Revision Library
Choose a subject
Menu
Science
Need a new topic?
Missing a topic, found a bug, or want something added?

KS3 Science Year 7 Topic Workbooks

KS3 Science Year 7 Topic Workbook

Cells and Organisation, Particles and their Behaviour, Acids and Alkalis and 2 more

Level
KS3
Series
KS3 Science Year 7 Topic Workbooks
Suitable for
Years 7-9, ages 11-14
FreePDF download · 2027 edition · 61 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 5 topics, 69 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
61 A4 pages
Chapters
5 worksheet chapters
Questions
69 · 296 marks
Answers
From page 46
Working time
About 5h 5m

What is inside

5 chapters · answers from p46

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 5 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Cells and Organisation15 questions · 56 marks · about 55 min Topic guide: Cells and Organisationp3
  2. 02Particles and their Behaviour16 questions · 65 marks · about 65 min Topic guide: Particles and their Behaviourp10
  3. 03Acids and Alkalis15 questions · 58 marks · about 60 min Topic guide: Acids and Alkalisp21
  4. 04Separating Mixtures and Solutions8 questions · 46 marks · about 55 min Topic guide: Separating Mixtures and Solutionsp29
  5. 05Space Physics15 questions · 71 marks · about 70 min Topic guide: Space Physicsp34
  6. AnswersMark schemes for every chapterp46

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every KS3 Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

KS3 Science Year 7 Topic Workbook includes Cells and Organisation (from page 3); Particles and their Behaviour (from page 10); Acids and Alkalis (from page 21); Separating Mixtures and Solutions (from page 29); Space Physics (from page 34).

Worked question 2 - Separating Mixtures and Solutions

Open the included worksheet

A student is given a mixture composed of 10 g of sugar, 10 g of sand and 20 g of an oily liquid that does not mix with water. The student plans to separate and weigh each component. The student follows these steps and records the mass obtained for each component at the end: 1) Add 50 g of water, stir and allow to settle. 2) Use a separating funnel and drain the lower aqueous layer into a beaker, leaving the oily layer in the funnel. 3) Filter the aqueous layer to remove any sand and then evaporate the water to obtain sugar crystals. The student reports the following masses after drying: oily liquid 19.0 g, sand 9.2 g, sugar 9.0 g. Use the data to answer the parts.
(a)Calculate the total mass recovered by the student and compare it to the original total mass of the mixture. Show your working and state the difference in grams.(4)
(b)Suggest six plausible reasons, related to technique or apparatus, that could explain the loss of 2.8 g during the separation and collection. Give brief explanations for each reason.(6)
(c)The teacher suggests an improved method to reduce loss: rinse the separating funnel and filter paper with small amounts of solvent or water and include the rinsings with the correct fraction, and dry samples thoroughly before weighing. Explain how rinsing and careful drying would reduce the mass loss or measurement error. Give two separate points.(6)

Answer and mark scheme

Question 2

CreditAnswer or working
M1(a) correct addition of recovered masses 19.0 + 9.2 + 9.0 = 37.2 g
M1(a) correct statement of original total mass 10 + 10 + 20 = 40 g
A1(a) calculate difference 40 - 37.2 = 2.8 g cao
A1(a) state that recovered mass is 37.2 g which is 2.8 g less than original
M1(b) loss could be due to incomplete transfer of oily liquid from separating funnel (eg some left on walls), with brief explanation
M1(b) loss of sugar during filtration or crystallisation (eg some sugar remained dissolved in water or stuck to filter paper), with brief explanation
M1(b) sand lost during transfers or stuck to glassware, with brief explanation
M1(b) evaporation losses when drying crystals (splashing or carry-over) or incomplete drying leading to underestimation, with brief explanation
M1(b) weighing error such as balance not tared or sample not cooled before weighing, with brief explanation
M1(b) contamination or mixture of layers causing some mass to be unassigned, with brief explanation
M1(c) rinsing recovers material stuck to glassware or filter paper and returns it to the correct fraction
A1(c) explain that rinsing increases recovered mass because residues are washed into the correct container instead of being left behind
M1(c) careful drying ensures that water or solvent is removed before weighing
A1(c) explain that drying avoids measuring extra mass from solvent or underestimating mass when wet, improving accuracy
M1(c) mention practical step such as using a warm oven or desiccator or leaving to dry to constant mass
A1(c) link to how this reduces random or systematic error in the final mass measurement
  • (a) Answer: Total recovered 37.2 g; original mass 40 g; difference 2.8 g (less recovered).
  • (b) Answer: Possible causes: oily liquid left on funnel walls; some sugar remained dissolved or stuck to filter paper; sand lost during transfers; evaporation losses or incomplete drying; balance or weighing procedure errors; or contamination between layers.
  • (c) Answer: Rinsing washes residues from the funnel and filter paper into the correct collection vessel so less sample is left behind, increasing recovered mass. Careful drying removes water or solvent so the measured mass is of the substance only; drying to constant mass avoids systematic under- or overestimation.

Question 7 - Separating Mixtures and Solutions

Open the included worksheet

A chromatography experiment uses a strip of paper. The start line is drawn at 2.0 cm from the bottom. The solvent front moves to 12.0 cm from the bottom. A blue spot originally at 2.0 cm travels to 7.0 cm.
(a)Calculate the Rf value of the blue dye. Rf = distance moved by dye / distance moved by solvent front.(2)
(b)Suggest one practical reason why using the same solvent and same paper is important when comparing Rf values between different students.(3)

Answer and mark scheme

Question 7

CreditAnswer or working
M1(a) correct distances: dye moved = 7.0 - 2.0 = 5.0 cm and solvent moved = 12.0 - 2.0 = 10.0 cm
A1(a) Rf = 5.0 / 10.0 = 0.50 cao
M1(b) state that different solvents or paper can change how far dyes travel
M1(b) link to comparing results eg so Rf values are comparable between students
A1(b) give a practical example such as solvent strength or absorbency affecting distance travelled cao
  • (a) Answer: 0.50
  • (b) Answer: Different solvents or paper change how far dyes travel, so using the same solvent and paper makes Rf values comparable; for example a stronger solvent would carry dyes further.

Question 1 - Separating Mixtures and Solutions

Open the included worksheet

An experiment compares the solubility of potassium nitrate at two temperatures. A student dissolves 30 g of potassium nitrate in 100 g of water at 25°C and finds it all dissolves. At 5°C the student dissolves 30 g in 100 g water and 12 g remains undissolved. Use the data to answer the parts.
(a)Calculate the solubility of potassium nitrate at 5°C in g per 100 g water.(2)
(b)Give one conclusion about how temperature affects the solubility of potassium nitrate, using the data.(2)
(c)Name one experimental improvement the student could make to reduce random error when measuring how much solid dissolves.(2)

Answer and mark scheme

Question 1

CreditAnswer or working
M1(a) calculate dissolved amount 30 - 12 = 18 g
A1(a) 18 g per 100 g water cao
M1(b) state that solubility increases with temperature or solubility at 25°C is greater than at 5°C
A1(b) use data to support statement eg 30 g dissolves at 25°C but only 18 g dissolves at 5°C cao
M1(c) suggestion such as repeat the experiment and take an average, use more accurate balance, ensure constant temperature with a water bath, or use same stirring time
A1(c) brief explanation of how this reduces error eg repeats reduce random variation or water bath keeps temperature constant
  • (a) Answer: 18 g per 100 g water
  • (b) Answer: Solubility increases as temperature increases; 30 g dissolves at 25°C but only 18 g dissolves at 5°C.
  • (c) Answer: Repeat the experiment and take the average, or use a water bath to keep temperature constant to reduce random error.

Question 4 - Space Physics

Open the included worksheet

A student models the Earth's day-night cycle using a lamp (representing the Sun) and a globe on a spindle (representing the Earth), in a darkened room.
Darkened room Lamp Globe on spindle Lit side Shadow side
(a)Identify which part of the model represents the Sun, and which part represents the Earth.(1)
(b)The student spins the globe on its spindle while the lamp stays still. Explain how this models day and night on Earth.(2)
(c)Suggest one way this model does not accurately represent the real Earth-Sun system.(1)

Answer and mark scheme

Question 4

CreditAnswer or working
B1(a) lamp = Sun, globe = Earth (both needed)
B1(b) as the globe spins, the side facing the lamp is lit up, representing day (oe)
B1(b) the side facing away from the lamp is in shadow, representing night, and this repeats as the globe keeps turning (oe, ft from part a)
B1(c) any valid limitation, e.g. the model does not show the Earth's axial tilt, or the sizes and distances of the lamp and globe are not to the same scale as the Sun and Earth, or the globe does not also orbit the lamp (any one, oe)
  • (a) Answer: Lamp = Sun. Globe = Earth.
  • (b) Answer: As the globe spins, the side facing the lamp is lit (day) and the side facing away is in shadow (night), repeating as the globe keeps turning.
  • (c) Answer: The model does not show the Earth's axial tilt (or the sizes/distances used are not to scale).

Question 6 - Space Physics

Open the included worksheet

The diagram shows four positions (A, B, C and D) of the Moon as it orbits the Earth, viewed from above. Position A is directly between the Earth and the Sun. Position C is directly on the opposite side of the Earth from the Sun. Positions B and D are each a quarter of the way around the orbit from A.
Sun Earth A C B D The Moon's orbit around the Earth (viewed from above)
(a)Name the phase of the Moon seen from Earth when the Moon is at position A.(1)
(b)Name the phase of the Moon seen from Earth when the Moon is at position C.(1)
(c)Explain why we see different phases of the Moon during a month, even though the Moon itself does not change shape.(2)

Answer and mark scheme

Question 6

CreditAnswer or working
B1(a) new moon
B1(b) full moon
B1(c) the Moon does not produce its own light; it only reflects light from the Sun (oe)
B1(c) as the Moon orbits the Earth, we see different amounts of its sunlit half from Earth, which changes the phase we see (oe)
  • (a) Answer: New moon.
  • (b) Answer: Full moon.
  • (c) Answer: The Moon only reflects sunlight, and as it orbits the Earth we see different amounts of its sunlit half, which changes the phase we see.

More KS3 books

Want a different mix of topics?