Worked question 13 - Pressure, Moments and Levers
Levers, gears and pressure: making forces work harder
Original text written for Revision Library.
Whenever a spanner turns a stubborn nut, a crowbar levers up a heavy slab, or a cyclist changes gear on a hill, the same idea from physics is at work: the moment of a force, the turning effect produced when a force acts at a distance from a pivot. Engineers exploit the principle of moments to design levers and gears that let a small force, applied a long way from a pivot, balance or overcome a much larger force acting close to it. The same principle explains why a small child can balance a much heavier adult on a see-saw, simply by sitting further from the middle. Fluids exert forces too, in the form of pressure, calculated as force divided by the area it acts over. This is why a sharp knife cuts easily, while a wide ski keeps a skier from sinking into snow, and why a submarine's hull must withstand enormous pressure at great depth, where the weight of water pressing down from above is far greater than at the surface. Even the air around us has weight, producing an atmospheric pressure that gradually falls the higher you climb, until it becomes too thin to breathe without extra oxygen.
Answer and mark scheme
Question 13
| Credit | Answer or working |
|---|---|
| B1 | (a) independent variable: the weight, W, hung on the right of the pivot |
| B1 | (a) dependent variable: the balancing distance, d, from the pivot |
| B1 | (b) the fixed weight (2.0 N) and its distance from the pivot (40 cm) on the left must stay the same throughout, oe |
| B1 | (b) reason: so that the moment being balanced does not change, allowing a fair comparison between the different values of W, oe |
| B1 | (c) at the centre of mass, the ruler's own weight acts through the pivot, so it produces no moment about the pivot, oe |
| B1 | (c) so the weight of the ruler itself does not need to be included in the moment calculations, oe |
| B1 | (d) 80 Ncm (2.0 x 40) |
| M1 | (e) calculates at least two moments correctly, e.g. 2.0 x 40.0 = 80; 2.5 x 32.0 = 80 |
| A1 | (e) all four moments equal 80 Ncm (2.0x40.0, 2.5x32.0, 4.0x20.0, 5.0x16.0 all = 80) |
| B1 | (e) conclusion: the moment on the right always equals the moment on the left (80 Ncm) when the ruler is balanced, confirming the principle of moments, oe |
| B1 | (f) e.g. use a fixed pointer/fiducial marker and view it at eye level to judge when the ruler is exactly horizontal, or repeat each balance point several times and calculate a mean value of d |
| B1 | (f) linked reason: reduces the effect of random error (e.g. parallax error) in judging the balance point, giving a more precise value of d, oe |
| B1 | (g) hazard, e.g. the weights could fall and injure feet, or the ruler could fall off the pivot |
| B1 | (g) precaution, e.g. work over a soft surface away from the desk edge, or keep feet clear of the weights, or use masses no larger than needed |
- (a) Answer: Independent: the weight W. Dependent: the balancing distance d.
- (b) Answer: The fixed 2.0 N weight and its 40 cm distance, so the moment being balanced stays the same for a fair comparison.
- (c) Answer: At its centre of mass, the ruler's weight acts through the pivot and produces no moment, so it can be ignored in the calculations.
- (d) Answer: 80 Ncm
- (e) Answer: All four moments equal 80 Ncm, confirming the principle of moments.
- (f) Answer: E.g. use a fixed pointer viewed at eye level, reducing parallax error and giving a more precise value of d.
- (g) Answer: Hazard: falling weights could injure feet. Precaution: keep feet clear of the weights / work over a soft surface.









