Revision Library
Choose a subject
Menu

GCSE Chemistry 10-Minute Tests

Atomic Structure and the Periodic Table, Atomic Structure and the History of the Atom, The Periodic Table: Groups and Trends and 26 more

Level
GCSE · Edexcel 1CH0 · AQA 8462 · OCR J248
Series
GCSE Chemistry 10-Minute Tests
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 116 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 29 topics, 97 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
116 A4 pages
Chapters
29 worksheet chapters
Questions
97
Answers
From page 88
Working time
About 4h 50m

What is inside

29 chapters · answers from p88

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 29 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Atomic Structure and the Periodic Table4 questions · about 10 min Topic guide: Atomic Structure and the Periodic Tablep3
  2. 02Atomic Structure and the History of the Atom3 questions · about 10 min Topic guide: Atomic Structure and the History of the Atomp6
  3. 03The Periodic Table: Groups and Trends3 questions · about 10 min Topic guide: The Periodic Table: Groups and Trendsp9
  4. 04Bonding, Structure and Properties of Matter4 questions · about 10 min Topic guide: Bonding, Structure and Properties of Matterp12
  5. 05Chemical Bonding: Ionic, Covalent and Metallic2 questions · about 10 min Topic guide: Chemical Bonding: Ionic, Covalent and Metallicp15
  6. 06Structures, Properties and Nanoparticles3 questions · about 10 min Topic guide: Structures, Properties and Nanoparticlesp18
  7. 07Quantitative Chemistry3 questions · about 10 min Topic guide: Quantitative Chemistryp21
  8. 08Moles, Formulae and Equations4 questions · about 10 min Topic guide: Moles, Formulae and Equationsp23
  9. 09Concentration, Yield and Atom Economy3 questions · about 10 min Topic guide: Concentration, Yield and Atom Economyp26
  10. 10Chemical Changes3 questions · about 10 min Topic guide: Chemical Changesp28
  11. 11Reactivity, Acids and Salts2 questions · about 10 min Topic guide: Reactivity, Acids and Saltsp31
  12. 12Electrolysis3 questions · about 10 min Topic guide: Electrolysisp34
  13. 13Energy Changes5 questions · about 10 min Topic guide: Energy Changesp37
  14. 14Exothermic and Endothermic Reactions4 questions · about 10 min Topic guide: Exothermic and Endothermic Reactionsp40
  15. 15Bond Energies, Cells and Fuel Cells3 questions · about 10 min Topic guide: Bond Energies, Cells and Fuel Cellsp43
  16. 16Rate and Extent of Chemical Change3 questions · about 10 min Topic guide: Rate and Extent of Chemical Changep46
  17. 17Rates of Reaction3 questions · about 10 min Topic guide: Rates of Reactionp49
  18. 18Reversible Reactions and Equilibrium3 questions · about 10 min Topic guide: Reversible Reactions and Equilibriump52
  19. 19Organic Chemistry4 questions · about 10 min Topic guide: Organic Chemistryp55
  20. 20Alkanes, Alkenes and Crude Oil4 questions · about 10 min Topic guide: Alkanes, Alkenes and Crude Oilp58
  21. 21Alcohols, Carboxylic Acids and Polymers1 questions · about 10 min Topic guide: Alcohols, Carboxylic Acids and Polymersp61
  22. 22Chemical Analysis5 questions · about 10 min Topic guide: Chemical Analysisp63
  23. 23Tests for Ions, Gases and Flame Tests3 questions · about 10 min Topic guide: Tests for Ions, Gases and Flame Testsp66
  24. 24Chromatography and Instrumental Analysis3 questions · about 10 min Topic guide: Chromatography and Instrumental Analysisp69
  25. 25Chemistry of the Atmosphere5 questions · about 10 min Topic guide: Chemistry of the Atmospherep72
  26. 26The Atmosphere: Evolution and Greenhouse Gases4 questions · about 10 min Topic guide: The Atmosphere: Evolution and Greenhouse Gasesp75
  27. 27Climate Change and Atmospheric Pollutants3 questions · about 10 min Topic guide: Climate Change and Atmospheric Pollutantsp78
  28. 28Using Resources4 questions · about 10 min Topic guide: Using Resourcesp81
  29. 29Using the Earth's Resources and Potable Water3 questions · about 10 min Topic guide: Using the Earth's Resources and Potable Waterp84
  30. AnswersMark schemes for every chapterp88

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Chemistry 10-Minute Tests includes Atomic Structure and the Periodic Table (from page 3); Atomic Structure and the History of the Atom (from page 6); The Periodic Table: Groups and Trends (from page 9); Bonding, Structure and Properties of Matter (from page 12); Chemical Bonding: Ionic, Covalent and Metallic (from page 15); Structures, Properties and Nanoparticles (from page 18); Quantitative Chemistry (from page 21); Moles, Formulae and Equations (from page 23); Concentration, Yield and Atom Economy (from page 26); Chemical Changes (from page 28); Reactivity, Acids and Salts (from page 31); Electrolysis (from page 34); Energy Changes (from page 37); Exothermic and Endothermic Reactions (from page 40); Bond Energies, Cells and Fuel Cells (from page 43); Rate and Extent of Chemical Change (from page 46); Rates of Reaction (from page 49); Reversible Reactions and Equilibrium (from page 52); Organic Chemistry (from page 55); Alkanes, Alkenes and Crude Oil (from page 58); Alcohols, Carboxylic Acids and Polymers (from page 61); Chemical Analysis (from page 63); Tests for Ions, Gases and Flame Tests (from page 66); Chromatography and Instrumental Analysis (from page 69); Chemistry of the Atmosphere (from page 72); The Atmosphere: Evolution and Greenhouse Gases (from page 75); Climate Change and Atmospheric Pollutants (from page 78); Using Resources (from page 81); Using the Earth's Resources and Potable Water (from page 84).

Worked question 3 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

A student makes a simple cell by connecting a magnesium electrode and a copper electrode, each dipped in electrolyte solution and joined by a wire and voltmeter. Magnesium is a much more reactive metal than copper.
(a)State which electrode is the negative electrode and give a brief explanation.(1)
(b)The student then makes a magnesium-iron cell (iron is less reactive than magnesium, but more reactive than copper). State, with a reason, which of the two cells (magnesium-copper or magnesium-iron) would produce the larger potential difference.(3)

Answer and mark scheme

Question 3

CreditAnswer or working
B1(a) magnesium electrode is the negative electrode because magnesium is the more reactive metal and loses electrons more readily (is oxidised)
M1(b) identifies the magnesium-copper cell as producing the larger potential difference cao
M1(b) states that the size of the potential difference produced by a simple cell depends on the difference in reactivity between the two metals used
A1(b) explains that magnesium and copper are further apart in reactivity than magnesium and iron, so the magnesium-copper cell has the bigger reactivity difference and produces the bigger potential difference, oe
  • (a) Answer: Magnesium electrode is the negative electrode because magnesium is more reactive than copper and loses electrons more readily.
  • (b) Answer: The magnesium-copper cell would produce the larger potential difference, because the size of the potential difference depends on the difference in reactivity between the two metals, and magnesium and copper are further apart in reactivity than magnesium and iron.

Question 2 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

In a required practical to investigate the reactivity series, a student measures the emf of cells made with different metal electrodes in a solution of their own ions. Explain one control variable and one improvement the student could make to reduce random error in emf measurements.
(a)State one control variable and explain why it should be controlled.(1)
(b)Give one improvement to reduce random error and explain how it helps.(1)

Answer and mark scheme

Question 2

CreditAnswer or working
B1(a) control variable: concentration of the metal ion solutions and explanation that emf depends on concentration so must be kept constant
B1(b) repeat measurements and take the mean, explanation that this reduces random variation and gives a more reliable emf value
  • (a) Answer: Control variable: concentration of metal ion solutions, because emf depends on ion concentration and must be constant to compare cells.
  • (b) Answer: Repeat each emf measurement several times and use the mean, which reduces random variation and gives a more reliable value.

Question 1 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

A molecule of hydrogen chloride, HCl, has an H-Cl bond enthalpy of 431 kJ per mole. Calculate the energy needed to break all the H-Cl bonds in 0.250 mol of HCl gas.
(a)Calculate the energy needed to break all H-Cl bonds in 0.250 mol HCl gas.(2)

Answer and mark scheme

Question 1

CreditAnswer or working
M1(a) substitutes: energy = 431 kJ mol-1 x 0.250 mol
A1(a) 107.75 kJ (allow 108.0 kJ) cao
  • (a) Answer: 108 kJ

Question 1 - Quantitative Chemistry

Open the included worksheet

State the meaning of 'concentration' of a solution in terms of amount of substance.

Answer and mark scheme

Question 1

CreditAnswer or working
B1amount of solute (in moles) dissolved per unit volume of solution, usually mol per dm3, oe
B1can be described as moles of solute per dm3 of solution, oe
  • Answer: Amount of solute (in moles) dissolved per unit volume of solution, mol per dm3.

Question 2 - Quantitative Chemistry

Open the included worksheet

A student has a 0.10 mol per dm3 solution of sodium hydroxide, NaOH. How many moles of NaOH are in 100 cm³ of this solution?

Answer and mark scheme

Question 2

CreditAnswer or working
M1convert volume: 100 cm³ = 0.100 dm3 then moles = concentration x volume = 0.10 x 0.100
A10.010 mol cao
  • Answer: 0.010 mol

Question 1 - Alkanes, Alkenes and Crude Oil

Open the included worksheet

Crude oil is a mixture of hydrocarbons found trapped in porous rocks. It is a finite resource.
(a)Define the term 'hydrocarbon'.(1)
(b)State what is meant by describing crude oil as a 'finite resource'.(1)

Answer and mark scheme

Question 1

CreditAnswer or working
B1(a) a compound (molecule) containing only carbon and hydrogen atoms, oe
B1(b) a resource that is being used up faster than it can be formed/replaced, so it will eventually run out, oe
  • (a) Answer: A compound containing only carbon and hydrogen atoms.
  • (b) Answer: A resource that is being used up faster than it forms, so it will eventually run out.

Question 3 - Alkanes, Alkenes and Crude Oil

Open the included worksheet

Properties of hydrocarbons depend on chain length.
(a)State one physical property that changes when hydrocarbon chain length increases in the fractionation of crude oil.(1)
(b)State another property that changes as chain length increases.(1)

Answer and mark scheme

Question 3

CreditAnswer or working
B1(a) boiling point increases cao
B1(b) viscosity increases or volatility decreases or flammability decreases, oe
  • (a) Answer: Boiling point increases
  • (b) Answer: Viscosity increases

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.