Skip to the worksheet
Revision Library
Choose a subject

Metals and alloys - Worksheets, Questions and Revision

12 original exam-style questions - 3 pages of questions with a full mark scheme - free printable PDF.

This topic is chapter 3 of GCSE Design and Technology Topic Workbook 1 and chapter 3 of GCSE Design and Technology 10-Minute Tests.

Revision Library
revisionlibrary.co.uk
GCSE · Design and Technology

1.3 Metals and alloys

AQA 8552 · Calculator allowed · about 35 minutes
Total Marks
Name: _______________________________    Date: ____ / ____ / ______
Answer ALL questions.
1
A workshop needs a material for a hand-filed bracket. State whether mild steel is ferrous or non-ferrous, and name the element that makes it ferrous.
(Total for Question 1 is 2 marks)
2
A prototype workshop needs one complex metal handle with a hollow internal shape. Explain why investment casting could be suitable.
(Total for Question 2 is 2 marks)
3
A folding camping utensil must be stiff, resist corrosion when washed, and have low mass. Choose either stainless steel or mild steel. Explain your choice using two requirements.
(Total for Question 3 is 3 marks)
4
A manufacturer must make a small batch of 30 steel mounting plates. Each needs a different hole position for a prototype. Recommend a process from laser cutting, die casting or rolling, and justify it.
(Total for Question 4 is 2 marks)
5
A designer compares aluminium and copper. Give one useful property of each metal for a product design.
(Total for Question 5 is 2 marks)
6
A bicycle bell is made from brass, an alloy of copper and zinc. Explain one reason an alloy may be chosen instead of pure copper.
(Total for Question 6 is 2 marks)
7
A steel garden hook is left outdoors. Describe how rust forms and state one condition needed for rusting.
(Total for Question 7 is 3 marks)
8
A steel food tin has a continuous tin coating. Explain how the coating protects the steel while it remains unbroken.
(Total for Question 8 is 2 marks)
9
A product brief requires a lightweight casing that is easy to form and will be used indoors. Choose aluminium or cast iron. Give one justified choice.
(Total for Question 9 is 2 marks)
10
A fictional supplier quotes steel strip at GBP 1.80 per kg. A design uses 2.4 kg. Calculate the material cost.
(Total for Question 10 is 2 marks)
11
A fictional design brief gives density as 2.7 g/cm3 for aluminium and 7.8 g/cm3 for steel. A component volume is 50 cm³. Calculate the mass of an aluminium component.
(Total for Question 11 is 2 marks)
12
A manufacturer makes 4,000 identical aluminium drink-bottle caps. Choose one suitable production process from sand casting, die casting or hand forging. Explain your choice.
(Total for Question 12 is 2 marks)
Mark scheme · 1.3 Metals and alloys

Question 1

  • FerrousB1
  • Contains ironB1
  • Answer: Mild steel is ferrous because it contains iron.

Question 2

  • Suitable for complex shapes / pattern and mould reproduce detailB1
  • Explains hollow feature can be formed with suitable core/designB1
  • Answer: Investment casting can form a complex shape around a sacrificial pattern, including a hollow feature if the pattern and core are designed for it.

Question 3

  • Chooses stainless steelB1
  • Links strength/stiffness to utensil useB1
  • Links corrosion resistance to washingB1
  • Answer: Stainless steel is a suitable choice: it is stiff/strong enough for a utensil and resists corrosion better than uncoated mild steel when washed. Its mass depends on the design dimensions.

Question 4

  • Laser cuttingB1
  • Links flexible computer-controlled cutting / no dedicated die to small varied batchB1
  • Answer: Laser cutting, because it can cut the plate profile and varied hole positions directly from sheet without making a dedicated die.

Question 5

  • Valid aluminium propertyB1
  • Valid copper propertyB1
  • Answer: Aluminium: low density or corrosion resistance. Copper: electrical conductivity or ductility.

Question 6

  • Alloying changes/improves a property such as hardness or strengthB1
  • Links improved property to bell use / shape retentionB1
  • Answer: Adding zinc can make the material harder or stronger than pure copper, which helps the bell keep its shape in use.

Question 7

  • Iron reacts with oxygenB1
  • Water is also involved / both oxygen and water neededB1
  • Rust / hydrated iron oxide formedB1
  • Answer: Iron reacts with oxygen and water to form hydrated iron(III) oxide (rust). Both oxygen and water are needed.

Question 8

  • Barrier prevents water and oxygen reaching steelB1
  • Therefore iron does not rust while coating is intactB1
  • Answer: The tin layer keeps water and oxygen away from the steel, so the iron cannot rust.

Question 9

  • Chooses aluminiumB1
  • Links low density / formability to stated requirementB1
  • Answer: Aluminium: its low density makes the casing lighter, and it can be formed into a casing.

Question 10

  • 1.80 x 2.4M1
  • GBP 4.32A1
  • Answer: GBP 4.32

Question 11

  • 2.7 x 50M1
  • 135 gA1
  • Answer: 135 g

Question 12

  • Die castingB1
  • Links reusable die / repeatability / high volume to 4,000 identical capsB1
  • Answer: Die casting: molten aluminium is forced into a reusable die, making many identical parts efficiently.

Mark your answers

Check answers without an account. Some answers can be checked automatically; use the mark scheme to mark the rest.

Question 1

2 marks
Did your answer earn the marks?

Question 2

2 marks
Did your answer earn the marks?

Question 3

3 marks
Did your answer earn the marks?

Question 4

2 marks
Did your answer earn the marks?

Question 5

2 marks
Did your answer earn the marks?

Question 6

2 marks
Did your answer earn the marks?

Question 7

3 marks
Did your answer earn the marks?

Question 8

2 marks
Did your answer earn the marks?

Question 9

2 marks
Did your answer earn the marks?

Question 10

2 marks

Question 11

2 marks

Question 12

2 marks
Did your answer earn the marks?
Mark my answers

Keep going

Worksheets are written for Revision Library and come with a full mark scheme; a few English packs quote an out-of-copyright text, and name it on the page. Exam board names and specification codes say which qualification a pack suits: we are not affiliated with, endorsed by or approved by any exam board, and no past-paper question is reproduced here. Rights queries: hello@revisionlibrary.co.uk