Coastal Processes and Erosional Landforms
Coastal erosion is the wearing away and removal of the coast by the sea, and it works alongside weathering and mass movement. Waves are constructive (low, long, gentle, strong swash and weak backwash) or destructive (high, steep, weak swash and strong backwash). The sea erodes by hydraulic action (waves force water and air into cracks, and the pressure breaks rock apart), abrasion (waves hurl sand and pebbles at the cliff), attrition (loose material collides and wears into smaller, rounder pieces) and solution (slightly acidic rain and river water, and carbon dioxide dissolved in sea water, dissolve rocks such as chalk and limestone). Weathering weakens rock where it stands (freeze-thaw, and chemical weathering such as carbonation), and mass movement (rockfall, landslide/sliding, rotational slumping) carries it down the cliff. Rock type and structure decide how fast a coast retreats: resistant rock such as chalk and sandstone forms headlands, while weak boulder clay slumps quickly. Erosion leaves landforms: headlands and bays, cliffs and wave-cut platforms, and the cave, arch, stack and stump sequence. The examiner is testing whether you can name the process, explain exactly how it works, and link it to the rock and wave conditions.
Before you start
Make sure you're comfortable with these topics first:
Method
- Start every answer by naming the process or landform the question is really about: erosion (sea), weathering (in place) or mass movement (downhill). Mixing these three up is the most common way to lose marks.
- Define each erosion process in one sentence that says what the waves do and what that does to the rock: hydraulic action (air and water forced into cracks), abrasion (sediment thrown at the cliff), attrition (load wears itself), solution (rock dissolved).
- For any landform, write a numbered sequence: where waves attack first (a weakness such as a joint, or the cliff foot at high tide), what erodes there, what collapses or widens next, and what is left behind.
- Use the linking words that earn the second mark: 'so', 'which leads to', 'until'. 'Waves attack the cliff foot' is one mark; 'so the cliff is undercut and the unsupported rock above collapses' is the next.
- Bring in rock type and structure when asked why one coast erodes faster than another: joints, bedding dipping seaward, and softness (boulder clay, sand) all speed retreat, and resistant rock forms headlands.
- Use a named UK example for place-specific marks: Holderness (boulder clay, rapid retreat), Flamborough Head (chalk), or Old Harry Rocks near Swanage (chalk stacks and a stump).
- For rate questions, divide the total change by the number of years, check the units (metres per year) and say whether the answer is an average.
Common mistakes
MistakeExplaining a cave by writing that the sea 'wears away' the cliff, with no process named.
InsteadName the weakness (a joint or fault) and the processes at work there: hydraulic action forces air and water into the crack, and abrasion widens it. Naming the process is what earns the second mark.
MistakeSaying a stack becomes a stump because 'waves erode the top'.
InsteadThe base of a stack is attacked by waves, so it is undercut and collapses, while weathering weakens the upper part. The stump is the lower remnant, often covered at high tide.
MistakeWriting that attrition breaks up the cliff.
InsteadAttrition wears down the sea's own load. Pebbles collide and become smaller and rounder. It is abrasion that uses that load to wear away the cliff.
Worked example
Explain how a headland and a bay form on a coast where bands of resistant chalk and weaker clay lie at right angles to the shore. (4 marks)
- Identify the key idea: different rocks erode at different rates, so the question is about differential erosion. State this first.
- Describe the starting condition: the coast begins fairly straight, with alternating bands of resistant chalk and less resistant clay meeting the sea.
- Explain the clay: waves erode the weaker clay faster, using hydraulic action and abrasion, so it is cut back to form a bay with a gently curved shoreline.
- Explain the chalk: the resistant chalk erodes more slowly, so it is left sticking out into the sea as a headland.
- Add the consequence for the next mark: the headland is now exposed to more wave energy, because waves bend (refract) around it, while the bay is more sheltered, so later features such as caves can start on the headland.
- Check the marks: differential erosion named (1), clay erodes faster to bay (1), chalk resists to form headland (1), consequence or process detail (1). Four marks, four distinct points.
Practice questions
Q1Define hydraulic action and name the rock feature it usually attacks first.Show answer
Answer: Hydraulic action is the force of waves compressing air and water in cracks and joints in the rock. The pressure builds up and is released again and again, which widens the cracks until pieces break off. It attacks cracks and joints first.
Q2Explain the difference between weathering and erosion on a coast.Show answer
Answer: Weathering is the breakdown of rock where it stands, without it being moved, for example freeze-thaw weathering. Erosion is the sea wearing the rock away and carrying the material off, for example by abrasion. Weathering weakens a cliff so erosion removes it more easily.
Q3A marker post stood 3.2 m from a cliff edge in 2021. In 2026 the edge is 0.6 m from the post. Calculate the average annual rate of cliff retreat.Show answer
Answer: Retreat = 3.2 - 0.6 = 2.6 m. Rate = 2.6 / 5 = 0.52 metres per year (an average).
Q4An observer counts 42 waves in 3.5 minutes. Calculate the wave frequency in waves per minute and say why it does not alone show whether the waves are constructive or destructive.Show answer
Answer: 42 / 3.5 = 12 waves per minute. Frequency says nothing about wave height, steepness or the strength of swash and backwash, so those must also be known.
Q5Explain why a notch forms at the base of a cliff at high tide but a wave-cut platform is exposed at low tide.Show answer
Answer: At high tide, waves reach the cliff foot and erode it by abrasion and hydraulic action, cutting a notch. When the unsupported rock above collapses the cliff retreats, and the gently sloping rock surface left in front of it is the wave-cut platform, which is covered at high tide and visible at low tide.
Q6A grassy cliff of boulder clay slumps after a week of heavy rain. Name the type of mass movement and explain why the rain triggers it.Show answer
Answer: Rotational slumping. Rain saturates the clay, adding weight and making it slippery, and the pore water reduces the friction holding the mass on the slope. With the foot also undercut by waves, the saturated mass slides down a curved slip surface.
Q7Chalk is hard and fairly resistant to impact, but it can still be eroded by solution. Explain how.Show answer
Answer: Rain water and the carbon dioxide dissolved in sea water make weak carbonic acid, and chalk is made of calcium carbonate, so the acid reacts with it and dissolves it. The rock is removed in solution even though it is hard and resists impact from waves.
Exam-style questions
Written in the style of a GCSE Geography exam paper, with a full mark scheme.
Exam tips
- In a 'why does this coast erode faster' question, give two reasons with a link each: rock (weak, jointed) and wave energy (long fetch, exposure), then compare.
- Landform answers are sequences. Number your stages in your head and make sure each one says what caused the next.
- A named UK example does not need a long description, but a correct rock type and one correct place fact will lift a generic answer.
Q1[6 marks]Table: three cliff sections on the same stretch of coast, measured over the same 10 years. Section A: chalk, many open joints, beds dipping towards the sea. Retreat 12 m. Section B: chalk, few joints, beds almost horizontal. Retreat 4 m. Section C: boulder clay, no joints but weak and often saturated. Retreat 31 m. (a) Calculate the average annual retreat for each section. (3 marks) (b) State which section retreats fastest. (1 mark) (c) Explain why Section C retreats faster than Section B. (2 marks)Show mark scheme
Tick each line you got.
Nothing ticked yet - 6 available
Q2[6 marks]Using a named UK coastline, explain how a cave, arch, stack and stump form along a headland.Show mark scheme
Tick each line you got.
Nothing ticked yet - 6 available
See real GCSE Geography past-paper questions, with official mark schemes
Free printable worksheet
Want more practice on paper? Download the Coastal Processes and Erosional Landforms worksheet pack - 3 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.
This worksheet is chapter 7 of GCSE Geography Topic Workbook 2, a free printable practice book.
Other versions of this worksheet: