Revision Library
Choose a subject
Menu

GCSE Chemistry Topic Workbooks · Book 4 of 4

GCSE Chemistry Topic Workbook 4

Chromatography and Instrumental Analysis, Chemistry of the Atmosphere, The Atmosphere: Evolution and Greenhouse Gases and 5 more

Level
GCSE · Edexcel 1CH0 · AQA 8462 · OCR J248
Series
GCSE Chemistry Topic Workbooks, book 4 of 4
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 111 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 8 topics, 116 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
111 A4 pages
Chapters
8 worksheet chapters
Questions
116 · 551 marks
Answers
From page 84
Working time
About 10h 15m

What is inside

8 chapters · answers from p84

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 8 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Chromatography and Instrumental Analysis13 questions · 59 marks · about 60 min Topic guide: Chromatography and Instrumental Analysisp3
  2. 02Chemistry of the Atmosphere11 questions · 69 marks · about 70 min Topic guide: Chemistry of the Atmospherep12
  3. 03The Atmosphere: Evolution and Greenhouse Gases17 questions · 58 marks · about 60 min Topic guide: The Atmosphere: Evolution and Greenhouse Gasesp21
  4. 04Climate Change and Atmospheric Pollutants16 questions · 74 marks · about 75 min Topic guide: Climate Change and Atmospheric Pollutantsp30
  5. 05Using Resources14 questions · 72 marks · about 75 min Topic guide: Using Resourcesp41
  6. 06Using the Earth's Resources and Potable Water15 questions · 59 marks · about 60 min Topic guide: Using the Earth's Resources and Potable Waterp50
  7. 07Life Cycle Assessment, Recycling and Corrosion15 questions · 74 marks · about 100 min Topic guide: Life Cycle Assessment, Recycling and Corrosionp59
  8. 08Chemistry Required Practicals and Data Analysis15 questions · 86 marks · about 115 min Topic guide: Chemistry Required Practicals and Data Analysisp69
  9. AnswersMark schemes for every chapterp84

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Chemistry Topic Workbook 4 includes Chromatography and Instrumental Analysis (from page 3); Chemistry of the Atmosphere (from page 12); The Atmosphere: Evolution and Greenhouse Gases (from page 21); Climate Change and Atmospheric Pollutants (from page 30); Using Resources (from page 41); Using the Earth's Resources and Potable Water (from page 50); Life Cycle Assessment, Recycling and Corrosion (from page 59); Chemistry Required Practicals and Data Analysis (from page 69).

Worked question 13 - Chromatography and Instrumental Analysis

Open the included worksheet

Separating and Identifying Substances

Revision Library resource team

Chemists often need to check how pure a substance is, or work out what is in a mixture. Paper chromatography separates the different substances in a mixture, because they move through the paper at different rates, carried by a solvent. Comparing the distance a spot travels with the distance travelled by the solvent gives an Rf value, which can be compared with reference substances to identify the components of a mixture, such as a food colouring or an ink. Modern laboratories also use instrumental methods of analysis. These use machines, rather than test tubes, and give results that are faster, more sensitive and more accurate than traditional chemical tests, especially when only a very small sample is available. Flame emission spectroscopy is one such instrumental method: it identifies which metal ions are present in a sample, and how concentrated they are, by analysing the light given out when the sample is placed in a flame.

A pharmaceutical company manufactures headache tablets. Each tablet is a formulation containing an active drug plus other components. Quality-control chemists use several techniques to check the tablets meet specification.
(a)One test measures the melting point of the active drug extracted from a tablet. State how the results of this test could show that the active drug has been contaminated.(2)
(b)A second test uses paper chromatography to check that the tablet coating dye is the single permitted dye, dye X, and is not contaminated with a banned dye, dye Y. Describe how the chemists could use chromatography, including Rf values, to check for contamination with dye Y.(3)
(c)Higher tier only (Chemistry triple award). The company also uses flame emission spectroscopy to check for trace metal contamination in the tablets, rather than simple chemical tests. Evaluate why flame emission spectroscopy is more suitable than chemical tests for this quality-control purpose.(6)

Answer and mark scheme

Question 13

CreditAnswer or working
B1(a) a contaminated (impure) sample melts over a range of temperatures, usually starting below the true melting point of the pure drug, oe
B1(a) so if the extracted drug melts over a range, rather than sharply at the known melting point of the pure drug, this shows it is contaminated, oe
B1(b) run a sample of the tablet coating alongside reference spots of pure dye X and pure dye Y, on the same chromatogram, using the same solvent, oe
B1(b) calculate the Rf value(s) of the spot(s) produced by the tablet coating sample
B1(b) if the tablet sample produces only one spot, matching the Rf value of dye X, it is not contaminated; a second spot matching the Rf value of dye Y would show contamination, oe
5-6(c) L3 A well-reasoned evaluation is given, covering several advantages of flame emission spectroscopy (such as sensitivity, accuracy and the ability to measure concentration) applied clearly to why this matters for detecting trace metal contamination in tablets, leading to a justified conclusion.
3-4(c) L2 Some relevant advantages of flame emission spectroscopy are given and applied to the tablet quality-control context, but the answer lacks a balanced evaluation or clear reasoning throughout.
1-2(c) L1 A simple statement, or a short list, of one or two general points about instrumental methods is given, with little reference to the specific context of quality-controlling tablets for metal contamination.
0(c) L0 No relevant content.
  • (a) Answer: If the extracted drug melts over a range of temperatures, rather than sharply at the known melting point of the pure drug, this shows the sample is contaminated.
  • (b) Answer: Run the tablet coating alongside reference spots of dye X and dye Y on the same chromatogram. If only one spot appears, with the same Rf value as dye X, the coating is pure; an extra spot matching dye Y's Rf value would show contamination with dye Y.
  • (c) Indicative content:
    • flame emission spectroscopy is far more sensitive than chemical tests, so it can detect very low (trace) concentrations of metal contamination that a chemical test might miss
    • trace contamination is exactly the kind of small-sample, low-concentration analysis that instrumental methods are best suited to
    • it is more accurate than chemical tests, which often rely on an analyst's subjective judgement, e.g. judging a colour change or a flame colour by eye
    • it can determine the concentration of any contaminating metal ion present, not just confirm its presence, which matters for quality control (a tablet may be within or outside a safe limit)
    • results are fast, which suits the high throughput needed in pharmaceutical quality control, where many tablets or batches must be tested
    • it can identify more than one metal ion present in a mixture from a single sample or spectrum
    • counterbalancing point: the equipment is expensive and requires trained staff, but for a pharmaceutical company this cost is justified by the need for precise, reliable safety data
    • conclusion: flame emission spectroscopy is more suitable overall, because trace contamination requires the sensitivity and quantitative concentration data that chemical tests cannot reliably provide
  • (c) Answer: Levels of response part, no single correct answer; credit a balanced evaluation covering the high sensitivity of flame emission spectroscopy (able to detect trace/low concentrations of contaminating metal ions), its accuracy compared with chemical tests that rely on an analyst's judgement, its ability to measure the concentration of any contaminant (important for checking against a safety limit), and its speed (suiting high-throughput quality control), balanced against the cost of the equipment and staff training, leading to a justified conclusion. See indicative content.

Question 10 - Chromatography and Instrumental Analysis

Open the included worksheet

Separating and Identifying Substances

Revision Library resource team

Chemists often need to check how pure a substance is, or work out what is in a mixture. Paper chromatography separates the different substances in a mixture, because they move through the paper at different rates, carried by a solvent. Comparing the distance a spot travels with the distance travelled by the solvent gives an Rf value, which can be compared with reference substances to identify the components of a mixture, such as a food colouring or an ink. Modern laboratories also use instrumental methods of analysis. These use machines, rather than test tubes, and give results that are faster, more sensitive and more accurate than traditional chemical tests, especially when only a very small sample is available. Flame emission spectroscopy is one such instrumental method: it identifies which metal ions are present in a sample, and how concentrated they are, by analysing the light given out when the sample is placed in a flame.

Required practical. A technician wants to investigate the food dyes used in three different brands of orange squash, using paper chromatography, and to identify which dyes each brand contains by comparing them with reference samples.
Describe a method the technician could use to carry out this investigation and obtain valid, comparable results. In your answer, you should refer to how the chromatogram is set up, how it is run, and how the results would be analysed.

Answer and mark scheme

Question 10

CreditAnswer or working
5-6Level 3 A clear, logically ordered method is described, covering setting up the chromatogram, running it correctly, and how the results (Rf values and/or colours, compared with the reference dyes) would be used to identify the dyes present in each squash sample.
3-4Level 2 The method is partly described, covering some key practical steps, such as setting up or running the chromatogram, but with gaps in either the running of the experiment or the analysis of results. There is some logical structure.
1-2Level 1 Simple, isolated statements are made about chromatography, with little or no reference to a full practical method or to how the dyes would be identified.
0Level 0 No relevant content.
  • Indicative content:
    • draw a baseline in pencil (not pen, as pen ink would dissolve and run), near the bottom of the chromatography paper
    • use a fine pipette or capillary tube to place a small spot of each squash sample, and of each reference dye, on the baseline; label each spot
    • let each spot dry before adding more solution on top of it, to keep the spots small and concentrated
    • pour a shallow layer of solvent into a beaker, to a depth below the pencil baseline
    • suspend or hang the paper in the beaker so the baseline sits above the solvent surface (the spots must not be submerged in the solvent)
    • cover the beaker with a lid, to keep the atmosphere saturated with solvent vapour and reduce evaporation of the solvent
    • leave until the solvent has risen close to the top of the paper, then remove the paper and immediately mark the solvent front in pencil, before it evaporates
    • allow the chromatogram to dry, then measure the distance travelled by the solvent front and by each spot, from the baseline
    • calculate the Rf value of each spot using Rf = distance moved by spot / distance moved by solvent
    • compare the Rf value (and colour) of each spot from a squash sample with the Rf values of the reference dyes run on the same chromatogram, under the same conditions
    • a dye is identified as present in a squash sample if a spot's Rf value (and colour) matches a reference dye's Rf value

Answer: Levels of response question, no single correct answer; credit a logically ordered method covering setting up the chromatogram (pencil baseline, small labelled spots, solvent below the baseline, lid on the beaker), running it (leaving it until the solvent nears the top, marking the solvent front immediately), and analysing the results (measuring distances, calculating Rf values, and comparing them with reference dyes run on the same chromatogram to identify the dyes present). See indicative content.

Question 12 - Chromatography and Instrumental Analysis

Open the included worksheet

Separating and Identifying Substances

Revision Library resource team

Chemists often need to check how pure a substance is, or work out what is in a mixture. Paper chromatography separates the different substances in a mixture, because they move through the paper at different rates, carried by a solvent. Comparing the distance a spot travels with the distance travelled by the solvent gives an Rf value, which can be compared with reference substances to identify the components of a mixture, such as a food colouring or an ink. Modern laboratories also use instrumental methods of analysis. These use machines, rather than test tubes, and give results that are faster, more sensitive and more accurate than traditional chemical tests, especially when only a very small sample is available. Flame emission spectroscopy is one such instrumental method: it identifies which metal ions are present in a sample, and how concentrated they are, by analysing the light given out when the sample is placed in a flame.

A forensic scientist analyses ink from a ransom note using paper chromatography, to compare it with ink from four suspects' pens. The solvent front travels 10.0 cm from the baseline. The table shows the distance travelled by the single spot produced by each ink sample.
Ink sampleDistance travelled (cm)
Ransom note6.5
Suspect 14.0
Suspect 26.5
Suspect 38.2
Suspect 43.0
(a)Calculate the Rf value of the ransom note ink.(2)
(b)Identify which suspect's pen matches the ransom note ink. Justify your answer using Rf values.(2)
(c)The forensic scientist repeats the experiment using a different solvent and obtains a different set of Rf values. Explain why it is important to run all the ink samples on the same chromatogram, using the same solvent, when comparing Rf values.(2)

Answer and mark scheme

Question 12

CreditAnswer or working
M1(a) 6.5 / 10.0, oe correct substitution
A1(a) 0.65 cao
B1(b) Suspect 2
B1(b) Suspect 2's ink also travelled 6.5 cm, giving the same Rf value (0.65) as the ransom note ink (ecf from part a)
B1(c) an Rf value depends on the solvent used (and other conditions, such as temperature and the type of paper), oe
B1(c) so Rf values can only be validly compared if they were obtained under identical conditions, e.g. run together on the same chromatogram with the same solvent, oe
  • (a) Answer: 0.65
  • (b) Answer: Suspect 2. Their ink spot also travelled 6.5 cm, giving the same Rf value (0.65) as the ransom note ink.
  • (c) Answer: Rf values depend on the solvent (and on conditions such as temperature and paper type), so samples can only be fairly compared if they are run together, under identical conditions.

Question 12 - Life Cycle Assessment, Recycling and Corrosion

Open the included worksheet

NPK fertilisers supply nitrogen (N), phosphorus (P) and potassium (K) compounds to help crops grow well.
(a)Explain why farmers apply NPK fertilisers to their fields.(2)
(b)Phosphate rock cannot be used directly as a fertiliser because it is insoluble in water. Describe how phosphate rock is processed to produce soluble phosphate compounds for use in fertilisers.(3)
(c)Name one source used industrially to provide each of the following nutrients in NPK fertilisers: (i) nitrogen (ii) phosphorus (iii) potassium.(3)

Answer and mark scheme

Question 12

CreditAnswer or working
B1(a) crops remove nutrients (nitrogen, phosphorus and potassium compounds) from the soil as they grow oe
B1(a) fertilisers replace these nutrients, allowing higher crop yields/healthier growth in future crops oe
B1(b) phosphate rock is treated/reacted with an acid oe
B1(b) e.g. treating it with nitric acid, sulfuric acid or phosphoric acid oe
B1(b) this produces soluble calcium phosphate salts, such as single superphosphate or triple superphosphate, that plant roots can absorb oe
B1(c) (i) ammonia/ammonium compounds (e.g. ammonium nitrate) produced by the Haber process oe
B1(c) (ii) phosphate rock (treated with acid) oe
B1(c) (iii) potassium chloride or potassium sulfate, mined from underground deposits oe
  • (a) Answer: Crops remove nutrients from the soil as they grow; fertilisers replace these nutrients, allowing higher yields and healthier growth in future crops
  • (b) Answer: Phosphate rock is treated with an acid, such as nitric acid, sulfuric acid or phosphoric acid, to produce soluble calcium phosphate salts (e.g. single or triple superphosphate) that plants can absorb
  • (c) Answer: (i) Ammonia/ammonium compounds from the Haber process. (ii) Phosphate rock. (iii) Potassium chloride or potassium sulfate, mined from underground deposits

Question 9 - Life Cycle Assessment, Recycling and Corrosion

Open the included worksheet

A student compares the carbon footprint of a reusable stainless steel water bottle with single-use plastic water bottles, using simplified life cycle assessment data in Table 2.
Table 2
ItemCO2e produced during manufacture (kg)
Reusable stainless steel bottle (one bottle, lasts several years)5.8
Single-use plastic bottle (one bottle)0.20
(a)Calculate the total mass of CO2e produced by manufacturing 30 single-use plastic bottles.(2)
(b)A student who carries the reusable bottle refills it instead of buying a new single-use plastic bottle each day. Calculate the minimum whole number of single-use plastic bottles that would need to be avoided for the total CO2e saved to be GREATER than the CO2e produced by manufacturing the reusable bottle.(3)
(c)State one factor, other than manufacturing, that this simplified data does not take into account, which could affect the total environmental impact of each type of bottle.(1)

Answer and mark scheme

Question 9

CreditAnswer or working
M1(a) 30 x 0.20 oe
A1(a) 6 kg cao
M1(b) 5.8 / 0.20 oe
M1(b) = 29, so the CO2e saved would exactly equal (not exceed) the reusable bottle's manufacturing footprint at 29 bottles avoided oe
A1(b) 30 (bottles) cao
B1(c) any valid factor, e.g. the energy/water used to wash and refill the reusable bottle; the impact of disposing of the bottles at the end of their life (e.g. recycling versus landfill); the energy used to transport the bottles oe
  • (a) Answer: 6 kg CO2e
  • (b) Answer: 30 bottles
  • (c) Answer: Any valid factor, e.g. the energy and water used to wash and refill the reusable bottle, or the environmental impact of disposal at the end of each bottle's life

GCSE Chemistry Topic Workbooks runs to 4 volumes

Book 4 of 4 · 425 pages in the set

Each book is a separate free PDF.

Volume 1

107 pp · 118 Qs

Atomic Structure and the Periodic Table, Atomic Structure and the History of the Atom, The Periodic Table: Groups and Trends and 5 more

Volume 2

109 pp · 121 Qs

Concentration, Yield and Atom Economy, Chemical Changes, Reactivity, Acids and Salts and 5 more

Volume 3

98 pp · 99 Qs

Rates of Reaction, Reversible Reactions and Equilibrium, Organic Chemistry and 4 more

Volume 4 · this book

111 pp · 116 Qs

Chromatography and Instrumental Analysis, Chemistry of the Atmosphere, The Atmosphere: Evolution and Greenhouse Gases and 5 more

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.