Revision Library
Choose a subject
Menu

GCSE Chemistry Topic Workbooks · Book 2 of 4

GCSE Chemistry Topic Workbook 2

Concentration, Yield and Atom Economy, Chemical Changes, Reactivity, Acids and Salts and 5 more

Level
GCSE · Edexcel 1CH0 · AQA 8462 · OCR J248
Series
GCSE Chemistry Topic Workbooks, book 2 of 4
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 109 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 8 topics, 121 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
109 A4 pages
Chapters
8 worksheet chapters
Questions
121 · 558 marks
Answers
From page 86
Working time
About 9h 35m

What is inside

8 chapters · answers from p86

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 8 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Concentration, Yield and Atom Economy18 questions · 80 marks · about 85 min Topic guide: Concentration, Yield and Atom Economyp3
  2. 02Chemical Changes15 questions · 87 marks · about 90 min Topic guide: Chemical Changesp12
  3. 03Reactivity, Acids and Salts12 questions · 59 marks · about 60 min Topic guide: Reactivity, Acids and Saltsp24
  4. 04Electrolysis15 questions · 75 marks · about 75 min Topic guide: Electrolysisp32
  5. 05Energy Changes15 questions · 60 marks · about 60 min Topic guide: Energy Changesp42
  6. 06Exothermic and Endothermic Reactions15 questions · 58 marks · about 60 min Topic guide: Exothermic and Endothermic Reactionsp53
  7. 07Bond Energies, Cells and Fuel Cells14 questions · 80 marks · about 85 min Topic guide: Bond Energies, Cells and Fuel Cellsp63
  8. 08Rate and Extent of Chemical Change17 questions · 59 marks · about 60 min Topic guide: Rate and Extent of Chemical Changep74
  9. AnswersMark schemes for every chapterp86

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Chemistry Topic Workbook 2 includes Concentration, Yield and Atom Economy (from page 3); Chemical Changes (from page 12); Reactivity, Acids and Salts (from page 24); Electrolysis (from page 32); Energy Changes (from page 42); Exothermic and Endothermic Reactions (from page 53); Bond Energies, Cells and Fuel Cells (from page 63); Rate and Extent of Chemical Change (from page 74).

Worked question 12 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

Fatima investigates how the voltage produced by a simple chemical cell depends on the pair of metal electrodes used. She sets up cells using different pairs of metal electrodes dipped into dilute sulfuric acid, connects a voltmeter, and repeats each measurement three times. Her results are shown in Figure 2.
Figure 2: voltage produced by different pairs of metal electrodesMetal pairRepeat 1 / VRepeat 2 / VRepeat 3 / VIron and copper0.780.790.80Zinc and copper1.081.101.65Magnesium and copper2.702.722.71Magnesium and silver3.153.173.16
(a)Identify the independent variable and the dependent variable in this investigation.(2)
(b)State two variables Fatima should control to make this a fair test.(2)
(c)Identify the anomalous result in the 'zinc and copper' row of the table, and calculate the mean voltage for this pair of metals, excluding the anomalous result.(3)
(d)Describe the pattern shown by Fatima's results, linking it to the reactivity series.(2)
(e)Suggest one improvement Fatima could make to increase confidence in her conclusion.(1)
(f)The bottle of dilute sulfuric acid used is labelled with a hazard symbol showing a black exclamation mark on an orange background. Name the hazard indicated by this symbol, and state one safety precaution Fatima should take.(2)
(g)Fatima now wants to investigate how the concentration of the sulfuric acid electrolyte affects the voltage produced by a zinc and copper cell. Describe how she could adapt her method to investigate this, name one variable she would need to keep constant, and state how she should present her results to identify any pattern.(4)

Answer and mark scheme

Question 12

CreditAnswer or working
B1(a) independent variable = the pair of metals used (the metal combination) oe
B1(a) dependent variable = the voltage produced (the voltmeter reading) oe
B1(b) the concentration of the dilute sulfuric acid (electrolyte) oe
B1(b) the volume of electrolyte used and/or the size (surface area) of the electrodes and/or the distance apart of the electrodes (any second valid control) oe
B1(c) 1.65 V cao
M1(c) (1.08 + 1.10) / 2 oe
A1(c) 1.09 V cao
M1(d) the greater the difference in reactivity between the two metals used, the greater the voltage produced oe
A1(d) e.g. magnesium and silver, which are furthest apart in the reactivity series, give the highest voltage (about 3.2 V); iron and copper, which are closest together, give the lowest voltage (about 0.8 V) oe
B1(e) repeat each measurement more times (and/or test additional pairs of metals with a range of reactivity differences) oe
B1(f) irritant oe (accept harmful)
B1(f) wear eye protection/safety goggles oe (accept gloves)
B1(g) vary the concentration of the sulfuric acid electrolyte in a series of steps (e.g. by diluting a stock solution), using the same zinc and copper electrodes each time oe
B1(g) measure the voltage produced at each concentration, repeating each concentration to check for anomalies oe
B1(g) keep constant, e.g. the volume of electrolyte used, the size/surface area of the electrodes, or the distance apart of the electrodes oe
B1(g) plot a graph of voltage (y-axis) against concentration (x-axis) to identify the pattern/trend oe
  • (a) Answer: Independent variable: the pair of metals used. Dependent variable: the voltage produced (voltmeter reading).
  • (b) Answer: For example: the concentration of the dilute sulfuric acid used, and the size (surface area) of the electrodes.
  • (c) Answer: Anomalous result: 1.65 V. Mean voltage (excluding the anomaly) = (1.08 + 1.10) / 2 = 1.09 V.
  • (d) Answer: The greater the difference in reactivity between the two metals, the greater the voltage produced: magnesium and silver (furthest apart in reactivity) give the highest voltage, while iron and copper (closest together) give the lowest voltage.
  • (e) Answer: Repeat each measurement more times, and test additional pairs of metals covering a wider range of reactivity differences.
  • (f) Answer: The symbol indicates the acid is an irritant. Fatima should wear eye protection (safety goggles) throughout the investigation.
  • (g) Answer: Vary the concentration of the sulfuric acid in steps (e.g. by dilution), keeping the same zinc and copper electrodes, and measure (repeating) the voltage at each concentration. Keep the volume of electrolyte and the size/distance apart of the electrodes constant. Plot a graph of voltage against concentration to identify the pattern.

Question 7 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

A simple chemical cell can be made by placing two different metal electrodes into an electrolyte and connecting them with wires and a voltmeter, as shown in Figure 1. A student, Owusu, sets up a cell using a magnesium electrode and a silver electrode dipped into dilute sulfuric acid.
Figure 1: a simple chemical cellVvoltmeterMgAgdilute sulfuric acid(electrolyte)beaker
(a)State two components, other than the two metal electrodes, that are needed to complete this simple chemical cell.(2)
(b)Explain why this cell produces a voltage between the magnesium and silver electrodes.(2)
(c)Predict, giving a reason based on the reactivity series, whether replacing the silver electrode with a copper electrode (keeping the magnesium electrode and electrolyte the same) would increase or decrease the voltage produced.(2)

Answer and mark scheme

Question 7

CreditAnswer or working
B1(a) an electrolyte (a solution that can conduct electricity/allow ions to move) oe
B1(a) a wire (external circuit) connecting the electrodes, together with a device such as a voltmeter to measure/use the voltage produced oe
M1(b) the two metals have different tendencies to lose electrons (react to different extents) oe
A1(b) this produces a difference in electrical potential between the two electrodes, which drives electrons around the external circuit when it is completed oe
M1(c) copper is more reactive than silver (silver is the least reactive of the two) oe
A1(c) so the difference in reactivity between magnesium and copper is smaller than between magnesium and silver, so the voltage would decrease oe
  • (a) Answer: An electrolyte (here, dilute sulfuric acid) and a wire (external circuit), together with a voltmeter to measure the voltage produced.
  • (b) Answer: Magnesium and silver have different tendencies to lose electrons, so a difference in electrical potential (a voltage) is set up between the two electrodes, which drives electrons around the external circuit.
  • (c) Answer: The voltage would decrease, because copper is more reactive than silver, so the difference in reactivity between magnesium and copper is smaller than between magnesium and silver.

Question 2 - Bond Energies, Cells and Fuel Cells

Open the included worksheet

Some vehicle manufacturers are developing cars powered by hydrogen fuel cells, as an alternative to both petrol/diesel engines and rechargeable battery-electric vehicles.
(a)Give one advantage of a hydrogen fuel-cell vehicle compared with a petrol vehicle.(1)
(b)Give one advantage of a hydrogen fuel-cell vehicle compared with a rechargeable battery-electric vehicle.(1)
(c)Suggest two reasons why hydrogen fuel-cell vehicles are not yet widely used on UK roads, despite these advantages.(2)
(d)Hydrogen used in fuel cells is often produced industrially from natural gas (a fossil fuel), rather than by the electrolysis of water using renewable electricity. Explain why this affects how 'clean' hydrogen fuel-cell vehicles really are overall.(2)

Answer and mark scheme

Question 2

CreditAnswer or working
B1(a) no carbon dioxide (or other polluting exhaust gases) is produced at the point of use - only water is produced oe
B1(b) refuelling with hydrogen takes only a few minutes, much faster than recharging a battery oe
B1(c) there are very few hydrogen refuelling stations, so drivers cannot rely on being able to refuel easily oe
B1(c) hydrogen is difficult and expensive to store and transport safely, since it is flammable and has a very low density (it must be compressed or cooled) oe
M1(d) producing hydrogen from natural gas releases carbon dioxide during production, even though the fuel cell itself only produces water oe
A1(d) so the overall environmental impact of a hydrogen fuel-cell vehicle depends on how the hydrogen was produced, not just on how it is used in the vehicle oe
  • (a) Answer: No carbon dioxide or other polluting gases are produced at the point of use - only water.
  • (b) Answer: Refuelling with hydrogen takes only a few minutes, much faster than recharging a battery.
  • (c) Answer: There are very few hydrogen refuelling stations in the UK, and hydrogen is difficult, expensive and potentially hazardous to store and transport, since it is flammable and has a very low density.
  • (d) Answer: Producing hydrogen from natural gas releases carbon dioxide, even though the fuel cell itself only produces water, so the true environmental benefit depends on how the hydrogen was produced, not just how it is used.

Question 11 - Exothermic and Endothermic Reactions

Open the included worksheet

Warming Up and Cooling Down: Energy Changes in Reactions

Original text written for Revision Library.

Every chemical reaction transfers energy somewhere. In an exothermic reaction, energy is transferred to the surroundings, so the temperature of the surroundings rises; in an endothermic reaction, energy is taken in from the surroundings, so the temperature falls. Chemists picture these changes using a reaction profile: a simple graph that shows the energy of the reactants, the energy of the products, and the hump in between, called the activation energy, that a reaction must climb over before it can happen at all. These ideas are not confined to the laboratory. A hand warmer tucked into a glove releases a slow, steady trickle of heat for hours by letting iron powder react gradually with oxygen, while a sports injury cold pack chills an ankle within seconds by dissolving a solid salt in water, an endothermic process. This worksheet explores how exothermic and endothermic reactions are represented on reaction profiles, how a required practical investigation can measure the temperature changes they produce, and how these ideas explain the everyday chemistry of staying warm or cooling down.

State three safety precautions the student should take during this investigation.

Answer and mark scheme

Question 11

CreditAnswer or working
B1any one valid precaution, e.g. wear eye protection/safety goggles, a lab coat or gloves, or tie back long hair
B1a second, different valid precaution, e.g. take care handling the dilute acid, avoiding skin or eye contact and washing off any spills
B1any one from: stand up during the practical rather than sitting; do not put the thermometer down on the desk/use it to stir; work in a well-ventilated area, as carbon dioxide gas is produced (any one, oe; credit any three different valid precautions)
  • Answer: Any three from: wearing eye protection; handling the dilute acid carefully and washing off spills; standing up during the practical; not using the thermometer to stir; working in a well-ventilated area.

Question 7 - Exothermic and Endothermic Reactions

Open the included worksheet

Warming Up and Cooling Down: Energy Changes in Reactions

Original text written for Revision Library.

Every chemical reaction transfers energy somewhere. In an exothermic reaction, energy is transferred to the surroundings, so the temperature of the surroundings rises; in an endothermic reaction, energy is taken in from the surroundings, so the temperature falls. Chemists picture these changes using a reaction profile: a simple graph that shows the energy of the reactants, the energy of the products, and the hump in between, called the activation energy, that a reaction must climb over before it can happen at all. These ideas are not confined to the laboratory. A hand warmer tucked into a glove releases a slow, steady trickle of heat for hours by letting iron powder react gradually with oxygen, while a sports injury cold pack chills an ankle within seconds by dissolving a solid salt in water, an endothermic process. This worksheet explores how exothermic and endothermic reactions are represented on reaction profiles, how a required practical investigation can measure the temperature changes they produce, and how these ideas explain the everyday chemistry of staying warm or cooling down.

Higher tier only. A scientist is designing a reusable hand warmer that contains a supersaturated solution of sodium ethanoate (sodium acetate). When a small metal disc inside the pack is clicked, the solution rapidly turns into solid crystals, and the pack becomes warm. The pack can be made ready to use again by placing it in boiling water, which turns the crystals back into a solution, ready to be clicked again.
(a)State whether the crystallisation (solidifying) of the sodium ethanoate solution is exothermic or endothermic. Use information from the question to justify your answer.(2)
(b)Explain, in terms of energy transfer, why reheating the pack in boiling water is needed to make it reusable.(2)

Answer and mark scheme

Question 7

CreditAnswer or working
M1(a) exothermic
A1(a) because the pack becomes warm as the solution crystallises, showing that energy is released to the surroundings (oe)
M1(b) heating the solid crystals in boiling water melts/redissolves them, an endothermic change that takes in (absorbs) energy from the water (oe)
A1(b) this reverses the crystallisation, resetting the pack so the same amount of energy can be released again the next time it is clicked (oe)
  • (a) Answer: Exothermic; the pack becomes warm as it crystallises, showing that energy is released to the surroundings.
  • (b) Answer: Heating redissolves the crystals in an endothermic process that absorbs energy from the boiling water; this reverses the crystallisation and resets the pack so it can release that same energy again next time it is used.

GCSE Chemistry Topic Workbooks runs to 4 volumes

Book 2 of 4 · 425 pages in the set

Each book is a separate free PDF.

Volume 1

107 pp · 118 Qs

Atomic Structure and the Periodic Table, Atomic Structure and the History of the Atom, The Periodic Table: Groups and Trends and 5 more

Volume 2 · this book

109 pp · 121 Qs

Concentration, Yield and Atom Economy, Chemical Changes, Reactivity, Acids and Salts and 5 more

Volume 3

98 pp · 99 Qs

Rates of Reaction, Reversible Reactions and Equilibrium, Organic Chemistry and 4 more

Volume 4

111 pp · 116 Qs

Chromatography and Instrumental Analysis, Chemistry of the Atmosphere, The Atmosphere: Evolution and Greenhouse Gases and 5 more

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.