P=0, M=1 the door unlocks (output 1) | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| Counts four 1 bits in 1011001. | M1 |
| Parity bit 0; the correct parity answer earns the counting mark. | A1 |
| Receiver counts the 1 bits in the whole received code including the parity bit. | B1 |
| A single flipped bit changes even parity to odd, so an odd total signals an error; does not locate or correct it. | B1 |
| Final answer: Parity bit = 0 (the code already has four 1 bits, an even number); the receiver recounts the 1 bits including the parity bit, and an odd total reveals a single-bit error | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| Combines S and P with AND. | M1 |
| Uses alarm = (S AND P) OR M, accepting logically equivalent forms. | M1 |
| Correct substitution: (0 AND 1) OR 1, or observes that M=1 forces the OR output. | M1 |
| Output 1, so the alarm sounds; award both evaluation marks for a correct conclusion. | A1 |
| Final answer: alarm = (S AND P) OR M; with S=0, P=1, M=1 the alarm sounds (output 1), because M=1 alone is enough | |
| Question 16[3 marks] | |
|---|---|
| Answer or working | Marks |
| a VPN establishes an encrypted tunnel between the remote device and company endpoint | B1 |
| interception over the public network then exposes encrypted rather than readable company traffic | B1 |
| authenticated/authorised VPN users can reach permitted internal resources without exposing those services directly to the public internet | B1 |
| Final answer: A VPN encrypts traffic to the company endpoint, protecting it from reading in transit, and gives authorised remote workers access to permitted internal resources. It does not replace authentication or endpoint security. | |
| Question 17[3 marks] | |
|---|---|
| Answer or working | Marks |
| independent repetitions can be divided across many GPU cores and processed simultaneously | B1 |
| the GPU can therefore offer higher throughput for this workload than eight CPU cores | B1 |
| powerful CPU cores suit complex sequential/control-heavy work better, but that strength is less relevant to these simple parallel calculations | B1 |
| Final answer: The GPU is suited to many independent identical calculations: thousands of simple cores can execute across many data elements simultaneously, giving high throughput. CPU cores are stronger for complex sequential/control-heavy tasks but eight offer less parallelism. Data transfer and non-parallel portions may limit GPU gains. | |
| Question 18[4 marks] | |
|---|---|
| Answer or working | Marks |
| GUI menus/icons make common office tasks discoverable without memorising commands | B1 |
| reduced training/syntax-error burden makes the GUI a suitable choice for general office staff | B1 |
| CLI scripts can automate repeated precise administration tasks across computers | B1 |
| technical staff can use that control efficiently, justifying CLI access for support despite the expertise required; interfaces may coexist | B1 |
| Final answer: GUI menus suit general office staff by making everyday actions discoverable with less command training. CLI scripting suits skilled IT staff automating precise repeated administration. These interfaces can coexist on one OS. | |
| Question 19[4 marks] | |
|---|---|
| Answer or working | Marks |
| A=0, B=0 gives Sum=0, Carry=0. | B1 |
| A=0, B=1 gives Sum=1, Carry=0. | B1 |
| A=1, B=0 gives Sum=1, Carry=0. | B1 |
| A=1, B=1 gives Sum=0, Carry=1. | B1 |
| Final answer: A=0,B=0: Sum 0, Carry 0. A=0,B=1: Sum 1, Carry 0. A=1,B=0: Sum 1, Carry 0. A=1,B=1: Sum 0, Carry 1 | |
| Question 20[5 marks] | |
|---|---|
| Answer or working | Marks |
| several active programs/tabs can exhaust available RAM | B1 |
| the OS may move inactive pages to secondary storage and load them again when needed | B1 |
| these secondary-storage transfers are slower than RAM access and can cause the reported slowdown | B1 |
| more RAM can retain more active data and reduce paging, so it is likely to help if memory pressure is confirmed | B1 |
| a faster SSD may reduce paging delay but extra SSD capacity alone does not speed it up or remove RAM pressure | B1 |
| Final answer: More RAM is likely to help if monitoring confirms RAM pressure and paging. A faster SSD can reduce paging delays; a larger SSD alone does not necessarily improve paging speed. Other causes of slowdown remain possible. | |
| Question 21[4 marks] | |
|---|---|
| Answer or working | Marks |
| many independent requests can run on different cores, so more cores can increase server throughput | B1 |
| a desktop with mainly sequential interactive work may benefit more from per-core speed than a large core count | B1 |
| continuous server service needs stable operation and adequate cooling under sustained load | B1 |
| failures can interrupt many users, so dependable hardware/error handling and redundancy are more valuable than in a single-user machine | B1 |
| Final answer: A server benefits from many cores for concurrent independent requests and stable continuous operation with appropriate cooling and error handling. Desktop workloads may benefit more from per-core responsiveness; reliability also depends on supporting hardware and redundancy. | |
| Question 22[6 marks] | |
|---|---|
| Answer or working | Marks |
| scans that must be retrieved in seconds require an online accessible copy throughout the ten years | B1 |
| SSD storage can provide low-latency access for recent/frequently used scans | B1 |
| large online HDD storage can provide cheaper capacity for older scans if tested to meet the retrieval deadline | B1 |
| an offline tape archive alone cannot meet seconds retrieval, although tape can provide additional backup | B1 |
| maintain integrity checks, backups/redundancy and migrations so retained scans remain recoverable over ten years | B1 |
| justified combined design weighs verified retrieval speed and total retained capacity/cost, rather than putting all scans on costly SSDs | B1 |
| Final answer: Keep all retained scans online with retrieval tested to meet the seconds requirement: SSD for hot data and adequate-capacity online HDD storage for colder data can balance speed and cost. Tape can provide backup but cannot be the only copy of older scans. Maintain integrity and recovery over ten years. | |