Workbooks like this one, with 8 topics, 76 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.
Pages
30 A4 pages
Topics
8 topics
Questions
76 · 144 exam marks
Answers
From page 21
Covers
Mechanics
What is inside
8 topics · answers from p21
Each topic starts with a short method recap and a worked example, followed by practice questions and exam-style questions. All the answers and mark schemes are at the back, by topic, so the book works for homework, timed practice or revision.
AnswersAnswers and mark schemes for every topicp21
Explore this volume
A Level Maths Mechanics Essentials includes Mechanics: Quantities, Units and Kinematics (Mechanics); Mechanics: Forces and Newton's Laws (Mechanics); Mechanics: Moments (Mechanics); Mechanics: Projectiles and Further Kinematics (Mechanics); Mechanics: Kinematics Depth (Mechanics); Mechanics: Forces and Newton's Laws Depth (Mechanics); Mechanics: Moments and Statics Depth (Mechanics); Mechanics: Projectiles and Applications Depth (Mechanics).
Method recap - Mechanics: Moments and Statics Depth
Draw a clear diagram showing every force acting on the rigid body (weight at the centre of mass, which may not be the midpoint for a non-uniform body, plus every normal reaction, tension and friction force), labelling all given distances and angles.
Choose the point to take moments about strategically: a point where an unknown force acts (such as a hinge, or the foot of a ladder) makes that force's moment zero, removing it from the equation.
For each force not at the pivot, find its moment as magnitude multiplied by perpendicular distance from the pivot; for a force acting at an angle to the body, use magnitude times distance along the body times the sine of the angle between them.
Set the sum of clockwise moments equal to the sum of anticlockwise moments (equivalently, resultant moment = 0) for a body in equilibrium.
Worked example - Mechanics: Moments and Statics Depth
A uniform ladder AB has length 5 m and weight 200 N. The ladder rests with end A on rough horizontal ground and end B against a smooth vertical wall, at 60 degrees to the horizontal. The coefficient of friction between the ladder and the ground is 0.4. A person of weight 700 N stands on the ladder at point P. Take g = 9.8 m/s^2. Given that the ladder is on the point of slipping, find the distance AP.
Draw a diagram: the ladder's weight (200 N) acts at its midpoint, 2.5 m from A; the person's weight (700 N) acts at P, distance d from A (to be found); normal reaction R and friction Fr act at A (ground); normal reaction S acts at B (wall, smooth, so horizontal only).
Resolve vertically: since the wall is smooth (no vertical force at B), R = 200 + 700 = 900 N.
Since the ladder is on the point of slipping, friction is limiting: Fr = mu R = 0.4 x 900 = 360 N. Resolve horizontally: S = Fr = 360 N.
Take moments about A (this eliminates both R and Fr, since both act at A): the clockwise moments from the two weights total 200(2.5cos60) + 700d(cos60); the anticlockwise moment from S is 360(5sin60).
Set clockwise equal to anticlockwise: 200(2.5)(0.5) + 700d(0.5) = 360(5)(0.8660254), giving 250 + 350d = 1558.85 (2 d.p.).
Solve for d: 350d = 1308.85, so d = 3.74 m (3 s.f.). The person can climb 3.74 m up the ladder before it is on the point of slipping.
Question 9 - Mechanics: Moments and Statics Depth
7 marks
A uniform ladder AB has length 6 m and weight 240 N. The ladder rests with end A on rough horizontal ground and end B against a smooth vertical wall, inclined at 65 degrees to the horizontal. A decorator of weight 560 N stands on the ladder at the point C, where BC = 1.5 m. Take g = 9.8 m/s^2. Given that the ladder is on the point of slipping, find the coefficient of friction between the ladder and the ground, giving your answer to 3 significant figures.
Answer and mark scheme
Mark scheme for Question 9 [7 marks]
Question 9[7 marks]
Answer or working
Marks
resolves vertically (wall smooth): R = 240 + 560 = 800 N
1
identifies AC = 6 - 1.5 = 4.5 m, the decorator's distance from A
1
takes moments about A: S(6sin65) = 240(3cos65) + 560(4.5cos65)
1
simplifies the right-hand side coefficient: 240(3) + 560(4.5) = 720 + 2520 = 3240
1
finds S = 3240cos65/(6sin65) = 252 N (3 s.f.)
1
uses S = Fr = μ R (limiting friction, since the ladder is on the point of slipping)uses S = Fr = mu R (limiting friction, since the ladder is on the point of slipping)
1
final answer μ = 252/800 = 0.315 (3 s.f.)final answer mu = 252/800 = 0.315 (3 s.f.)
1
Question 10 - Mechanics: Moments and Statics Depth
7 marks
A uniform cube of side 0.6 m and mass 20 kg rests on rough horizontal ground. The coefficient of friction between the cube and the ground is 0.8. A horizontal force P is applied to a vertical face of the cube, at a height h metres above the ground, and is gradually increased until the cube either slides or topples (about the bottom edge furthest from where P is applied), whichever happens first. Take g = 9.8 m/s^2. (a) Find the value of P at which the cube would be on the point of sliding. (2) (b) Find, in terms of h, the value of P at which the cube would be on the point of toppling. (3) (c) Hence find the value of h above which the cube topples before it slides. (2)
Answer and mark scheme
Mark scheme for Question 10 [7 marks]
Question 10[7 marks]
Answer or working
Marks
1 mark (a): uses P = μ R with R = mg = 20(9.8) = 196 N1 mark (a): uses P = mu R with R = mg = 20(9.8) = 196 N
1
1 mark (a): final answer P = 0.8(196) = 156.8 N
1
1 mark (b): recognises that at the point of toppling, the normal reaction acts entirely at the tipping edge, so moments should be taken there
1
1 mark (b): forms the moments equation P x h = mg x (side/2) = 196 x 0.31 mark (b): forms the moments equation P x h = mg x (side/2) = 196 x 0.3
1
1 mark (b): final answer P = 58.8/h (N, with h in metres)
1
1 mark (c): sets the toppling value of P less than the sliding value: 58.8/h < 156.8
1
1 mark (c): cso: simplifies to h > 0.375, so the cube topples before it slides when h > 0.375 m
1
Method recap - Mechanics: Projectiles and Applications Depth
Resolve the initial velocity into horizontal (U cos(theta), constant throughout, since there is no horizontal force) and vertical (U sin(theta), changing under gravity) components before doing anything else.
Treat horizontal and vertical motion as two independent suvat problems, linked only by the shared value of time t.
If launch and landing heights are equal, use the vertical suvat with total vertical displacement 0 (or the standard result T = 2U sin(theta)/g for the time of flight); if the heights differ, use the actual (positive or negative) vertical displacement in s = ut + 0.5at^2 and solve the resulting quadratic in t, discarding any negative root.
To find the range, substitute the time of flight into the horizontal equation (range = horizontal speed x time); to find the greatest height, use v^2 = u^2 + 2as in the vertical direction only, with v = 0.
Question 10 - Mechanics: Projectiles and Applications Depth
7 marks
A particle is projected from the top of a slope, O, with speed 14 m/s at 40 degrees above the horizontal. The slope falls away from O at a constant angle of 15 degrees below the horizontal. The particle moves freely under gravity and lands on the slope at the point Q. Take g = 9.8 m/s^2. Using x for the horizontal distance from O to the landing point, (a) find the value of x by setting the trajectory equation equal to the equation of the slope. (5) (b) Hence find the distance OQ, giving your answer to 3 significant figures. (2)
Answer and mark scheme
Mark scheme for Question 10 [7 marks]
Question 10[7 marks]
Answer or working
Marks
1 mark (a): writes the trajectory equation y = x tan40 - [g x2 (1 + tan2 40)]/(2 x 142), taking y upward as positive1 mark (a): writes the trajectory equation y = x tan40 - [g x^2 (1 + tan^2 40)]/(2 x 14^2), taking y upward as positive
1
1 mark (a): writes the slope's equation as y = -x tan15 (y is negative for positive x, since the slope falls away from O)
1
1 mark (a): sets the two expressions equal and divides every term by x (x = 0, the point O itself, is rejected), leaving a linear equation in x
1
1 mark (a): rearranges to make x the subject: x = [142(tan40 + tan15)]/[g(1 + tan2 40)/2] in any correct equivalent form1 mark (a): rearranges to make x the subject: x = [14^2(tan40 + tan15)]/[g(1 + tan^2 40)/2] in any correct equivalent form
1
1 mark (a): final answer x = 26.0 m (3 s.f.)
1
1 mark (b): recognises that the distance along the slope satisfies OQ x cos15 = x (the horizontal distance), so OQ = x/cos15
1
1 mark (b): final answer OQ = 26.9 m (3 s.f.)
1
Question 8 - Mechanics: Projectiles and Applications Depth
7 marks
A particle is projected from a point O on horizontal ground with speed 20 m/s, at an angle theta above the horizontal (0 < theta < 90). The particle passes through the point which is 8 m horizontally and 3 m vertically from O. Take g = 9.8 m/s^2. Using the trajectory equation y = x tan(theta) - [g x^2 (1 + tan^2(theta))]/(2U^2), show that 98 tan^2(theta) - 1000 tan(theta) + 473 = 0, and hence find the two possible values of theta, giving your answers to 1 decimal place.
Answer and mark scheme
Mark scheme for Question 8 [7 marks]
Question 8[7 marks]
Answer or working
Marks
substitutes x = 8, y = 3, U = 20 into the trajectory equation: 3 = 8tan(θ) - [9.8(64)(1 + tan2(θ))]/800substitutes x = 8, y = 3, U = 20 into the trajectory equation: 3 = 8tan(theta) - [9.8(64)(1 + tan^2(theta))]/800
rearranges into the form 0.784 tan2(θ) - 8tan(θ) + 3.784 = 0rearranges into the form 0.784 tan^2(theta) - 8tan(theta) + 3.784 = 0
1
cso: multiplies through by 125 to reach 98 tan2(θ) - 1000 tan(θ) + 473 = 0, as requiredcso: multiplies through by 125 to reach 98 tan^2(theta) - 1000 tan(theta) + 473 = 0, as required
evaluates the discriminant and both roots: tan(θ) = 9.707 or tan(θ) = 0.4972 (4 s.f.)evaluates the discriminant and both roots: tan(theta) = 9.707 or tan(theta) = 0.4972 (4 s.f.)
1
final answer: θ = 84.1 degrees or θ = 26.4 degrees (1 d.p.)final answer: theta = 84.1 degrees or theta = 26.4 degrees (1 d.p.)