Revision Library
Choose a subject
Menu
Geography

GCSE Geography Worksheets

Choose from 68 GCSE Geography worksheet packs, covering 436 printable pages. This view is for finding a focused sheet to print: each PDF keeps one topic together and ends with its own full mark scheme.

AQAOCRWJECEduqasCCEAEdexcel
packs
68
question pages
287
printable pages
436

Free for personal and classroom use - see copyright & terms.

See the method: Changing Economic World: The Development Gap

Country X has a GNI per capita of 2,000 US dollars and a life expectancy of 61 years. Country Y has a GNI per capita of 38,000 US dollars and a life expectancy of 82 years. Calculate the difference in GNI per capita between the two countries, and state whether GNI per capita or life expectancy shows the smaller relative gap between them.

  1. Find the difference in GNI per capita: 38,000 - 2,000.
  2. Calculate: 38,000 - 2,000 = 36,000, so the GNI per capita gap is 36,000 US dollars.
  3. Compare the two countries as a ratio for each measure: GNI per capita, 38,000 / 2,000 = 19 times higher in Country Y.
  4. Life expectancy, 82 / 61 = approximately 1.3 times higher in Country Y.
  5. Since 1.3 is much smaller than 19, life expectancy shows the smaller relative gap between the two countries.

Choose and mark focused printable geography practice

A printable worksheet is most useful when it has a clear job. Start with a topic, question type or skill you want to practise, then choose a pack whose title matches that focus. The collection covers physical geography, human geography and geographical skills. Some entries are broad topic packs, while others focus on a process, example or method. Read the title and description before printing so the questions fit your current goal.

Keep a session manageable: choose one pack or a shorter available version, set a time to attempt the questions, then mark them. If a topic is unfamiliar, review your class notes first. During practice, read the command word, identify the topic or skill, and include units and show enough working for your method to be followed. Marking helps distinguish a knowledge gap from an incomplete explanation or a method error. Keep a brief note of what to revisit after marking.

Select a pack, complete focused practice and mark it

Choose practice by the point where your answer becomes uncertain. If you cannot expand GNI accurately, begin with the short EW1 retrieval check below. If the words are familiar but a map-scale conversion, graph choice or sampling justification is difficult, try the matching worked task in the sections that follow. Attempt each question before reading its steps, then compare your reasoning with the source mark scheme. This shows whether the difficulty was selecting a method, applying it or explaining what the result means.

Keep question pages, any supplied map or data, and the answer section together. Preview labels and units before printing, and leave room for working. Use your course materials to check that a pack's topic and examples fit your revision target; the catalogue titles help locate a focus but do not establish board requirements. A short retrieval prompt and a multi-part application question test different things. The GNI abbreviation check asks whether a term is available from memory; extra explanation is not a substitute for the three words. The map task asks you to convert and compare, the graph task asks you to select and interpret, and the sampling task asks you to justify and evaluate. Use the source marks as a guide to how many distinct jobs the prompt contains, then choose a manageable set of questions with one clear purpose. Start with one attempt you can complete without the answer pages, mark it against the supplied scheme, and name the missing step in your own words. Select the next question because it practises that step, not simply because it is longer or has more marks. Repeat the same question later without looking at your correction to check whether you can reproduce the reasoning independently.

Worked example. What does GNI stand for?

  1. Identify that the question asks for the expansion of the abbreviation GNI.
  2. Write the three words in the correct order, without adding an unrelated measure.

Answer: Gross National Income

Prepare the pages for an independent attempt

Choose the GEO.SK1 map-skills guide and map-skills pack when converting a measured map distance is the sticking point. This 3-mark task exposes mixing up the map measurement and the real distance, or stopping at the calculation without comparing it with the stated threshold. Keep the scale relationship and units visible through the working.

Before trying the map task, read the scale relationship as a conversion: 2 cm on the map corresponds to 1 km on the ground. The measured 5.2 cm contains 2.6 groups of 2 cm, so the real distance is 2.6 km. Check the size before writing it down: 5.2 km would be twice the measured centimetres as kilometres, while 2.6 km is below the 3 km comparison point. If your result is wrong, identify whether the slip came from dividing by the scale interval or from the final comparison. Practise another scale question if the setup is uncertain; if the calculation is secure, practise stating what the distance means with its unit. A useful self-check for a scale calculation is to write the map distance, the scale interval and the ground distance on separate lines before calculating. Here those quantities are 5.2 cm, 2 cm and 1 km. The centimetres cancel when you divide 5.2 by 2, leaving 2.6 kilometres. Keep the given conversion visible rather than treating 1:50 000 as a number to multiply by without checking the units. Then compare 2.6 with 3; the question asks for both a distance and a comparison. If either part is missing, keep that part as the focus of your next attempt.

Worked example. A footpath between a car park and a picnic site is measured as 5.2 cm on a 1:50 000 map, where 2 cm represents 1 km. (a) Calculate the real distance between the two points in kilometres. (b) State whether this distance is more or less than 3 km.

  1. 1 mark: sets up the calculation: 5.2 x (1 km / 2 cm), or 5.2 x 0.5.
  2. 1 mark: gives the correct real distance: 2.6 km.
  3. 1 mark: correctly states that this distance is less than 3 km. Final answer: 2.6 km, which is less than 3 km.

Answer: 2.6 km, which is less than 3 km.

Choose graph and sampling practice by the difficulty

Choose the GEO.SK3 graph-skills guide and graph-skills pack when the challenge is choosing and interpreting a display. This 4-mark task exposes naming a line graph without explaining why time-based change suits it, or describing a trend without using the supplied values. State the choice, connect it to continuous change, then anchor the pattern in the months and temperatures.

Use the four marks to check the parts of your response separately: identify the graph, explain the choice, describe the rise and fall, and support that description with a supplied value. The four dates are spaced across the year, while temperature changes continuously between them; a line graph makes that sequence visible. A bare answer of line graph leaves the reasoning and pattern unstated. A trend without a reference to January, July or October does not use the evidence provided. When marking, circle the first missing part. If the choice and reasoning are right but your description is vague, practise describing a trend with its start, peak and later direction. If you cannot decide which display fits, return to the graph-skills pack and compare what each type shows. When a graph question gives only selected months, describe only the pattern supported by those readings. January is the lowest listed value at 3 degrees C, July is the highest at 19 degrees C, and October is lower at 11 degrees C. The points suggest a rise from winter to summer followed by a fall. Do not turn the task into a calculation of an annual mean or claim values for months not supplied. Check that your description says what changed and when, rather than repeating the data as an unconnected list. If the graph choice was correct but the evidence was thin, choose practice that asks you to interpret a plotted trend. If the choice itself was the problem, compare line and bar graph uses before retrying.

Worked example. A table shows the average monthly temperature (degrees C) for an inland town: Jan 3, Apr 10, Jul 19, Oct 11. State the most suitable type of graph to display this data, justify your choice, and describe the pattern that plotting temperature against month would reveal.

  1. 1 mark: line graph identified
  2. 1 mark: justification, e.g. temperature changes continuously through the months so a line graph shows the trend clearly
  3. 1 mark: description of pattern, e.g. temperature rises from a low in winter to a peak in summer then falls again
  4. 1 mark: reference to specific data given, e.g. rising from 3 degrees C in January to 19 degrees C in July before falling to 11 degrees C by October. Final answer: a line graph, showing temperature rising from a winter low of 3 degrees C to a summer peak of 19 degrees C before falling again.

Answer: a line graph, showing temperature rising from a winter low of 3 degrees C to a summer peak of 19 degrees C before falling again.

Choose sampling practice by its planning challenge

Choose the GEO.SK6 fieldwork planning guide and fieldwork pack when you need to justify how a sample represents places or groups. This 4-mark task exposes treating a sample of 60 as automatically representative, or giving an advantage without a limitation. Address why all four streets should be represented and consider a practical limitation of stratifying; use only the information in the question.

The four streets contain equal numbers of households, so a proportional division of 60 residents gives 15 places per street. That is a way to reason from the information in this question, not a claim about a required fieldwork procedure. Stratification makes it possible to compare streets and prevents one street from making up the whole sample. It does not by itself guarantee that the residents chosen within each street are unbiased; the scheme also accepts the extra planning needed to identify and allocate the groups. Mark the justification and limitation as separate jobs. If you describe representation but omit a limitation, practise evaluating a sampling choice. If you list a limitation without relating the method to all four streets, revisit how the sample is divided before trying another fieldwork question. A stratified sample divides a population into relevant groups before selecting participants. In this scenario, the four streets are the groups named by the question; equal household numbers mean an equal allocation would be 15 of the 60 residents from each street. The purpose of this reasoning is to include each street so their views can be compared. It does not tell you what residents actually think, because no survey results are given. Nor does the group division settle how individuals are selected: the mark scheme notes that convenience choices within a street can still bias responses. Keep these separate in your answer: representation is the reason for the method, and selection bias or extra planning can be its limitation. If those points blur together, practise explaining a method and then evaluating one weakness.

Worked example. A geography class plans to survey 60 residents about a proposed cycle scheme, from a residential area with an equal number of households on 4 separate streets. Justify the use of stratified sampling for this survey, and explain one limitation of this approach.

  1. 1 mark: justification - stratified sampling ensures each of the 4 streets is represented in the sample, so views can be compared across all streets
  2. 1 mark: justification - allocating the sample proportionally means results better reflect true opinion across the whole area, rather than one street dominating
  3. 1 mark: limitation - even within a stratified sample, individuals on each street are often still chosen non-randomly (e.g. by convenience), so some bias may remain
  4. 1 mark: limitation - correctly identifying and allocating the strata takes more planning and time before sampling can even begin. Final answer: stratified sampling ensures all 4 streets are fairly represented, allowing comparison across the area, but choosing individuals within each stratum can still introduce bias, and identifying the strata correctly takes extra planning time.

Answer: stratified sampling ensures all 4 streets are fairly represented, allowing comparison across the area, but choosing individuals within each stratum can still introduce bias, and identifying the strata correctly takes extra planning time.

Keep going

Build these into a personalised pack.