Year 11 Paper 3: Systems and Programming
Covers the CPU and the fetch-execute cycle, memory and storage, networks, topologies and protocols, cyber security threats and measures, operating systems and utility software, algorithm design and trace tables, programming constructs, and binary and hexadecimal number systems.
Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [1 mark]
Networks, Topologies and Protocols
A network engineer explains that every device on a network has both a MAC address and, usually, an IP address.
State one difference between a MAC address and an IP address.
Question 2 [2 marks]
Operating Systems and Utility Software
A student compares two utility software programs: encryption software and disk cleanup software.
State the purpose of each of these two utility programs.
Question 3 [2 marks]
Memory and Storage
A washing machine contains a small chip that stores its built-in wash programs.
Explain why ROM, rather than RAM, is used to store these wash programs.
Question 4 [2 marks]
Number Systems: Binary and Hexadecimal
Convert the denary number 22 into an 8-bit binary number.
Question 5 [2 marks]
Cyber Security Threats and Measures
A school is running an assembly about online safety.
State two examples of malware.
Question 6 [2 marks]
Programming Constructs
A program stores a person's height in metres as a decimal value, for example 1.75.
State the most appropriate data type for this variable, and state one other example of data that would use this data type.
Question 7 [4 marks]
Algorithm Design and Trace Tables
The following pseudocode is run:
total = 0
for i = 1 to 5
if i mod 2 == 0 then
total = total + i
endif
next i
print total
State what is output by this pseudocode, explaining which values of i are added to total.
Question 8 [4 marks]
CPU and the Fetch-Execute Cycle
A teacher lists four special-purpose registers used during the fetch-execute cycle: the Program Counter (PC), the Memory Address Register (MAR), the Memory Data Register (MDR) and the Current Instruction Register (CIR).
State the purpose of each of these four registers.
Question 9 [2 marks]
Number Systems: Binary and Hexadecimal
Subtract the 8-bit binary number 00011010 from the 8-bit binary number 01000101, giving your answer as an 8-bit binary number.
Question 10 [3 marks]
Cyber Security Threats and Measures
A hospital's computer files are suddenly encrypted by an attacker, who demands payment before providing the key to unlock them.
Identify the type of attack described, and explain why this kind of attack is especially serious for an organisation such as a hospital.
Question 11 [4 marks]
Networks, Topologies and Protocols
A user sends an email using an email client such as Outlook.
Identify one protocol used to send an email and one protocol used to retrieve email from a mail server, and briefly state what each does.
Question 12 [4 marks]
Memory and Storage
A photographer needs a portable storage device to carry photos between locations with no reliable power supply, and the device will often be dropped or knocked while travelling.
Explain why a portable SSD would be more suitable than a portable HDD for this use, referring to durability and power use.
Question 13 [4 marks]
Programming Constructs
Priya is writing a program that asks the user to enter their age, adds 1 to it, and prints the result. The program crashes as soon as a user enters their age.
Explain a likely cause of this error, referring to data types, and state how the code should be corrected.
Question 14 [4 marks]
Memory and Storage
A company's file server automatically moves files that have not been opened in over a year from its SSD to a much larger, cheaper HDD, keeping only recently used files on the SSD.
Explain the advantage of this approach compared with storing all files on the SSD alone.
Question 15 [4 marks]
Cyber Security Threats and Measures
A user connects to public Wi-Fi in a cafe. An attacker on the same network intercepts and reads the data travelling between the user's laptop and the websites they visit, without either side noticing.
Identify the type of attack described, and explain one way the user could protect themselves against it on public Wi-Fi.
Question 16 [4 marks]
Operating Systems and Utility Software
A user permanently deletes a large file from a magnetic HDD, bypassing any recycle bin. Deletion takes only a moment, although overwriting all the file contents would take much longer. Assume ordinary logical deletion rather than secure erasure.
Explain why deletion is quick, how the operating system manages the freed storage space and whether the old data could still be recovered.
Question 17 [5 marks]
Memory and Storage
A school laptop has 8 GB of RAM. Three applications use 1536 MB, 512 MB and 4096 MB. Use 1 GB = 1024 MB. For this calculation, ignore RAM used by the operating system and all other processes.
Calculate how much RAM remains free in MB, and state whether a fourth application needing 2048 MB could fit without virtual memory.
Question 18 [5 marks]
Algorithm Design and Trace Tables
Design an algorithm, in pseudocode, that asks the user to enter 10 numbers and then outputs the average of the numbers entered.
Use inclusive for-loop bounds and real division. Example inputs: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10.
Question 19 [4 marks]
CPU and the Fetch-Execute Cycle
A student claims: 'A computer should always use the CPU with the highest possible clock speed, because clock speed is the only factor that affects performance.'
Discuss whether this claim is accurate, referring to cache size and the number of cores in your answer.
Question 20 [5 marks]
Memory and Storage
A photography studio in Leeds needs to back up 500 GB of client photographs every week. The backups must be kept off-site for two years and need to survive being transported by hand.
Evaluate whether the studio should use solid-state storage or optical storage for these backups, referring to capacity, durability and cost in your answer.
Question 21 [5 marks]
CPU and the Fetch-Execute Cycle
A manufacturer is designing a new smartphone CPU and must balance performance against battery life, since a phone cannot stay plugged into the mains like a desktop computer.
Discuss the trade-offs the manufacturer faces when choosing the clock speed, cache size and number of cores for this CPU.
Question 22 [5 marks]
Operating Systems and Utility Software
A design agency in Bristol is deciding whether to upgrade a computer from 4 GB of RAM running an older operating system, to 16 GB of RAM running a modern operating system.
Evaluate the impact this upgrade would have on the computer's performance, referring to multitasking and virtual memory in your answer.
Question 23 [3 marks]
CPU and the Fetch-Execute Cycle
A company is choosing hardware for a task that repeats the same simple calculation across millions of pieces of data at once. It is deciding between a CPU with 8 powerful cores and a graphics card (GPU) with thousands of simpler cores.
Discuss which processor is likely to be better suited to this task, referring to the number of cores and the nature of the task.
Model solutions
| Question 1[1 mark] | |
|---|---|
| Answer or working | Marks |
| one accurate paired distinction, for example MAC addresses identify interfaces on the local link whereas IP addresses are logical addresses used to route between networks; alternatively credit a normally hardware-assigned MAC versus a network-assigned/changeable IP, without requiring permanence | B1 |
| Final answer: A MAC address identifies a network interface for local-link delivery; an IP address is a logical address used for routing between networks. MAC addresses can be changed/spoofed. One valid paired difference is sufficient. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| encryption converts plaintext to ciphertext requiring the appropriate key to read, protecting confidentiality | B1 |
| disk cleanup removes unnecessary/temporary files to reclaim storage space | B1 |
| Final answer: Encryption software transforms plaintext to ciphertext readable with the appropriate key, protecting confidentiality. Disk cleanup removes unneeded/temporary files to reclaim storage space; it does not generally defragment or guarantee faster CPU execution. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| ROM retains wash programs without power, whereas RAM would lose them | B1 |
| fixed wash-control programs do not normally change, so persistent read-only firmware is suitable | B1 |
| Final answer: ROM retains the wash programs after power is removed. These fixed programs must be available at startup and should resist accidental modification; RAM is volatile and would lose them when switched off. | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| a correct method using binary place values (128, 64, 32, 16, 8, 4, 2, 1) | M1 |
| 00010110 | A1 |
| Question 5[2 marks] | |
|---|---|
| Answer or working | Marks |
| one correct example, for example a virus, worm, trojan, ransomware or spyware | B1 |
| a second different correct example from the list above | B1 |
| Final answer: Any two of: virus, worm, trojan, ransomware, spyware, adware | |
| Question 6[2 marks] | |
|---|---|
| Answer or working | Marks |
| real (float) is the most appropriate data type, since the value needs decimal places | B1 |
| valid other example, for example a temperature reading, an average, or a price with pence | B1 |
| Final answer: Real/float; another example could be a temperature or an average, which also need decimal places | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| the loop runs with i taking the values 1, 2, 3, 4 and 5 in turn | B1 |
| the if statement only adds i to total when i mod 2 equals 0, meaning i is even | B1 |
| so only i = 2 and i = 4 are added to total, giving 2 + 4 = 6 | B1 |
| the output is 6 | A1 |
| Final answer: 6 (only the even values, 2 and 4, are added) | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| PC holds the address of the next instruction to be fetched | B1 |
| MAR holds the address of the memory location currently being accessed | B1 |
| MDR holds the data or instruction that is being transferred to or from memory | B1 |
| CIR holds the instruction currently being decoded and executed | B1 |
| Final answer: PC: address of next instruction. MAR: address being accessed. MDR: data/instruction being transferred. CIR: instruction being decoded/executed | |
| Question 9[2 marks] | |
|---|---|
| Answer or working | Marks |
| Valid subtraction method: binary borrowing, adding the two's complement, or 69-26=43 followed by conversion. | M1 |
| 00101011; accept a correct answer without working for both marks. | A1 |
| Final answer: 00101011 | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| identify ransomware | B1 |
| loss of access to patient records/clinical systems can delay or disrupt treatment | B1 |
| disruption can endanger patients, making rapid recovery especially important; payment does not guarantee restoration | B1 |
| Final answer: This is ransomware. Unavailable records or systems can delay treatment and endanger patients; protected backups and recovery are critical, and payment does not guarantee access. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| sending protocol: SMTP (Simple Mail Transfer Protocol) | B1 |
| SMTP is used to send an email from the sender's client to their mail server, and between mail servers | B1 |
| receiving protocol: for example POP3 or IMAP | B1 |
| this protocol is used to retrieve or download email from a mail server to the recipient's device or client | B1 |
| Final answer: SMTP sends the email to and between mail servers; POP3 or IMAP retrieves the email from the mail server to the recipient's device | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| HDDs use spinning platters and moving heads | B1 |
| drops during operation can damage that mechanism/data, whereas SSDs have no moving parts and resist such shocks better | B1 |
| portable SSDs typically use less power than portable HDDs | B1 |
| lower power demand extends operation from the travelling device battery; both devices still require power | B1 |
| Final answer: The SSD resists knocks because it has no moving heads/platters. Typically lower power use helps battery-powered operation between charging opportunities; an SSD still needs power. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| Input can return the age as a string | B1 |
| Arithmetic combines a string with integer 1 | B1 |
| Incompatible types can cause a runtime type error | B1 |
| Convert valid numeric text to integer before adding 1 | B1 |
| Final answer: A likely cause is that input returns text, but the program tries to add the integer 1 to that string. A language may reject incompatible operands with a type error. Convert valid numeric input to an integer before arithmetic, for example age = int(input()); print age + 1. Validate or handle nonnumeric input because conversion can fail. | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| SSD capacity costs more per GB but provides faster access than HDD capacity | B1 |
| infrequently accessed files can tolerate slower HDD access | B1 |
| moving those files frees expensive SSD capacity and can reduce how much SSD storage must be purchased | B1 |
| keeping active files on SSD preserves fast routine access | B1 |
| Final answer: Keep frequently used files on fast SSD for responsiveness and inactive files on cheaper-per-GB high-capacity HDD. This frees expensive SSD capacity and lowers total storage cost for a large archive; reopening moved files is slower, a trade-off acceptable for rare use. | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| identify interception/eavesdropping; accept man-in-the-middle if explained as an intermediary relaying traffic | B1 |
| readable traffic exposes user information or credentials without endpoint awareness | B1 |
| describe one suitable encryption measure, such as HTTPS/TLS or a trusted VPN | B1 |
| explain how that selected measure makes captured traffic unreadable without keys; VPN protection depends on its route/endpoints | B1 |
| Final answer: This is interception/eavesdropping; a relaying attacker is a man-in-the-middle. HTTPS/TLS with certificate validation or a correctly configured trusted VPN protects traffic in transit by encryption. One explained measure suffices. | |
| Question 16[4 marks] | |
|---|---|
| Answer or working | Marks |
| the filesystem records file locations/allocated blocks | B1 |
| logical deletion removes/marks the file reference and marks its blocks available for reuse | B1 |
| it need not overwrite every data block, so takes much less time than erasing all contents | B1 |
| old contents may remain recoverable until overwritten; subsequent activity can destroy recovery | B1 |
| Final answer: Logical deletion removes or marks the file reference and frees its allocated blocks without overwriting all their contents. It is fast because only metadata changes; old data may be recoverable until overwritten. | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| convert 8 GB to 8192 MB | M1 |
| total the three applications: 1536 + 512 + 4096 = 6144 MB | M1 |
| subtract 6144 from 8192 | M1 |
| 2048 MB remains | A1 |
| yes, the fourth application fits exactly under the stated assumption that there are no other RAM consumers | B1 |
| Final answer: 2048 MB remains; the fourth application fits exactly under the stated no-other-RAM-use assumption. | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| Initialise total to zero | B1 |
| Repeat exactly ten times | B1 |
| Read a fresh number inside the loop | B1 |
| Accumulate each number into total | B1 |
| Output total / 10 using real division after the loop | B1 |
| Final answer: Pseudocode: total = 0 for i = 1 to 10 input value total = total + value next i print total / 10 The division is real division, so a fractional average is preserved. For inputs 1 through 10 the total is 55 and the printed average is 5.5. | |
| Question 19[4 marks] | |
|---|---|
| Answer or working | Marks |
| higher clock speed increases clock cycles per second and can improve execution speed | B1 |
| larger cache can reduce slow RAM accesses when reused data fits | B1 |
| more cores can process parallel threads, but software must support this | B1 |
| high frequency has heat/power costs, so the highest clock speed is not always the best choice | B1 |
| Final answer: The claim is false: frequency increases cycles per second but cache reduces slow main-memory accesses and more cores can process parallel work. A serial or memory-bound task limits gains; heat and power constrain high frequency. Choose a balanced processor for its workload. | |
| Question 20[5 marks] | |
|---|---|
| Answer or working | Marks |
| an appropriately sized SSD can hold a 500 GB backup on one device | B1 |
| optical media need multiple discs per weekly backup, increasing handling and retention-management effort | B1 |
| SSDs tolerate transport shocks without moving heads, whereas optical discs need protection from scratches/cracks; either can fail | B1 |
| compare total cost for the two-year retained set, including drives/readers/media, rather than assuming a universal price-per-GB ordering | B1 |
| justified recommendation weighs transport durability and practical weekly capacity against the available budget; accept either technology with a defensible comparison | B1 |
| Final answer: An SSD can hold a weekly backup in one shock-resistant device; optical media need multiple protected discs. Compare total retained-media and equipment costs over two years. Either recommendation is acceptable if capacity, handling risks and cost are weighed. | |
| Question 21[5 marks] | |
|---|---|
| Answer or working | Marks |
| higher clock rate can improve responsiveness but raises power use/heat | B1 |
| larger cache may reduce slow RAM transfers but adds chip area and leakage power | B1 |
| more active cores improve parallel throughput but consume power | B1 |
| battery capacity and safe heat dissipation limit sustained CPU power in a phone | B1 |
| dynamic frequency scaling or switching off idle cores can retain peak performance while reducing typical energy use | B1 |
| Final answer: Balance workload performance against battery and thermal limits. Higher frequency, more active cores and larger caches have costs as well as benefits; frequency scaling and idle-core power management can help. Desktop CPUs also face cost, power and cooling constraints. | |
| Question 22[5 marks] | |
|---|---|
| Answer or working | Marks |
| more RAM can hold more active application data simultaneously | B1 |
| fewer inactive pages need transfer to/from secondary storage when RAM pressure is reduced | B1 |
| avoiding those slower transfers can improve multitasking responsiveness | B1 |
| a modern OS may add features/support but can also need more resources or lack old application/driver compatibility | B1 |
| qualified judgement: upgrade is useful if RAM pressure is the bottleneck, but OS age alone does not guarantee faster execution | B1 |
| Final answer: More RAM is likely to improve RAM-limited multitasking by reducing slow page transfers. A modern OS is not automatically more efficient and may need more resources or new drivers; benefit depends on workload and compatibility. | |
| Question 23[3 marks] | |
|---|---|
| Answer or working | Marks |
| independent repetitions can be divided across many GPU cores and processed simultaneously | B1 |
| the GPU can therefore offer higher throughput for this workload than eight CPU cores | B1 |
| powerful CPU cores suit complex sequential/control-heavy work better, but that strength is less relevant to these simple parallel calculations | B1 |
| Final answer: The GPU is suited to many independent identical calculations: thousands of simple cores can execute across many data elements simultaneously, giving high throughput. CPU cores are stronger for complex sequential/control-heavy tasks but eight offer less parallelism. Data transfer and non-parallel portions may limit GPU gains. | |