Revision Library
Choose a subject
Menu

GCSE Chemistry Topic Workbooks · Book 1 of 4

GCSE Chemistry Topic Workbook 1

Atomic Structure and the Periodic Table, Atomic Structure and the History of the Atom, The Periodic Table: Groups and Trends and 5 more

Level
GCSE · Edexcel 1CH0 · AQA 8462 · OCR J248
Series
GCSE Chemistry Topic Workbooks, book 1 of 4
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 107 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 8 topics, 118 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
107 A4 pages
Chapters
8 worksheet chapters
Questions
118 · 541 marks
Answers
From page 84
Working time
About 9h 15m

What is inside

8 chapters · answers from p84

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 8 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Atomic Structure and the Periodic Table12 questions · 48 marks · about 50 min Topic guide: Atomic Structure and the Periodic Tablep3
  2. 02Atomic Structure and the History of the Atom14 questions · 64 marks · about 65 min Topic guide: Atomic Structure and the History of the Atomp9
  3. 03The Periodic Table: Groups and Trends17 questions · 69 marks · about 70 min Topic guide: The Periodic Table: Groups and Trendsp18
  4. 04Bonding, Structure and Properties of Matter17 questions · 91 marks · about 95 min Topic guide: Bonding, Structure and Properties of Matterp29
  5. 05Chemical Bonding: Ionic, Covalent and Metallic17 questions · 72 marks · about 75 min Topic guide: Chemical Bonding: Ionic, Covalent and Metallicp44
  6. 06Structures, Properties and Nanoparticles14 questions · 74 marks · about 75 min Topic guide: Structures, Properties and Nanoparticlesp55
  7. 07Quantitative Chemistry11 questions · 64 marks · about 65 min Topic guide: Quantitative Chemistryp66
  8. 08Moles, Formulae and Equations16 questions · 59 marks · about 60 min Topic guide: Moles, Formulae and Equationsp74
  9. AnswersMark schemes for every chapterp84

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Chemistry Topic Workbook 1 includes Atomic Structure and the Periodic Table (from page 3); Atomic Structure and the History of the Atom (from page 9); The Periodic Table: Groups and Trends (from page 18); Bonding, Structure and Properties of Matter (from page 29); Chemical Bonding: Ionic, Covalent and Metallic (from page 44); Structures, Properties and Nanoparticles (from page 55); Quantitative Chemistry (from page 66); Moles, Formulae and Equations (from page 74).

Worked question 5 - Moles, Formulae and Equations

Open the included worksheet

Subtract the crucible and lid mass (24.86 - 24.62 = 0.24 g magnesium; 25.02 - 24.62 = 0.40 g product) to find the oxygen mass by difference: 0.40 - 0.24 = 0.16 g. Convert each element's mass to moles using the given values, 24 for magnesium and 16 for oxygen: 0.24 / 24 = 0.01 mol Mg and 0.16 / 16 = 0.01 mol O. The equal mole amounts give a 1:1 ratio, so the empirical formula is MgO. This is a mole ratio, not a mass ratio: the element masses are 0.24:0.16, or 3:2.

Counting the Uncountable: Atoms, Formulae and the Mole

Original text written for Revision Library.

At the start of the nineteenth century, the chemist John Dalton proposed that every element is made of identical atoms, and that these atoms combine in fixed, whole-number ratios to form compounds. This idea explained something chemists had already noticed: a given compound always contains the same elements in the same proportion by mass, wherever the sample comes from. Dalton went further and assigned each element a relative atomic mass, a number showing how heavy its atoms are compared with one another. A few years later, the Italian scientist Amedeo Avogadro suggested that equal volumes of gases, at the same temperature and pressure, contain equal numbers of particles. His name was later given to a huge number, 6.02 * 10^23, which chemists use to count out a mole of any substance: an amount that always contains this same number of particles, however light or heavy those particles are. Relative formula mass, conservation of mass and the mole are still the basic tools chemists use today, from balancing an equation on paper to working out how many tonnes of limestone a quarry must supply to produce a given mass of quicklime, or how much of each gas is needed to manufacture ammonia in an industrial reactor.

Required practical: determining the empirical formula of magnesium oxide.
A student, Aaliyah, investigates the empirical formula of magnesium oxide. She:
1. Weighs an empty crucible and lid.
2. Adds a coiled piece of magnesium ribbon and weighs the crucible, lid and magnesium.
3. Heats the crucible strongly on a pipe-clay triangle and tripod, lifting the lid slightly at intervals, until the magnesium has completely reacted and the mass is constant.
4. Allows the crucible to cool, then weighs the crucible, lid and solid product.

Her results:
Mass of empty crucible and lid = 24.62 g
Mass of crucible, lid and magnesium = 24.86 g
Mass of crucible, lid and solid product (after heating) = 25.02 g
(a)Calculate the mass of magnesium used in the experiment.(1)
(b)Calculate the mass of oxygen that combined with the magnesium.(1)
(c)Use your answers to (a) and (b) to determine the empirical formula of magnesium oxide. Show your working.(3)
(d)Give one reason why the lid was lifted slightly at intervals during heating.(1)
(e)Explain why the lid was lifted only slightly, rather than removed completely.(1)
(f)Evaluate this method for determining the empirical formula of magnesium oxide. In your answer, refer to possible sources of error, their effect on the calculated formula, and how the method could be improved.(6)

Answer and mark scheme

Question 5

CreditAnswer or working
B1(a) 0.24 g cao (24.86 - 24.62)
B1(b) 0.16 g cao ((25.02 - 24.62) - mass of Mg from (a)); ft from candidate's (a)
M1(c) moles Mg = 0.24 / 24 = 0.01 mol; ft from (a)
M1(c) moles O = 0.16 / 16 = 0.01 mol; ft from (b)
A1(c) MgO cao, from a correctly identified 1:1 ratio
B1(d) to let air/oxygen into the crucible so that all of the magnesium can react (oe)
B1(e) to minimise the amount of white magnesium oxide smoke/powder that escapes; if too much escaped, the measured mass (and calculated formula) would be inaccurate/too low (oe)
5-6(f) L3 A detailed and coherent evaluation is given, covering more than one source of error, each clearly linked to its effect on the calculated formula, together with at least one justified, practical improvement. The answer is well structured, using appropriate scientific terminology throughout.
3-4(f) L2 Some relevant sources of error and/or improvements are described, with a partial explanation of how they would affect the calculated formula. The answer has some structure.
1-2(f) L1 Simple, isolated statement(s) about a source of error or an improvement, with little or no explanation of the effect on the result. The answer may lack a logical structure.
0(f) L0 No relevant content.
  • (a) Answer: 0.24 g
  • (b) Answer: 0.16 g
  • (c) Answer: MgO
  • (d) Answer: Lifting the lid lets air (oxygen) into the crucible so that all of the magnesium can react completely.
  • (e) Answer: Removing the lid completely would let more of the white magnesium oxide smoke escape, lowering the measured mass and making the calculated formula less accurate.
  • (f) Indicative content:
    • Magnesium oxide smoke/powder can escape from the crucible while the lid is lifted, or if it is not well fitted, so the final mass measured is lower than it should be.
    • A lower final mass means the calculated mass of oxygen combined is too low, which could give an inaccurate mole ratio and formula.
    • Magnesium can react with nitrogen in the air, as well as oxygen, forming magnesium nitride; this adds extra mass that is not accounted for by the mass of oxygen alone.
    • If heating stops before all the magnesium has reacted, the final mass will be lower than expected and the calculated ratio of magnesium to oxygen will be inaccurate.
    • The crucible should be heated, cooled, weighed, then reheated and reweighed repeatedly until the mass is constant, to check that the reaction is complete.
    • Weighing the crucible while it is still hot can give an inaccurate reading, due to convection currents/expansion affecting the balance; it should be allowed to cool fully before each weighing.
    • Improvement: use a lid with a small hole, which lets oxygen in but reduces the loss of solid smoke/product.
    • Improvement: repeat the experiment and calculate a mean value for the mass of oxygen combined, to reduce the effect of random errors.
  • (f) Answer: See levels/indicative content.

Question 11 - Moles, Formulae and Equations

Open the included worksheet

Counting the Uncountable: Atoms, Formulae and the Mole

Original text written for Revision Library.

At the start of the nineteenth century, the chemist John Dalton proposed that every element is made of identical atoms, and that these atoms combine in fixed, whole-number ratios to form compounds. This idea explained something chemists had already noticed: a given compound always contains the same elements in the same proportion by mass, wherever the sample comes from. Dalton went further and assigned each element a relative atomic mass, a number showing how heavy its atoms are compared with one another. A few years later, the Italian scientist Amedeo Avogadro suggested that equal volumes of gases, at the same temperature and pressure, contain equal numbers of particles. His name was later given to a huge number, 6.02 * 10^23, which chemists use to count out a mole of any substance: an amount that always contains this same number of particles, however light or heavy those particles are. Relative formula mass, conservation of mass and the mole are still the basic tools chemists use today, from balancing an equation on paper to working out how many tonnes of limestone a quarry must supply to produce a given mass of quicklime, or how much of each gas is needed to manufacture ammonia in an industrial reactor.

For each question, identify the correct answer from the options given.
(a)Which equation below is correctly balanced?(1)
  • A) Mg(s) + O2(g) -> MgO(s)
  • B) 2Mg(s) + O2(g) -> 2MgO(s)
  • C) 2Mg(s) + 2O2(g) -> 2MgO(s)
  • D) Mg(s) + 2O2(g) -> 2MgO(s)
(b)Which statement correctly describes the law of conservation of mass?(1)
  • A) The total mass of the products is always greater than the total mass of the reactants, because energy is added during a reaction.
  • B) Atoms can be created during a chemical reaction, but they can never be destroyed.
  • C) No atoms are created or destroyed in a chemical reaction, so the total mass of the reactants equals the total mass of the products in a closed system.
  • D) Mass is only conserved in reactions that produce a precipitate.
(c)Glucose has the molecular formula C6H12O6. Which of the following is its empirical formula?(1)
  • A) C6H12O6
  • B) C3H6O3
  • C) CH2O
  • D) C2H4O2

Answer and mark scheme

Question 11

CreditAnswer or working
B1(a) B
B1(b) C
B1(c) C
  • (a) Answer: B
  • (b) Answer: C
  • (c) Answer: C

Question 16 - Moles, Formulae and Equations

Open the included worksheet

Counting the Uncountable: Atoms, Formulae and the Mole

Original text written for Revision Library.

At the start of the nineteenth century, the chemist John Dalton proposed that every element is made of identical atoms, and that these atoms combine in fixed, whole-number ratios to form compounds. This idea explained something chemists had already noticed: a given compound always contains the same elements in the same proportion by mass, wherever the sample comes from. Dalton went further and assigned each element a relative atomic mass, a number showing how heavy its atoms are compared with one another. A few years later, the Italian scientist Amedeo Avogadro suggested that equal volumes of gases, at the same temperature and pressure, contain equal numbers of particles. His name was later given to a huge number, 6.02 * 10^23, which chemists use to count out a mole of any substance: an amount that always contains this same number of particles, however light or heavy those particles are. Relative formula mass, conservation of mass and the mole are still the basic tools chemists use today, from balancing an equation on paper to working out how many tonnes of limestone a quarry must supply to produce a given mass of quicklime, or how much of each gas is needed to manufacture ammonia in an industrial reactor.

Calculate the number of molecules in 8.8 g of carbon dioxide, CO2.

Answer and mark scheme

Question 16

CreditAnswer or working
M1moles CO2 = 8.8/44 = 0.2 mol
M1correct method: number of molecules = moles * Avogadro constant, e.g. 0.2 * 6.02*1023
A11.20 * 1023 (molecules) cao (accept awrt 1.20*1023, e.g. 1.2*1023)
  • Answer: 1.20 * 1023 molecules

Question 12 - Structures, Properties and Nanoparticles

Open the included worksheet

A Manchester Discovery: Isolating Graphene

Original text written for Revision Library.

Graphite has been used in pencils for centuries, but it took until 2004 for scientists to isolate a single layer of it. At the University of Manchester, Andre Geim and Konstantin Novoselov repeatedly pressed strips of sticky tape onto a small piece of graphite, then onto each other, splitting the layers apart each time. Eventually they were left with flakes of carbon just one atom thick, a material now called graphene. Because each carbon atom in graphene is joined to three others by strong covalent bonds in a flat hexagonal sheet, the material is remarkably strong for its very low mass, and the one electron per carbon atom that is not used in bonding is free to move through the sheet, so graphene also conducts electricity extremely well. Geim and Novoselov were awarded the Nobel Prize in Physics in 2010 for this work, and graphene is now studied worldwide for use in flexible electronics, composite materials and water filters.

Bronze is an alloy made from copper and tin.
(a)Describe the type of bonding present in a pure metal such as copper, including reference to delocalised electrons.(2)
(b)Explain why pure copper is malleable (can be hammered or bent into shape).(2)
(c)Bronze contains tin atoms mixed in with the copper atoms. Explain, in terms of particle arrangement, why bronze is harder than pure copper.(2)

Answer and mark scheme

Question 12

CreditAnswer or working
B1(a) a giant structure of positive metal ions arranged in a regular lattice (oe)
B1(a) surrounded by a 'sea' of delocalised (free) electrons, with strong electrostatic forces of attraction between the positive ions and the delocalised electrons (metallic bonding) (oe)
M1(b) the metal ions are arranged in layers that can slide over each other when a force is applied (oe)
A1(b) the delocalised electrons continue to hold the ions together as the layers move, so the metal bends/changes shape without shattering (oe)
M1(c) tin atoms are a different size to copper atoms, so they distort the regular layers of the copper lattice (oe)
A1(c) this makes it harder for the layers of atoms to slide over each other, so more force is needed to bend/deform the alloy, making bronze harder than pure copper (oe)
  • (a) Answer: A giant lattice of positive metal ions surrounded by a sea of delocalised electrons, held together by strong electrostatic forces of attraction between the ions and the delocalised electrons (metallic bonding)
  • (b) Answer: The layers of metal ions can slide over each other when a force is applied, while the delocalised electrons continue to hold the structure together, so the metal bends into a new shape rather than shattering
  • (c) Answer: The different-sized tin atoms distort the regular layers of copper atoms, making it harder for the layers to slide over one another, so bronze is harder than pure copper

Question 11 - Structures, Properties and Nanoparticles

Open the included worksheet

A Manchester Discovery: Isolating Graphene

Original text written for Revision Library.

Graphite has been used in pencils for centuries, but it took until 2004 for scientists to isolate a single layer of it. At the University of Manchester, Andre Geim and Konstantin Novoselov repeatedly pressed strips of sticky tape onto a small piece of graphite, then onto each other, splitting the layers apart each time. Eventually they were left with flakes of carbon just one atom thick, a material now called graphene. Because each carbon atom in graphene is joined to three others by strong covalent bonds in a flat hexagonal sheet, the material is remarkably strong for its very low mass, and the one electron per carbon atom that is not used in bonding is free to move through the sheet, so graphene also conducts electricity extremely well. Geim and Novoselov were awarded the Nobel Prize in Physics in 2010 for this work, and graphene is now studied worldwide for use in flexible electronics, composite materials and water filters.

Poly(ethene) is an example of a thermosoftening polymer. Some other polymers are thermosetting.
(a)Describe, in terms of bonding between polymer chains, the structure of a thermosoftening polymer.(2)
(b)Explain why thermosoftening polymers can be melted and reshaped repeatedly, while thermosetting polymers cannot.(2)
(c)State one factor, other than the presence of cross-links, that affects the properties (such as strength or melting point) of a polymer.(1)

Answer and mark scheme

Question 11

CreditAnswer or working
B1(a) thermosoftening polymers consist of individual, tangled polymer chains (oe)
B1(a) only weak intermolecular forces act between the separate chains, with no covalent bonds (cross-links) joining one chain to another (oe)
M1(b) on heating a thermosoftening polymer, the weak intermolecular forces between chains are overcome, allowing the chains to move/slide past each other so the polymer softens and can be remoulded, then this can be repeated (oe)
A1(b) thermosetting polymers have covalent cross-links (strong covalent bonds) between chains, forming a rigid giant covalent network; these strong cross-links do not break on heating, so the polymer does not melt/soften and cannot be reshaped (oe)
B1(c) the length of the polymer chains (or the degree of branching of the chains) oe
  • (a) Answer: Thermosoftening polymers are made of individual, tangled chains held together only by weak intermolecular forces between chains, with no covalent cross-links between them
  • (b) Answer: Heating overcomes the weak forces between the separate chains of a thermosoftening polymer, letting the chains slide and the polymer be reshaped repeatedly; thermosetting polymers have strong covalent cross-links between chains that do not break on heating, so they cannot be melted or reshaped
  • (c) Answer: The average length of the polymer chains (or the amount of branching in the chains)

GCSE Chemistry Topic Workbooks runs to 4 volumes

Book 1 of 4 · 425 pages in the set

Each book is a separate free PDF.

Volume 1 · this book

107 pp · 118 Qs

Atomic Structure and the Periodic Table, Atomic Structure and the History of the Atom, The Periodic Table: Groups and Trends and 5 more

Volume 2

109 pp · 121 Qs

Concentration, Yield and Atom Economy, Chemical Changes, Reactivity, Acids and Salts and 5 more

Volume 3

98 pp · 99 Qs

Rates of Reaction, Reversible Reactions and Equilibrium, Organic Chemistry and 4 more

Volume 4

111 pp · 116 Qs

Chromatography and Instrumental Analysis, Chemistry of the Atmosphere, The Atmosphere: Evolution and Greenhouse Gases and 5 more

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.