Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Polymers and composites

Polymers and composites are selected for their properties. Heating behaviour, reinforcement and production quantity help determine which material and process suit a product.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Decide whether the part needs to soften again when heated or retain its cured shape.
  2. Distinguish thermoplastic behaviour from thermosetting behaviour.
  3. For a composite, identify the reinforcement and the material holding it together.
  4. Compare forming processes using shape, quantity and tooling requirements.

Worked example

A glass-fibre panel contains fibres held in cured resin. Explain why the two constituents are used together.

  1. The glass fibres provide reinforcement and can improve strength compared with resin alone.
  2. The resin binds the fibres and holds the panel shape.
  3. Check the fibre arrangement against the direction of loading when judging suitability.

Practice questions

Q1What happens to a thermoplastic when heated sufficiently for forming?Show answer

Answer: It softens and can be reshaped.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2Can a cured thermosetting polymer be remelted for reshaping in the same way?Show answer

Answer: No. Its cured structure does not soften for remoulding in that way.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3What is the role of resin in a glass-fibre composite?Show answer

Answer: It binds the fibres together and helps hold the shape.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4Why does order quantity matter when choosing a forming process?Show answer

Answer: Tooling and setup costs are spread across the number of parts made.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why injection moulding can suit a large order of identical polymer parts.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why heat resistance and electrical insulation both matter for a plug housing.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Polymers and composites worksheet pack - 4 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 4 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 4 of GCSE Design and Technology Topic Workbook 1 and chapter 4 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Polymers and composites, or which topic to write up next.

Build a full practice pack.