Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Design, testing and production

Design testing compares a prototype with a specification. Results should support a particular improvement and a measurable retest, rather than a general claim that a product is better.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Turn each requirement into a measurable test condition.
  2. Compare each prototype result with the corresponding limit.
  3. Identify which requirement fails and propose a change directed at that failure.
  4. Retest under matching conditions and repeat trials to check consistency.

Worked example

A stand carries its intended load but fails the folding-size requirement. What should the next design step address?

  1. Keep the load result as evidence for the requirement it actually tests.
  2. Change the folding arrangement to reduce the folded size.
  3. Measure the folded size again and repeat the load test to check that the modification still supports the load.

Practice questions

Q1What distinguishes a measurable specification from a vague aim?Show answer

Answer: It states a condition or limit that can be checked by a test.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2Why repeat a prototype test?Show answer

Answer: Repeated trials help show whether the result is consistent.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3Does passing a load test establish that a product meets its mass limit?Show answer

Answer: No. Mass needs to be checked against its own requirement.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4What should a proposed improvement link to?Show answer

Answer: A specific requirement and evidence of how the current design performs against it.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why a designer should retest a product after changing its shape.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why a repeatable process can help with a batch of personalised products.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Design, testing and production worksheet pack - 4 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 8 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 8 of GCSE Design and Technology Topic Workbook 1 and chapter 8 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Design, testing and production, or which topic to write up next.

Build a full practice pack.