Revision Library
Choose a subject
Menu
Computer Science
Need a new topic?
Missing a topic, found a bug, or want something added?

Component 1: Computer Systems GCSE Computer Science Worksheets, Questions and Revision

8 original Component 1: Computer Systems worksheet packs - 79 printable pages with full mark schemes. Systems architecture, memory, storage, networks and system software. View any pack in the browser or open the print-ready PDF.

OCR J277AQAEdexcelWJECEduqasCCEA
packs
8
question pages
54
printable pages
79

Free for personal and classroom use - see copyright & terms.

See the method: Systems Architecture

A CPU has a clock speed of 2.5 GHz. Calculate the number of clock cycles it completes in 4 seconds.

  1. Convert GHz to Hz: 2.5 GHz = 2.5 x 10^9 Hz (cycles per second).
  2. Multiply the number of cycles per second by the time in seconds: 2.5 x 10^9 x 4.
  3. Calculate: 2.5 x 4 = 10, so the result is 10 x 10^9.
  4. Final answer: 1 x 10^10 clock cycles (10,000,000,000).
Every GCSE Computer Science pack

Working on component 1: computer systems

Computer systems questions combine knowledge of hardware with numerical reasoning. This component subset includes processor performance and memory, where writing the conversion explicitly helps distinguish a correct method from a misplaced power of ten. Systems architecture is the study of how a computer's CPU is built and how it carries out program instructions, using the fetch-decode-execute cycle and components such as registers, the ALU and buses. It is assessed in Paper 1 of GCSE Computer Science and covers CPU performance factors and embedded systems. Learn the role of each register inside the CPU: the Program Counter (PC), MAR, MDR, CIR and the Accumulator, plus the ALU and Control Unit.

Walk through the fetch-decode-execute cycle step by step: the address in the PC is copied to the MAR, the instruction is fetched into the MDR and then the CIR, decoded, and executed. Learn the three buses (address, data, control) and what each one carries between the CPU and memory.

Systems Architecture

Systems Architecture method: Learn the factors that affect CPU performance: clock speed, number of cores and cache size, and be able to explain how each one changes processing speed. Compare general purpose computers with embedded systems, and be able to give real world examples of embedded systems.

Practise calculation questions such as converting clock speed units and working out the number of clock cycles completed per second.

Worked example. A CPU has a clock speed of 2.5 GHz. Calculate the number of clock cycles it completes in 4 seconds.

  1. Convert GHz to Hz: 2.5 GHz = 2.5 x 10^9 Hz (cycles per second).
  2. Multiply the number of cycles per second by the time in seconds: 2.5 x 10^9 x 4.
  3. Calculate: 2.5 x 4 = 10, so the result is 10 x 10^9.
  4. Final answer: 1 x 10^10 clock cycles (10,000,000,000).

Answer: Final answer: 1 x 10^10 clock cycles (10,000,000,000).

Memory and Primary Storage

Memory and Primary Storage method: Learn the difference between primary storage, which the CPU accesses directly, and secondary storage, used for permanent files. Compare RAM and ROM: which is volatile, what each stores, and why a computer needs both.

Learn the memory hierarchy from fastest and smallest to slowest and largest: registers, cache, RAM, secondary storage. Explain what cache memory does and how a higher cache hit rate improves CPU performance.

Worked example. A laptop has 4 GB of RAM installed. Calculate the maximum number of 8 MB photo files that could be held in RAM at one time, if no other data were stored in RAM. Use 1 GB = 1000 MB.

  1. Convert 4 GB to MB: 4 x 1000 = 4000 MB.
  2. Divide the total RAM by the size of one file: 4000 / 8.
  3. Calculate: 4000 / 8 = 500.
  4. Final answer: 500 photo files.

Answer: Final answer: 500 photo files.

Keep going

Build these into a personalised pack.