Biological Molecules, Food Tests and Enzymes
Carbohydrates, lipids and proteins are the main biological molecules, built from smaller units. Students must name the elements in each group, link each large molecule to the small units it is built from, carry out and interpret the iodine, Benedict's, biuret and ethanol emulsion tests, and explain how enzymes, which are protein catalysts with a specific active site, are affected by temperature and pH, including why denaturing is permanent and why the rate of a reaction can be found as 1 divided by the time taken.
Before you start
No prerequisites. You can start here.
Method
- Learn the elements first, because they are the quickest marks to secure: carbohydrates contain carbon, hydrogen and oxygen; lipids (fats and oils) also contain only carbon, hydrogen and oxygen; proteins contain carbon, hydrogen, oxygen and nitrogen, and some also contain sulfur. Nitrogen is the element that separates proteins from the other two groups.
- Match each large molecule to its smaller units, which are also called monomers when many identical or similar units are joined into a polymer: starch, glycogen and cellulose are polymers of glucose; a protein is a chain of amino acids; a lipid (triglyceride) is one glycerol joined to three fatty acids. Starch is the energy store in plants, glycogen is the energy store in animals, and both are insoluble, so they do not affect the water balance of the cell.
- Know each food test as three things: the reagent, the conditions, and the colour change for positive and negative. Starch: add iodine solution, and orange-brown (yellow-brown) turns blue-black. Reducing sugar such as glucose: add Benedict's solution and heat it in a hot water bath for a few minutes; blue turns green, then yellow, then orange, then brick-red as the sugar concentration rises, and the solution stays blue if no reducing sugar is present. Protein: add biuret reagent, and blue turns purple (violet). Lipid: shake the sample with ethanol, then pour the clear liquid into water, and a cloudy white emulsion shows lipid is present, while a clear liquid shows it is absent.
- Define an enzyme precisely: an enzyme is a biological catalyst, which means it speeds up a reaction in a living thing and is not used up. Every enzyme is a protein. Its shape includes an active site, the region where the substrate binds to make an enzyme-substrate complex, after which the products are released. Because only a substrate with a matching shape fits the active site, each enzyme is specific to one reaction (the lock and key idea).
- Describe the effect of temperature as two separate stages. From a low temperature up to the optimum, the rate rises because the enzyme and substrate particles move faster, collide more often and collide with more energy. Above the optimum the rate falls steeply because the bonds that hold the protein in shape break, the active site changes shape, the substrate no longer fits and the enzyme is denatured. At very low temperatures an enzyme is slowed, not denatured, and it works again when warmed, but denaturing by heat cannot be reversed.
- Describe the effect of pH in the same way. Each enzyme has an optimum pH: pepsin in the stomach works best in acid conditions, while amylase in saliva works best near neutral. Moving far from the optimum, in either direction, changes the shape of the active site and denatures the enzyme, so the rate falls to almost nothing.
- For investigation data, find the rate before you describe a pattern: where the time taken for a change is measured, rate is proportional to 1 divided by time, so a shorter time means a faster rate. Name the variable you change, the variable you measure and the variables you keep the same (volumes, concentrations, and the other of temperature or pH), and repeat readings so that a mean can be calculated.
Common mistakes
MistakeWriting that a high temperature kills an enzyme, or that a cold enzyme is denatured.
InsteadEnzymes are molecules, not living things, so they are denatured, not killed. Heat above the optimum changes the shape of the active site for good. Cold only slows the reaction, and the enzyme works again when warmed.
MistakeDescribing the Benedict's test without heating, or giving a single colour change such as 'it goes red'.
InsteadBenedict's solution needs a hot water bath for a few minutes. The colours run blue, green, yellow, orange and brick-red as the amount of reducing sugar rises, and blue means none was found.
MistakeSaying the enzyme is used up, or that the substrate fits the active site because both are the same shape.
InsteadAn enzyme is not used up and can work again. The substrate has a shape that is complementary to the active site, meaning it fits like a key in a lock, which is why each enzyme is specific to one type of substrate.
MistakeTaking a longer time as a faster reaction when the data table gives the time taken for a change.
InsteadA longer time means a slower reaction, because the rate is proportional to 1 divided by the time. Work out 1 / time (or 1000 / time) for each reading before describing the pattern.
Worked examples
Example 1
A student mixes the enzyme amylase with starch solution at four temperatures and measures how long the starch takes to disappear, using iodine on samples taken every few seconds. The times are 400 s at 15 degrees C, 160 s at 25 degrees C, 50 s at 35 degrees C and 80 s at 45 degrees C. Calculate the rate of reaction at each temperature as 1000 divided by the time in seconds, and describe what the results show.
- The time taken is the time for the starch to be used up, so a shorter time means a faster reaction. The rate is found as 1 divided by time, and multiplying by 1000 gives numbers that are easier to compare.
- At 15 degrees C: 1000 / 400 = 2.5.
- At 25 degrees C: 1000 / 160 = 6.25.
- At 35 degrees C: 1000 / 50 = 20.
- At 45 degrees C: 1000 / 80 = 12.5.
- The rate rises from 2.5 to 6.25 to 20 as the temperature goes from 15 to 35 degrees C, so the reaction at 35 degrees C is 20 / 2.5 = 8 times as fast as at 15 degrees C (check: 400 / 50 = 8). The rate then falls to 12.5 at 45 degrees C.
- Explain it: warmer particles collide more often and with more energy, so the rate rises up to the optimum, which lies near 35 degrees C. At 45 degrees C some of the amylase is being denatured as its shape changes, so fewer substrate molecules fit an active site and the rate falls. The optimum is therefore near 35 degrees C, although these four readings cannot place it more exactly.
Example 2
A student tests two foods for different molecules. Food X: iodine turns blue-black, biuret stays blue, Benedict's (heated) stays blue. Food Y: iodine stays orange-brown, biuret turns purple, Benedict's (heated) stays blue. Both are then shaken with ethanol and poured into water: X gives a clear liquid and Y gives a cloudy white emulsion. State what each food contains, and name the element that Y must contain which food X need not contain.
- Read each test on its own, and write down what a positive result looks like: iodine blue-black means starch, biuret purple means protein, Benedict's (heated) any colour other than blue means reducing sugar, a cloudy white emulsion in the ethanol test means lipid.
- Food X: iodine is positive, so X contains starch. Biuret and Benedict's stay blue, so there is no protein and no reducing sugar. The ethanol test is clear, so there is no lipid.
- Food Y: iodine stays orange-brown, so there is no starch. Biuret turns purple, so Y contains protein. Benedict's stays blue, so there is no reducing sugar. The ethanol test gives a cloudy white emulsion, so Y also contains lipid.
- Proteins contain nitrogen, and carbohydrates and lipids do not. Y contains protein, so Y must contain nitrogen.
- Final answer: X contains starch only; Y contains protein and lipid; Y must contain nitrogen.
Practice questions
Q1[1 mark]Name the element that is always present in a protein but is not present in a carbohydrate or a lipid.Show answer
Answer: Nitrogen (some proteins also contain sulfur, but nitrogen is in every protein).
Q2[1 mark]A colourless sample is added to biuret reagent and the mixture turns from blue to purple. State what this shows.Show answer
Answer: That the sample contains protein.
Q3[1 mark]Which one of these is a correct description of an enzyme? A. a lipid that stores energy; B. a protein that acts as a biological catalyst; C. a carbohydrate that is made of glucose; D. a molecule that is used up in the reaction it speeds up.Show answer
Answer: B. An enzyme is a protein that acts as a biological catalyst. A is wrong because enzymes are not lipids, C is wrong because enzymes are proteins, and D is wrong because a catalyst is not used up.
Q4[3 marks]Describe how to test a food sample for reducing sugar, and state the result for a sample that contains a high concentration of glucose.Show answer
Answer: Add Benedict's solution to the sample and heat it in a hot water bath for a few minutes. A high concentration of glucose gives a brick-red (orange-red) precipitate; the solution stays blue if there is no reducing sugar.
Q5[2 marks]A student repeats an enzyme experiment three times and collects 24 cm3, 27 cm3 and 24 cm3 of gas. Calculate the mean volume.Show answer
Answer: 25 cm3. The total is 24 + 27 + 24 = 75 cm3, and 75 / 3 = 25 cm3.
Q6[3 marks]A sample of an enzyme is heated to 80 degrees C and then cooled to its optimum temperature, but it no longer works. Explain why.Show answer
Answer: The high temperature broke the bonds that hold the enzyme in shape, so the active site changed shape and the enzyme was denatured. This cannot be reversed by cooling, so the substrate still does not fit the active site.
Exam-style questions
Written in the style of a IGCSE Science exam paper, with a full mark scheme.
Exam tips
- Learn each food test as a three-part line: reagent, condition, result, for example 'Benedict's, heat in a hot water bath, blue to brick-red'. Write all three parts every time you describe a test.
- For a temperature or pH graph, describe the rise to the optimum first, then the fall after it, and give the reason for each part in terms of collisions and the shape of the active site.
- When a question says 'explain', link the cause to the effect in steps: temperature changes the bonds, the bonds change the shape of the active site, the substrate no longer fits, so the rate falls.
Q1[3 marks]Name the two small units that join to make one triglyceride (lipid) molecule, and name the small unit that joins in a long chain to make a protein.Show mark scheme
Tick each line you got.
Nothing ticked yet - 3 available
Q2[4 marks]A student measures the time for the enzyme catalase, from liver, to produce 20 cm3 of oxygen. At 30 degrees C it takes 200 s and at 40 degrees C it takes 125 s. Calculate the rate of reaction at each temperature as 1000 divided by the time in seconds, and state how many times faster the reaction is at 40 degrees C than at 30 degrees C.Show mark scheme
Tick each line you got.
Nothing ticked yet - 4 available
Q3[5 marks]A food sample is tested with four reagents. Iodine solution stays orange-brown. Benedict's solution, heated in a water bath, goes from blue to orange. Biuret reagent stays blue. The ethanol emulsion test leaves a clear liquid. State what the sample contains and what it does not contain, and describe how the Benedict's test must be carried out for the result to be valid.Show mark scheme
Tick each line you got.
Nothing ticked yet - 5 available
See real IGCSE Science past-paper questions, with official mark schemes
Free printable worksheet
Want more practice on paper? Download the Biological Molecules, Food Tests and Enzymes worksheet pack - 7 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.
This topic is chapter 11 of IGCSE Biology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 11 of IGCSE Biology Topic Workbook and chapter 10 of IGCSE Biology 10-Minute Tests, free printable practice books.
Other versions of this worksheet: