Revision Library
Choose a subject
Menu
Science
Need a new topic?
Missing a topic, found a bug, or want something added?
KS3 Science · Topic guide

Working Scientifically: Variables, Fair Tests and Planning

Working scientifically is how scientists find things out, and it is built into every KS3 science topic. Planning an investigation starts with a testable question and a prediction, ideally a hypothesis with a reason. The independent variable is the one factor you deliberately change; the dependent variable is the one you measure to see the effect; control variables are everything else you keep the same so the test is fair. Categoric variables are described in words (type of material) and continuous variables are measured on a scale (temperature in degrees Celsius). Good planning also chooses a sensible range and number of values, decides how many repeats to take, selects equipment that can measure the dependent variable well, and identifies hazards and the risk they carry. A hazard is something that could cause harm (hot water, a sharp edge); a risk is the chance of that harm happening, which you reduce with a control measure such as safety goggles.

Year 7-9 (KS3)Working ScientificallyNational Curriculum

Before you start

No prerequisites. You can start here.

Method

  1. Turn the idea into a testable question: how does changing X affect Y? Write a prediction, and add a reason from scientific ideas to make it a hypothesis.
  2. Name the independent variable (what you change), the dependent variable (what you measure, with units) and say whether the independent variable is categoric or continuous.
  3. List the control variables and say how you will keep each one the same, for example 'use 100 cm3 of water every time, measured in a measuring cylinder'.
  4. Choose the range and intervals for the independent variable: at least five values for a continuous variable, spread evenly and covering a useful range.
  5. Choose the equipment and say what it measures and to what resolution. Plan to repeat each reading at least three times so that you can spot anomalies and calculate a mean.
  6. Identify each hazard, say what harm it could cause, and write a control measure that lowers the risk (for example tie back hair, use a heatproof mat, wear eye protection).
  7. Write the method as numbered steps another pupil could follow exactly, and draw a blank results table with headings and units in the top row.

Common mistakes

  • MistakeSaying the dependent variable is 'what I will change' or mixing it up with the independent variable.

    InsteadThe dependent variable depends on the change you make, so it is the thing you measure. The independent variable is the one you choose and change on purpose.

  • MistakeWriting 'keep everything the same' as the control variables without naming any of them.

    InsteadName each control variable and say how it is kept constant, for example 'use 100 cm3 of water, measured in a measuring cylinder, every time'.

  • MistakeTreating hazard and risk as the same word, for example writing 'the risk is hot water'.

    InsteadThe hazard is the hot water. The risk is the chance of a scald. The control measure (goggles, tray, mat) is what reduces that risk.

  • MistakeTesting only two or three values of the independent variable and still drawing a line of best fit.

    InsteadPlan at least five values spread across a sensible range so that a trend can be seen.

Worked example

A pupil plans an effervescent-tablet reaction investigation to find out how water temperature affects the time until fizzing stops. Plan the investigation, naming the variables and one hazard.

  1. Question and hypothesis: does the time until fizzing stops fall as the water gets hotter? Prediction: the effervescent-tablet reaction will be faster in hotter water because particles move faster and collide more often.
  2. Independent variable: water temperature (continuous), tested at 20, 30, 40, 50 and 60 degrees Celsius. Five values over a 40 degree range is enough to show a trend.
  3. Dependent variable: time in seconds, measured with a stopwatch. Measure the time until fizzing stops, using the same endpoint for every trial.
  4. Control variables: volume of water (100 cm3 in a measuring cylinder), mass and make of tablet (same brand, same size), beaker size and shape, and no stirring. Each is kept the same so only temperature can affect the time.
  5. Repeats: do each temperature three times and calculate a mean. Investigate an unusual reading and repeat the measurement where possible. Exclude it only with a stated justification, recording which result was excluded and why.
  6. Hazard: hot water at 60 degrees Celsius could scald. Control measure: use a thermometer, fill beakers away from the edge of the bench, wear eye protection and use a kettle with a tray rather than carrying hot beakers.
  7. Results table headings: Temperature (degrees C) | Time 1 (s) | Time 2 (s) | Time 3 (s) | Mean time (s).

Practice questions

Q1[2 marks]A pupil changes the length of a pendulum string and times 10 swings. State the independent variable and the dependent variable.Show answer

Answer: Independent variable: length of the string. Dependent variable: time for 10 swings (in seconds).

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2[2 marks]Give the difference between a prediction and a hypothesis.Show answer

Answer: A prediction says what you expect to happen; a hypothesis is a testable idea that also gives a scientific reason for the prediction.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3[2 marks]A pupil tests how the colour of a surface affects how fast it warms in sunlight. Is 'colour' a categoric or a continuous variable? Explain.Show answer

Answer: Categoric, because colour is described in words (such as black, white, silver) and is not measured on a numerical scale.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4[2 marks]Plants are grown on a windowsill at different distances from the window to test the effect of light. Name two control variables.Show answer

Answer: Any two from: volume of water given, type or species of plant, size of pot, type and volume of soil, temperature, time allowed for growth.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q5[2 marks]Explain why a pupil should repeat each reading three times when finding the time for a ball to roll down a ramp.Show answer

Answer: Repeats show how much the readings vary and allow a mean to be calculated. Investigate an unusual reading and repeat the measurement where possible. Exclude it only with a stated justification, recording which result was excluded and why.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q6[1 mark]A pupil investigates how the mass of a parachute load affects its fall time. She uses loads of 10 g, 20 g and 30 g. Suggest one improvement to the range of values.Show answer

Answer: Use more values (at least five, such as 10, 20, 30, 40 and 50 g) so a pattern can be seen and a line drawn with confidence.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q7[3 marks]Hot wax is melted in a beaker over a Bunsen burner in a lesson. State the hazard, the risk and one control measure.Show answer

Answer: Hazard: hot wax or a flame can burn skin. Risk: spilling or touching it could cause a burn. Control measure: use a heatproof mat, wear eye protection and keep the beaker away from the bench edge.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q8[2 marks]A pupil compares how fast sugar dissolves in water at different temperatures but uses a different amount of sugar each time. Say why this is not a fair test.Show answer

Answer: The amount of sugar is a control variable that was not kept the same, so any change in dissolving time may be caused by the sugar amount rather than the temperature.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q9[2 marks]Choose the better measuring instrument for 25 cm3 of water: a beaker with a line at 25 cm3 or a measuring cylinder. Give a reason.Show answer

Answer: The measuring cylinder, because it has a finer scale (better resolution), so the volume can be read more accurately.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a KS3 Science exam paper, with a full mark scheme.

Exam tips

  • Use the words independent, dependent and control in your plan, and give the unit or the piece of equipment for the measured variable.
  • For a planning question, finish with a short results table with headings and units in the top row. It shows what you will record.
  • When asked how to improve a plan, suggest something specific such as more values or more repeats, not just 'be more careful'.
Q1[7 marks]A pupil investigates how the height from which a ball is dropped affects the height it bounces to. She drops a ball from 20 cm, 40 cm, 60 cm, 80 cm and 100 cm and measures the first bounce height with a metre rule. (a) Name the independent variable. (1) (b) Name the dependent variable and give its unit. (2) (c) Give two control variables. (2) (d) State one hazard and one way of reducing the risk. (2)Show mark scheme

Tick each line you got.

Nothing ticked yet - 7 available

Got it right?
Q2[6 marks]Plan an investigation to find out whether the surface area of a piece of antacid tablet affects the speed at which it reacts with 50 cm3 of dilute hydrochloric acid, measured by the time for the fizzing to stop. Your plan should include the variables, the equipment, how you will make the test fair, how you will make the results reliable, and safety. (6)Show mark scheme

Tick each line you got.

Nothing ticked yet - 6 available

Got it right?

See real KS3 Science past-paper questions, with official mark schemes 

Free printable worksheet

Want more practice on paper? Download the Working Scientifically: Variables, Fair Tests and Planning worksheet pack - 6 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This worksheet is chapter 5 of KS3 Science Year 9 Topic Workbook, a free printable practice book.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Working Scientifically: Variables, Fair Tests and Planning, or which topic to write up next.

Build a full practice pack.