Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Tolerances and Quality Control

Tolerances define acceptable variation in a dimension. Quality control compares measured parts with those limits, using consistent units and the stated rule for boundary values.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Identify the nominal dimension and its permitted variation.
  2. Find the lower and upper acceptable limits in the same units.
  3. Apply the stated boundary rule when classifying each measurement.
  4. Separate the measured batch result from claims about future production.

Worked example

A measured dimension is exactly on its stated upper tolerance limit. How should it be classified if both limits are inclusive?

  1. Inclusive limits allow a measurement equal to either boundary.
  2. The part conforms to that dimension requirement.
  3. It still needs any other required checks; one acceptable dimension does not establish complete product quality.

Practice questions

Q1What is a nominal dimension?Show answer

Answer: The stated target dimension around which variation is permitted.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2What does an inclusive tolerance limit mean?Show answer

Answer: A measurement equal to the limit is acceptable.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3Why convert units before a tolerance comparison?Show answer

Answer: A comparison is meaningful only when the dimensions use compatible units.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4Can a batch defect rate establish the exact rate for the next batch?Show answer

Answer: No. It describes the measured batch; future production can differ.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why a part outside the lower tolerance limit should be rejected for that dimension.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why inspection records should retain individual measurements as well as a pass count.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Tolerances and Quality Control worksheet pack - 5 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 10 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 2 of GCSE Design and Technology Topic Workbook 2 and chapter 10 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Tolerances and Quality Control, or which topic to write up next.

Build a full practice pack.