Revision Library
Choose a subject
Menu
Science
Need a new topic?
Missing a topic, found a bug, or want something added?
KS3 Science · Topic guide

Materials: Ceramics, Polymers and Composites

Materials are chosen by matching their properties to the job. Ceramics, such as bricks, tiles, porcelain and pottery, are made by shaping clay and heating it strongly in a kiln. They are hard, have very high melting points, resist chemical attack and are poor conductors of heat and electricity, but they are brittle, so they crack or shatter when dropped or hit. Glass is often grouped with ceramics at this level. Polymers are made of very long chain molecules built from many small units joined together. Plastics and rubber are polymers. They have low density, are poor conductors of heat and electricity, resist water and can be moulded into almost any shape. Thermosoftening polymers soften when heated and harden again when cooled, so they can be remelted and reshaped. Thermosetting polymers have strong links joining their chains together, so they stay rigid when heated and char or burn instead of melting. A composite is made by combining two or more different materials so that the finished material has better properties than any single part. Each part keeps its own identity. Reinforced concrete (steel rods in concrete), fibreglass (glass fibres in plastic), carbon fibre (carbon fibres in a plastic resin) and plywood (layers of wood glued together) are composites.

Year 7-9 (KS3)ChemistryNational Curriculum

Before you start

Make sure you're comfortable with these topics first:

Method

  1. Identify the property each part of the object needs. Write each requirement as a short phrase, such as does not melt in a hot oven, does not conduct electricity, or is strong but light.
  2. Sort the candidate materials into ceramic, polymer or composite, then recall the typical properties of each group: ceramics are hard, brittle and heat-resistant; polymers are light, flexible and insulating; composites combine the strengths of their parts.
  3. Match each requirement to a property. Name the material and give a reason that links the property to the job, for example: a polymer, because it is an electrical insulator and so stops the current reaching the user.
  4. Check for a drawback that rules a material out. A brittle ceramic is a poor choice for something that is dropped or hit, and a polymer that softens when heated is a poor choice for something that gets hot.
  5. For a polymer that will be heated, decide whether it is thermosoftening or thermosetting. If it must keep its shape when hot, choose thermosetting. If it needs to be remelted and reshaped, choose thermosoftening.
  6. For a composite, name the parts and say what each one contributes. Then state why the combination is better than either part alone, and mention any limitation such as cost.

Common mistakes

  • MistakeBelieving that a hard material cannot break, so a ceramic such as a plate or tile must be tough as well as hard.

    InsteadHard means resistant to scratching and wear. Ceramics are hard but brittle, so they crack or shatter when dropped or hit. Hard and brittle describe different properties.

  • MistakeBelieving that every polymer melts when heated and can be reshaped, so any plastic object can be recycled by melting.

    InsteadOnly thermosoftening polymers soften and can be remelted. Thermosetting polymers have strong links between their chains, so they stay rigid when heated and char or burn rather than melt.

  • MistakeBelieving that a composite is a single new substance made by a chemical reaction, or just a simple mixture with no purpose.

    InsteadA composite is made by combining two or more materials, such as steel and concrete, so that each part keeps its own identity. The parts are chosen so that together they give better properties than either alone.

Worked examples

Example 1

A mains plug has three parts: an outer case, metal pins and a small fuse cartridge body that holds a thin wire. For each part, choose a suitable type of material and give the property that makes it suitable.

  1. List what each part must do. The case must stop the user touching live metal and must not soften when the plug warms up. The pins must carry current into the socket. The fuse body must hold the wire without melting if the wire heats up and breaks.
  2. Choose the case material: a thermosetting polymer. It is an electrical insulator, so current cannot pass to the user. It is also rigid and keeps its shape when warm, because it does not soften on heating.
  3. Choose the pin material: a metal such as brass. The pins must be conductors so that current can pass through them; a polymer or ceramic would block the current.
  4. Choose the fuse body material: a ceramic. It has a very high melting point, so it survives the heat if the wire inside gets hot. It is also an electrical insulator and a poor conductor of heat.
  5. Check for drawbacks. A ceramic case would be too brittle for a plug that is dropped, so a tough polymer is better for the outside. A ceramic fuse body is not dropped or knocked, so brittleness is not a problem there.
  6. State the final answer: case, thermosetting polymer (insulator, keeps its shape); pins, metal (conductor); fuse body, ceramic (very high melting point, insulator).

Example 2

A fibreglass panel has a total mass of 2.50 kg, of which 0.80 kg is glass fibre and the rest is plastic resin. Calculate the percentage of the panel's mass that is glass fibre and the percentage that is resin. A second panel of mass 4.0 kg is 45 percent glass fibre by mass; calculate the mass of glass fibre in it.

  1. Find the mass of resin in the first panel: 2.50 - 0.80 = 1.70 kg.
  2. Use percentage = part / whole x 100. For the glass fibre: 0.80 / 2.50 x 100 = 32 percent.
  3. For the resin: 1.70 / 2.50 x 100 = 68 percent.
  4. Check that the percentages add up to 100: 32 + 68 = 100, so the working is consistent.
  5. For the second panel, mass of glass fibre = 45 / 100 x 4.0 = 1.8 kg.
  6. State the final answer: the first panel is 32 percent glass fibre and 68 percent resin; the second panel contains 1.8 kg of glass fibre.

Practice questions

Q1[3 marks]Name the group (ceramic, polymer or composite) that each of these belongs to: a porcelain washbasin, a polythene carrier bag, a carbon fibre bicycle frame.Show answer

Answer: Porcelain washbasin: ceramic. Polythene carrier bag: polymer. Carbon fibre bicycle frame: composite.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2[2 marks]The inside of a kiln is lined with ceramic bricks. State two properties of ceramics that make them suitable for this.Show answer

Answer: Any two from: very high melting point; poor conductor of heat (thermal insulator); does not react chemically with the hot gases.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3[2 marks]Explain why the outer covering of an electrical cable is made from a polymer.Show answer

Answer: The polymer is an electrical insulator, so the current cannot pass into the user or other objects. It is also flexible, so the cable can bend.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4[2 marks]A sample of polymer A melts into a runny liquid when heated and sets hard again on cooling. A sample of polymer B does not melt but turns black and burns. State which is thermosoftening and which is thermosetting.Show answer

Answer: Polymer A is thermosoftening. Polymer B is thermosetting.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q5[2 marks]Reinforced concrete beams contain steel rods. Explain why steel is added to the concrete.Show answer

Answer: Concrete is strong when squashed but weak when stretched or pulled. Steel is strong when stretched, so the rods stop the beam cracking when it bends. The combination is stronger than concrete alone.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q6[2 marks]Give one example of a composite and name the materials it is made from.Show answer

Answer: Any correct example, such as fibreglass (glass fibres in plastic), reinforced concrete (steel rods in concrete), carbon fibre (carbon fibres in plastic resin) or plywood (layers of wood glued together).

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q7[2 marks]A student says: 'All plastics melt when heated, so any plastic object can be melted down and made into something new.' Explain why this is not always true.Show answer

Answer: Thermosetting polymers do not melt or soften when heated; they char or burn instead. They cannot be melted and reshaped. Only thermosoftening polymers can be remelted.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a KS3 Science exam paper, with a full mark scheme.

Exam tips

  • Link each property to the job in one sentence: name the property and say what it does, for example a thermal insulator, so less heat reaches the hand.
  • When asked to choose a material, name it and give a reason that matches the requirement in the question. Saying a material is good or strong, without saying why that matters for the job, is too vague.
  • For a composite, name both parts and say what each one contributes, such as steel resisting stretching and concrete resisting squashing.
Q1[6 marks]A technician records data about four materials. Material P: ceramic, melting point above 1500 degrees Celsius, hard, breaks if hit sharply. Material Q: thermosoftening polymer, softens at 90 degrees Celsius, flexible, low density. Material R: thermosetting polymer, does not soften when heated but chars above 300 degrees Celsius, rigid, electrical insulator. Material S: carbon fibre composite, very stiff, very strong, low density. (a) Choose the material for a food box that is to be recycled by melting and reshaping, and explain your choice. (b) Choose the material for the lining of a furnace that reaches 1200 degrees Celsius, and explain your choice. (c) Choose the best material for a racing bicycle frame and give one reason from the data.Show mark scheme

Tick each line you got.

Nothing ticked yet - 6 available

Got it right?
Q2[6 marks]A builder makes a concrete beam that rests on a support at each end. A heavy load presses down on the middle, so the beam bends and the lower edge is stretched. Concrete is strong when squashed but weak when stretched. (a) The beam is made of concrete with steel rods placed near the lower edge. Name this type of material and explain what the name means. (b) Explain why the steel rods are placed near the lower edge. (c) Concrete and steel expand by almost the same amount when the temperature rises. Explain why this is important in a reinforced concrete beam.Show mark scheme

Tick each line you got.

Nothing ticked yet - 6 available

Got it right?

See real KS3 Science past-paper questions, with official mark schemes 

Free printable worksheet

Want more practice on paper? Download the Materials: Ceramics, Polymers and Composites worksheet pack - 4 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This worksheet is chapter 4 of KS3 Science Year 9 Topic Workbook, a free printable practice book.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Materials: Ceramics, Polymers and Composites, or which topic to write up next.

Build a full practice pack.