Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Responsive materials

Responsive materials change when a stimulus is applied. Designers check the response, recovery and repeatability rather than assuming that one successful demonstration establishes reliable performance.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Identify the stimulus separately from the observed material change.
  2. Check the conditions over which the response occurs.
  3. Remove or reverse the stimulus and observe how far the material recovers.
  4. Repeat cycles to check whether the response weakens or leaves a residual change.

Worked example

A fictional film changes colour when warmed and recovers on cooling. What needs checking for a reusable display?

  1. Check whether the colour change occurs within the display's intended temperature conditions.
  2. Check recovery when cooled to the stated conditions.
  3. Repeat heating and cooling cycles to establish whether the response remains suitable over repeated use.

Practice questions

Q1What is a stimulus?Show answer

Answer: The condition that causes a material response, such as heat or ultraviolet light.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2What does reversible mean in a material-response test?Show answer

Answer: The material returns to its starting state when the stimulus is removed or reversed.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3What is a residual change?Show answer

Answer: A change remaining after the recovery conditions have been applied.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4Why repeat response cycles?Show answer

Answer: To see whether the size of the response or the recovery changes with repeated use.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why a sample remaining bent after cooling matters when judging reversibility.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why a colour-changing teaching sample should not automatically be used as a safety indicator.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Responsive materials worksheet pack - 4 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 15 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 7 of GCSE Design and Technology Topic Workbook 2 and chapter 15 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Responsive materials, or which topic to write up next.

Build a full practice pack.