Revision Library
Choose a subject
Menu
Science
Need a new topic?
Missing a topic, found a bug, or want something added?
KS3 Science · Topic guide

Working Scientifically: Data, Graphs and Evaluation

Working scientifically after the experiment is about recording, processing, displaying and evaluating data. Measurements are recorded in a table with the quantity and unit in each column heading, not repeated in every cell. The resolution of an instrument is its smallest division, so a ruler marked in millimetres can be read to 0.1 cm. Accuracy is how close a reading is to the true value, precision is how close repeat readings are to each other, and a result can be precise without being accurate. Repeat readings let you calculate a mean and the range, and spot an anomaly, a reading that does not fit the pattern. Investigate an unusual reading and repeat the measurement where possible. Exclude it only with a stated justification, recording which result was excluded and why. Use a line graph when both variables are continuous, with the independent variable on the x-axis, and a bar chart when the independent variable is categoric. A line of best fit shows the trend and need not pass through every point. A conclusion states the pattern in the results, using data, and an evaluation comments on the quality of the method and how it could be improved.

Year 7-9 (KS3)Working ScientificallyNational Curriculum

Before you start

Make sure you're comfortable with these topics first:

Method

  1. Draw a results table with the independent variable in the first column. Put the quantity and unit in the heading, for example Time (s), and record each reading to the same number of decimal places, matching the instrument's resolution.
  2. Look at the repeats for each value. Investigate an unusual reading and repeat the measurement where possible. Exclude it only with a stated justification, recording which result was excluded and why.
  3. Calculate the mean by adding the valid readings and dividing by how many there are. Calculate the range as the highest minus the lowest to show how spread out the repeats are.
  4. Choose the display: a line graph for two continuous variables (independent variable on the x-axis, dependent on the y-axis), a bar chart if the independent variable is categoric.
  5. Draw the graph: choose scales that use at least half of each axis, label both axes with quantity and unit, plot points exactly, and draw a straight line of best fit or a smooth curve through the trend. Investigate unusual readings; exclude a point only with a stated reason, recording which point was excluded and why.
  6. Write the conclusion: describe the pattern with numbers from the data (as X increases, Y decreases from ... to ...), then link it to the hypothesis and the science.
  7. Evaluate: comment on anomalies, the precision of the repeats, the resolution of the equipment and uncontrolled variables, and suggest a specific improvement that would make the results more reliable.

Common mistakes

  • MistakeAutomatically excluding an unusual reading from the mean without investigating it or giving a reason.

    InsteadInvestigate an unusual reading and repeat the measurement where possible. Exclude it only with a stated justification, recording which result was excluded and why.

  • MistakeJoining the points on a line graph dot to dot instead of drawing a line of best fit.

    InsteadDraw a smooth line or straight ruler line that follows the trend, with roughly equal points above and below, and investigate unusual readings before excluding any point with a stated reason.

  • MistakeUsing the words accurate and precise as though they mean the same thing.

    InsteadAccurate means close to the true value; precise means the repeats are close to each other. A ruler with a faulty scale can give precise but inaccurate results.

  • MistakeWriting a conclusion that only says 'the results show my prediction was right' with no numbers.

    InsteadDescribe the pattern using values from the table, for example 'as temperature rose from 20 to 60 degrees Celsius the mean time fell from 95 s to 31 s'.

Worked example

A pupil times how long a toy car takes to roll 2.0 m down a ramp for a given height. Her four readings in seconds are 3.2, 3.4, 5.1 and 3.3. (a) Identify the anomaly. (b) Calculate the mean time, leaving out the anomaly. (c) Calculate the range of the valid readings.

  1. Compare the readings: 3.2, 3.4 and 3.3 are close together, but 5.1 is far from them. The anomaly is 5.1 s (perhaps the stopwatch was stopped late).
  2. Add the valid readings: 3.2 + 3.4 + 3.3 = 9.9 s.
  3. Divide by the number of valid readings: 9.9 / 3 = 3.3 s. This is the mean time.
  4. Range of the valid readings = highest - lowest = 3.4 - 3.2 = 0.2 s.
  5. Statement to write: the mean time is 3.3 s (anomaly of 5.1 s excluded); the valid repeats are precise because the range is only 0.2 s.

Practice questions

Q1[1 mark]A thermometer is marked in steps of 1 degree Celsius. State its resolution.Show answer

Answer: 1 degree Celsius, because the smallest division on the scale is 1 degree.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2[1 mark]Write a suitable column heading for the time taken to boil a kettle, measured in seconds.Show answer

Answer: Time (s) (or Time / s), with the unit in the heading and not in every cell.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3[3 marks]Readings of plant height (mm) are 21, 23, 22 and 54. State the anomaly and calculate the mean of the remaining readings.Show answer

Answer: Anomaly: 54 mm. Mean = (21 + 23 + 22) / 3 = 22 mm.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4[2 marks]A dart player's three darts all land close together but far from the bullseye. Say whether the throws are precise, accurate, or both.Show answer

Answer: Precise but not accurate: the darts are close to each other, but not close to the true target.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q5[2 marks]Choose a line graph or a bar chart for plotting the average mass of four different types of fruit. Explain your choice.Show answer

Answer: A bar chart, because the type of fruit is a categoric variable, not a continuous one.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q6[1 mark]Three repeat temperature readings are 41.0, 43.0 and 42.0 degrees Celsius. Calculate the range.Show answer

Answer: 2.0 degrees Celsius (43.0 - 41.0).

Got it right?
Q7[2 marks]A measuring cylinder has divisions every 2 cm3. A pupil records a volume as 37.62 cm3. Comment on this value.Show answer

Answer: It is not a sensible recording: the cylinder can only be read to about the nearest 1 or 2 cm3, so the extra decimal places give a false impression of precision.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q8[2 marks]A graph of stretch against force for a spring gives a straight line through the origin. Describe the relationship.Show answer

Answer: Stretch is directly proportional to force: doubling the force doubles the stretch.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q9[2 marks]A stopwatch reads to 0.01 s, but a pupil's hand reaction time is about 0.2 s. Say why the timings are less accurate than the stopwatch resolution suggests.Show answer

Answer: The human delay in starting and stopping is far larger than 0.01 s, so the real uncertainty is about 0.2 s despite the fine resolution of the stopwatch.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a KS3 Science exam paper, with a full mark scheme.

Exam tips

  • Put the unit in the column heading or axis label only, and give the same number of decimal places for every reading from one instrument.
  • In an evaluation, name a specific weakness and a specific fix, such as 'a light gate removes the reaction-time error from the stopwatch'.
  • Check graph scales before plotting: the points should fill at least half of each axis, and the independent variable goes on the x-axis.
Q1[6 marks]A pupil measures the rate of photosynthesis in pondweed by counting bubbles released per minute at different distances from a lamp. Each distance was tested three times. The table gives the number of bubbles per minute. At 10 cm: 42, 44, 43. At 20 cm: 25, 24, 38. At 30 cm: 12, 11, 12. At 40 cm: 6, 5, 6. (a) Identify the anomalous reading. (1) (b) Calculate the mean number of bubbles per minute at 20 cm, leaving out the anomaly. (2) (c) Describe the pattern shown by the means, using data. (2) (d) Suggest one improvement that would make the investigation more reliable. (1)Show mark scheme

Tick each line you got.

Nothing ticked yet - 6 available

Got it right?
Q2[5 marks]A pupil measures the length of a leaf with a ruler marked in millimetres and records 12.400 cm. A second pupil measures the same leaf five times and gets 12.4, 12.4, 12.5, 12.4 and 12.4 cm, but the leaf's true length is 12.9 cm because the ruler's scale was printed 0.5 cm out of place. (a) Explain why 12.400 cm is not a sensible record. (2) (b) Describe the precision of the second pupil's measurements. (1) (c) Explain whether the second pupil's measurements are accurate. (2)Show mark scheme

Tick each line you got.

Nothing ticked yet - 5 available

Got it right?

See real KS3 Science past-paper questions, with official mark schemes 

Free printable worksheet

Want more practice on paper? Download the Working Scientifically: Data, Graphs and Evaluation worksheet pack - 8 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This worksheet is chapter 7 of KS3 Science Year 9 Topic Workbook, a free printable practice book.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Working Scientifically: Data, Graphs and Evaluation, or which topic to write up next.

Build a full practice pack.