Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Timber and manufactured boards

Timber selection considers grain, moisture and defects. Manufactured boards offer different structures and edge qualities, so a choice needs evidence about the intended product.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Read the loading direction and check how the grain runs.
  2. Check moisture conditions before final sizing because drying can change dimensions.
  3. Identify manufactured boards by their structure, such as crossed veneers or resin-bonded fibres.
  4. Compare load, finish and cost requirements before accepting a board.

Worked example

An indoor display needs a painted, routed edge without visible layers. How would you compare plywood and MDF?

  1. Plywood has bonded veneers, with adjacent grain directions crossing; layers can remain visible at an edge.
  2. MDF consists of fine fibres bonded with resin, giving a more uniform routed edge after suitable preparation.
  3. If both samples satisfy the load and cost limits, the prepared edge favours MDF for this brief.

Practice questions

Q1What are plywood layers called?Show answer

Answer: Veneers.

Got it right?
Q2How is the grain arranged in adjacent plywood layers?Show answer

Answer: It runs in crossing directions, commonly at right angles.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3What forms the body of MDF?Show answer

Answer: Fine wood fibres bonded with resin and pressed into a sheet.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4Does the word hardwood guarantee greater measured hardness than every softwood?Show answer

Answer: No. Hardwood and softwood describe tree classifications, so hardness must be checked using material evidence.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why a large knot can matter when selecting a loaded timber handle.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why timber should reach the required moisture condition before final sizing.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Timber and manufactured boards worksheet pack - 4 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 2 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 2 of GCSE Design and Technology Topic Workbook 1 and chapter 2 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Timber and manufactured boards, or which topic to write up next.

Build a full practice pack.