Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Electrical Systems

Electrical systems connect inputs, processing and outputs. A sensor provides information, a control stage applies a rule, and an output component produces the required action.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Identify the quantity the system senses.
  2. Separate the input device, control process and output device.
  3. Read threshold rules and operating ranges exactly as supplied.
  4. Check that component signals and ratings suit the controller and power supply.

Worked example

A light sensor controls an indicator through a circuit. Describe the input, process and output.

  1. The sensor provides the input information about light.
  2. The circuit processes that information using its switching rule.
  3. The indicator is the output that changes state as instructed by the circuit.

Practice questions

Q1What role does a sensor perform in a control system?Show answer

Answer: It supplies input information about a condition.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q2What is a switching threshold?Show answer

Answer: The value used by the controller to decide when an output changes state.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3What does an operating range describe?Show answer

Answer: The conditions or values over which a device is specified to work reliably.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4Why check a sensor output against controller input requirements?Show answer

Answer: The signal type and levels must be compatible for the controller to interpret it correctly.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why an input sensor and an output indicator should not be treated as the same part of a system.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why a designer should check an LED rating before selecting its series resistor.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Electrical Systems worksheet pack - 3 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 9 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 1 of GCSE Design and Technology Topic Workbook 2 and chapter 9 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Electrical Systems, or which topic to write up next.

Build a full practice pack.