Revision Library
Choose a subject
Menu

GCSE Physics 10-Minute Tests

Energy, Energy Stores, Transfers and Calculations, Efficiency, Power and Energy Resources and 24 more

Level
GCSE · Edexcel 1PH0 · AQA 8463 · OCR J249
Series
GCSE Physics 10-Minute Tests
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 106 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 27 topics, 83 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
106 A4 pages
Chapters
27 worksheet chapters
Questions
83
Answers
From page 80
Working time
About 4h 30m

What is inside

27 chapters · answers from p80

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 27 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Energy5 questions · about 10 min Topic guide: Energyp3
  2. 02Energy Stores, Transfers and Calculations4 questions · about 10 min Topic guide: Energy Stores, Transfers and Calculationsp6
  3. 03Efficiency, Power and Energy Resources2 questions · about 10 min Topic guide: Efficiency, Power and Energy Resourcesp9
  4. 04Electricity3 questions · about 10 min Topic guide: Electricityp11
  5. 05Circuits, Resistance and Components2 questions · about 10 min Topic guide: Circuits, Resistance and Componentsp14
  6. 06Mains Electricity, Power and Energy3 questions · about 10 min Topic guide: Mains Electricity, Power and Energyp17
  7. 07Particle Model of Matter3 questions · about 10 min Topic guide: Particle Model of Matterp20
  8. 08Density and the Particle Model of Matter4 questions · about 10 min Topic guide: Density and the Particle Model of Matterp23
  9. 09Particle Motion, Gas Pressure and Temperature3 questions · about 10 min Topic guide: Particle Motion, Gas Pressure and Temperaturep26
  10. 10Atomic Structure5 questions · about 10 min Topic guide: Atomic Structurep28
  11. 11Atomic Structure and the Development of the Model2 questions · about 10 min Topic guide: Atomic Structure and the Development of the Modelp31
  12. 12Radioactivity, Half-Life and Nuclear Uses2 questions · about 10 min Topic guide: Radioactivity, Half-Life and Nuclear Usesp34
  13. 13Forces5 questions · about 10 min Topic guide: Forcesp37
  14. 14Motion: Speed, Velocity and Acceleration3 questions · about 10 min Topic guide: Motion: Speed, Velocity and Accelerationp40
  15. 15Forces, Newton's Laws and Momentum2 questions · about 10 min Topic guide: Forces, Newton's Laws and Momentump43
  16. 16Pressure, Moments and Levers2 questions · about 10 min Topic guide: Pressure, Moments and Leversp45
  17. 17Waves2 questions · about 10 min Topic guide: Wavesp48
  18. 18Wave Properties and Behaviour5 questions · about 10 min Topic guide: Wave Properties and Behaviourp51
  19. 19The Electromagnetic Spectrum3 questions · about 10 min Topic guide: The Electromagnetic Spectrump54
  20. 20Magnetism and Electromagnetism4 questions · about 10 min Topic guide: Magnetism and Electromagnetismp56
  21. 21Magnetism and the Motor Effect2 questions · about 10 min Topic guide: Magnetism and the Motor Effectp59
  22. 22Electromagnetic Induction and Transformers3 questions · about 10 min Topic guide: Electromagnetic Induction and Transformersp61
  23. 23Space Physics4 questions · about 10 min Topic guide: Space Physicsp64
  24. 24The Solar System, Orbital Motion and Satellites2 questions · about 10 min Topic guide: The Solar System, Orbital Motion and Satellitesp67
  25. 25Red-shift and the Expanding Universe3 questions · about 10 min Topic guide: Red-shift and the Expanding Universep69
  26. 26Physics Equations: Recall, Rearrangement and Application3 questions · about 10 min Topic guide: Physics Equations: Recall, Rearrangement and Applicationp72
  27. 27Physics Required Practicals and Uncertainties2 questions · about 10 min Topic guide: Physics Required Practicals and Uncertaintiesp75
  28. AnswersMark schemes for every chapterp80

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Physics 10-Minute Tests includes Energy (from page 3); Energy Stores, Transfers and Calculations (from page 6); Efficiency, Power and Energy Resources (from page 9); Electricity (from page 11); Circuits, Resistance and Components (from page 14); Mains Electricity, Power and Energy (from page 17); Particle Model of Matter (from page 20); Density and the Particle Model of Matter (from page 23); Particle Motion, Gas Pressure and Temperature (from page 26); Atomic Structure (from page 28); Atomic Structure and the Development of the Model (from page 31); Radioactivity, Half-Life and Nuclear Uses (from page 34); Forces (from page 37); Motion: Speed, Velocity and Acceleration (from page 40); Forces, Newton's Laws and Momentum (from page 43); Pressure, Moments and Levers (from page 45); Waves (from page 48); Wave Properties and Behaviour (from page 51); The Electromagnetic Spectrum (from page 54); Magnetism and Electromagnetism (from page 56); Magnetism and the Motor Effect (from page 59); Electromagnetic Induction and Transformers (from page 61); Space Physics (from page 64); The Solar System, Orbital Motion and Satellites (from page 67); Red-shift and the Expanding Universe (from page 69); Physics Equations: Recall, Rearrangement and Application (from page 72); Physics Required Practicals and Uncertainties (from page 75).

Worked question 1 - Physics Required Practicals and Uncertainties

Open the included worksheet

Zara investigates how the type of surface affects the rate of emission of infrared radiation, using a Leslie cube filled with boiling water. The cube has four vertical faces of equal area: matt black, matt white, shiny black and shiny silver. An infrared detector, connected to a data logger, is held at the same fixed distance from each face in turn, and the reading (in arbitrary detector units) is recorded after one minute.
Surface: matt blackmatt whiteshiny blackshiny silver
Detector reading (units): 85654520
(a)Identify the independent variable in this investigation.(1)
(b)Identify two variables that must be controlled for this to be a valid comparison between surfaces.(2)
(c)Using the data, identify which surface emits infrared radiation at the greatest rate, and explain this in terms of the surface's properties.(2)
(d)Explain why the detector must be kept at the same fixed distance from each face of the cube.(2)

Answer and mark scheme

Question 1

CreditAnswer or working
B1(a) the type/finish of the surface (which face of the Leslie cube the detector faces), oe
B1(b) any one of: volume/mass of water in the cube; starting temperature of the water; time before each reading is taken, oe
B1(b) a second, different variable from the list above, oe; also allow the distance between the detector and each face, or the surface area of each face
B1(c) matt black (highest reading, 85 units)
B1(c) matt, dull surfaces are better emitters (and absorbers) of infrared radiation than shiny surfaces, oe
B1(d) the intensity of infrared radiation detected decreases with distance from the source, oe
B1(d) if the distance varied between readings, this would be an uncontrolled variable, so differences in the reading could not be attributed only to the surface type, oe
  • (a) Answer: The type of surface (which face of the cube is used).
  • (b) Answer: For example: the volume and starting temperature of the water in the cube, and the time before each reading is taken.
  • (c) Answer: Matt black, with the highest reading (85 units); dull, matt surfaces are better emitters of infrared radiation than shiny, polished surfaces.
  • (d) Answer: Detected intensity falls with distance from the source. If distance varied, it would be an uncontrolled variable, making it impossible to say any difference was caused only by the surface type.

Question 2 - Physics Required Practicals and Uncertainties

Open the included worksheet

State one safety precaution a student should take in each of the required practicals below, and the hazard it addresses.
(a)Heating a metal block with an electrical immersion heater in the specific heat capacity practical.(1)
(b)Directing a ray box or laser at a mirror or glass block in the light practical.(1)

Answer and mark scheme

Question 2

CreditAnswer or working
B1(a) do not touch the heater or block during or immediately after use, as they can cause burns/scalds, oe; allow using a heatproof mat
B1(b) do not look directly into the beam / do not shine it towards anyone's eyes, as it can damage the retina, oe
  • (a) Answer: Do not touch the heater or block during or shortly after use, as they get hot enough to cause burns.
  • (b) Answer: Do not look directly into the light beam, or shine it at anyone's eyes, as it can damage the retina.

Question 2 - Pressure, Moments and Levers

Open the included worksheet

Atmospheric pressure is the pressure caused by the atmosphere, the layer of air surrounding the Earth.
(a)State what causes atmospheric pressure.(1)
(b)State how atmospheric pressure changes as altitude (height above sea level) increases.(1)

Answer and mark scheme

Question 2

CreditAnswer or working
B1(a) collisions between air molecules in the atmosphere and a surface, oe (accept: the weight of the column of air above a surface)
B1(b) atmospheric pressure decreases as altitude increases, oe
  • (a) Answer: Collisions between air molecules and a surface (caused by the weight of the air above).
  • (b) Answer: Atmospheric pressure decreases as altitude increases.

Question 2 - Magnetism and the Motor Effect

Open the included worksheet

A solenoid carrying a current produces a magnetic field.
(a)Describe the shape of the magnetic field pattern outside a current-carrying solenoid, compared with the field pattern of a bar magnet.(2)
(b)Higher Tier only. State a method the student could use to work out which end of a current-carrying solenoid is its north pole, without using a compass.(2)

Answer and mark scheme

Question 2

CreditAnswer or working
B1(a) the field pattern outside the solenoid is the same shape as the field pattern of a bar magnet, oe
B1(a) field lines run from the north pole, curve around the outside, and return to the south pole (accept: it has a north pole at one end and a south pole at the other), oe
B1(b) use the right-hand grip rule, oe
B1(b) curl the fingers of the right hand in the direction of (conventional) current flow around the coil; the thumb then points towards the north pole, oe
  • (a) Answer: The same shape as a bar magnet's field: lines run from the north pole, curve round the outside, and return to the south pole.
  • (b) Answer: Use the right-hand grip rule: curl the fingers in the direction of current flow around the coil; the thumb points to the north pole.

Question 1 - Radioactivity, Half-Life and Nuclear Uses

Open the included worksheet

Nuclides can be written in the form (mass number)/(atomic number) Symbol, for example an α particle is written 4/2 He. Americium-241 (241/95 Am) is an α-emitting source used in household smoke detectors. It decays by α emission to form an isotope of neptunium (Np).
(a)Write the balanced nuclear equation for the α decay of americium-241, giving the mass number and atomic number of the neptunium nuclide formed.(2)
(b)A different isotope, americium-243 (243/95 Am), also decays by α emission. Without writing the full equation, state the mass number and atomic number of the daughter nuclide formed.(2)

Answer and mark scheme

Question 1

CreditAnswer or working
M1(a) α particle shown correctly as 4/2 He and equation attempted using conservation of mass number and atomic number
A1(a) 241/95 Am -> 237/93 Np + 4/2 He, cao
M1(b) mass number = 243 - 4 = 239
A1(b) atomic number = 95 - 2 = 93 (neptunium-239), cao
  • (a) Answer: 241/95 Am -> 237/93 Np + 4/2 He
  • (b) Answer: Mass number 239, atomic number 93 (neptunium-239).

Question 1 - Efficiency, Power and Energy Resources

Open the included worksheet

A kettle is supplied with 240000 J of electrical energy. It transfers 180000 J of this energy usefully to heat the water in the kettle. The rest of the energy is wasted to the surroundings. efficiency = useful output energy transfer / total input energy transfer
(a)Calculate the efficiency of the kettle. Give your answer as a decimal.(2)
(b)Calculate the efficiency of the kettle as a percentage.(1)

Answer and mark scheme

Question 1

CreditAnswer or working
M1(a) 180000 / 240000 (correct substitution)
A1(a) 0.75 cao
B1(b) 75%, ft their value from (a) * 100
  • (a) Answer: 0.75
  • (b) Answer: 75%

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.