Revision Library
Choose a subject
Menu

GCSE Physics Topic Workbooks · Book 2 of 4

GCSE Physics Topic Workbook 2

Density and the Particle Model of Matter, Particle Motion, Gas Pressure and Temperature, Atomic Structure and 4 more

Level
GCSE · Edexcel 1PH0 · AQA 8463 · OCR J249
Series
GCSE Physics Topic Workbooks, book 2 of 4
Suitable for
Years 10-11, AQA / Edexcel / OCR
FreePDF download · 2027 edition · 95 A4 pages
  • One file, prints straight to A4
  • No account, no password

Workbooks like this one, with 7 topics, 106 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.

Pages
95 A4 pages
Chapters
7 worksheet chapters
Questions
106 · 492 marks
Answers
From page 74
Working time
About 10h 15m

What is inside

7 chapters · answers from p74

Each chapter starts with a page showing its marks and a suggested time, followed by the questions. The mark schemes for all 7 chapters are at the back, so the book works for homework, a timed test or revision.

  1. 01Density and the Particle Model of Matter17 questions · 71 marks · about 95 min Topic guide: Density and the Particle Model of Matterp3
  2. 02Particle Motion, Gas Pressure and Temperature13 questions · 55 marks · about 75 min Topic guide: Particle Motion, Gas Pressure and Temperaturep14
  3. 03Atomic Structure15 questions · 83 marks · about 85 min Topic guide: Atomic Structurep22
  4. 04Atomic Structure and the Development of the Model14 questions · 67 marks · about 90 min Topic guide: Atomic Structure and the Development of the Modelp32
  5. 05Radioactivity, Half-Life and Nuclear Uses15 questions · 81 marks · about 110 min Topic guide: Radioactivity, Half-Life and Nuclear Usesp42
  6. 06Forces16 questions · 72 marks · about 75 min Topic guide: Forcesp54
  7. 07Motion: Speed, Velocity and Acceleration16 questions · 63 marks · about 85 min Topic guide: Motion: Speed, Velocity and Accelerationp64
  8. AnswersMark schemes for every chapterp74

Each chapter is drawn from one of our worksheet packs. Follow a chapter title for the full pack on its own page, or browse every GCSE Science pack. Every book on the shelf is a complete printable workbook of up to 120 A4 pages.

Explore this volume

GCSE Physics Topic Workbook 2 includes Density and the Particle Model of Matter (from page 3); Particle Motion, Gas Pressure and Temperature (from page 14); Atomic Structure (from page 22); Atomic Structure and the Development of the Model (from page 32); Radioactivity, Half-Life and Nuclear Uses (from page 42); Forces (from page 54); Motion: Speed, Velocity and Acceleration (from page 64).

Worked question 8 - Atomic Structure and the Development of the Model

Open the included worksheet

A Model Under Construction

Original text written for Revision Library.

For most of the 19th century, scientists pictured the atom as a tiny, solid sphere that could not be divided into anything smaller. This changed in 1897, when J.J. Thomson discovered the electron, a negatively charged particle far lighter than a whole atom. Since atoms themselves have no overall charge, Thomson reasoned that the negative electrons had to be balanced by some positive charge, and he proposed the 'plum pudding' model: a ball of positive charge with tiny negative electrons scattered through it. This idea held for over a decade, until Ernest Rutherford asked two of his students, Hans Geiger and Ernest Marsden, to fire alpha particles at a very thin sheet of gold foil. Almost all of the alpha particles passed straight through, as expected, but a small number were deflected through large angles, and a very small number bounced almost straight back. Rutherford later said it was 'as if you had fired a fifteen-inch shell at a piece of tissue paper and it came back and hit you.' The plum pudding model could not explain this, so Rutherford proposed a new nuclear model: almost all of an atom's mass and all of its positive charge are concentrated in a tiny, dense nucleus at the centre, surrounded by mostly empty space. Niels Bohr then adapted this model further, suggesting that electrons do not orbit at random but occupy fixed shells, or energy levels, at set distances from the nucleus. Finally, in 1932, James Chadwick provided the evidence needed to show that the nucleus also contains neutral particles called neutrons, alongside positively charged protons. This gave scientists the model of the atom still used today, and explained why atoms of the same element can have different masses: isotopes.

Use the information in the source text above, and the data below, to answer this question about the α particle scattering experiment (required practical style).

A student repeats a version of the experiment, firing α particles at a thin gold foil and counting how many are detected at different angles of deflection, using a fixed counting time.
Angle of deflectionNumber of α particles detected
0 to 10 degrees (undeflected, almost straight through)8200
10 to 90 degrees (small/moderate deflection)140
More than 90 degrees (large deflection, some almost straight back)6

Total α particles detected = 8346
(a)Describe the set-up of this experiment.(2)
(b)Using the data above, calculate the percentage of α particles that were deflected through more than 90 degrees. Give your answer to 2 significant figures.(3)
(c)The plum pudding model predicted that α particles fired at the foil would all pass through with little or no deflection. Use the data above to explain why the results did not fully support this prediction.(3)
(d)Explain what the results suggest about (i) the size of the nucleus compared with the size of the atom, and (ii) how the positive charge and mass of the atom are distributed.(3)
(e)Suggest one improvement to this experimental method that would increase the reliability of the results.(1)
(f)State one variable that should be controlled (kept the same) throughout this experiment, and explain why.(1)

Answer and mark scheme

Question 8

CreditAnswer or working
B1(a) a source of α particles fires (emits) a narrow beam of α particles at a very thin sheet of gold foil, oe
B1(a) a detector (e.g. a movable fluorescent/scintillation screen) placed around the foil records the number of α particles scattered at each angle, usually inside a vacuum chamber so the α particles are not absorbed by air, oe
M1(b) total number of α particles detected = 8200 + 140 + 6 (= 8346)
M1(b) percentage = (6 / 8346) x 100, oe
A1(b) = 0.072% (2 s.f.), awrt 0.072%
B1(c) most α particles (8200 out of 8346) did pass straight through with little deflection, which was consistent with the prediction
B1(c) however, a small number (140) were deflected by a small to moderate angle, and a very small number (6) were deflected by more than 90 degrees, some almost straight back
B1(c) this large-angle deflection was not predicted by the plum pudding model, since spread-out (dilute) positive charge could not repel an α particle strongly enough to reverse its direction, oe
B1(d) the nucleus must be very small compared with the whole atom, since most α particles pass through empty space without being deflected
B1(d) the positive charge of the atom must be concentrated in a small volume (the nucleus), because only a concentrated charge could repel/deflect an α particle through a large angle
B1(d) most of the mass of the atom must be concentrated in the nucleus, because only a very massive object could reverse the direction of a fast-moving α particle, oe
B1(e) repeat the count at each angle (for the same length of time) and calculate a mean, oe e.g. use a longer counting time, or more than one detector
B1(f) any valid control variable with a correct reason, e.g. the thickness of the gold foil (or the activity/energy of the α source, or the counting time) should be kept constant, because changing it would also change the pattern of deflection, making it hard to link the results only to the structure of the atom, oe
  • (a) Answer: An α source directs a narrow beam of α particles at thin gold foil; a movable detector around the foil (in a vacuum) records how many α particles are scattered at each angle.
  • (b) Answer: 0.072% (2 s.f.)
  • (c) Answer: Most particles passed straight through, supporting the idea of mostly empty space, but a very small number were deflected by more than 90 degrees, which spread-out positive charge (as in the plum pudding model) could not explain.
  • (d) Answer: The nucleus is very small compared with the atom, but concentrates almost all of the atom's positive charge and most of its mass.
  • (e) Answer: Repeat the count at each angle (for the same counting time) and take a mean, to reduce the effect of the random nature of radioactive emission.
  • (f) Answer: E.g. the thickness of the gold foil must be kept the same, otherwise a thicker patch could deflect more particles for a reason unrelated to atomic structure.

Question 14 - Atomic Structure and the Development of the Model

Open the included worksheet

A Model Under Construction

Original text written for Revision Library.

For most of the 19th century, scientists pictured the atom as a tiny, solid sphere that could not be divided into anything smaller. This changed in 1897, when J.J. Thomson discovered the electron, a negatively charged particle far lighter than a whole atom. Since atoms themselves have no overall charge, Thomson reasoned that the negative electrons had to be balanced by some positive charge, and he proposed the 'plum pudding' model: a ball of positive charge with tiny negative electrons scattered through it. This idea held for over a decade, until Ernest Rutherford asked two of his students, Hans Geiger and Ernest Marsden, to fire alpha particles at a very thin sheet of gold foil. Almost all of the alpha particles passed straight through, as expected, but a small number were deflected through large angles, and a very small number bounced almost straight back. Rutherford later said it was 'as if you had fired a fifteen-inch shell at a piece of tissue paper and it came back and hit you.' The plum pudding model could not explain this, so Rutherford proposed a new nuclear model: almost all of an atom's mass and all of its positive charge are concentrated in a tiny, dense nucleus at the centre, surrounded by mostly empty space. Niels Bohr then adapted this model further, suggesting that electrons do not orbit at random but occupy fixed shells, or energy levels, at set distances from the nucleus. Finally, in 1932, James Chadwick provided the evidence needed to show that the nucleus also contains neutral particles called neutrons, alongside positively charged protons. This gave scientists the model of the atom still used today, and explained why atoms of the same element can have different masses: isotopes.

The plum pudding model predicted that, because the positive charge of an atom was spread evenly throughout it, α particles fired at a thin gold foil should all pass through with little or no deflection.
(a)Evaluate why the results of the α particle scattering experiment led scientists to reject the plum pudding model in favour of the nuclear model.(4)

Answer and mark scheme

Question 14

CreditAnswer or working
B1(a) the plum pudding model predicted little or no deflection, and most α particles observed did pass straight through with little deflection, broadly matching this part of the prediction
B1(a) however, a small number of α particles were deflected through large angles, and a very small number bounced back almost the way they had come, which was not predicted
B1(a) spread-out (dilute) positive charge, as in the plum pudding model, could not repel an α particle strongly enough to cause this large-angle deflection or reversal
B1(a) this large-angle scattering could only be explained by a concentrated, dense region of positive charge (a small nucleus), so the plum pudding model was rejected in favour of the nuclear model, oe
  • (a) Answer: The unexpected large-angle deflections (and rare backward bounces) of some α particles could not be explained by evenly spread-out positive charge; they could only be explained by a small, concentrated, dense positive nucleus, so the nuclear model replaced the plum pudding model.

Question 12 - Atomic Structure and the Development of the Model

Open the included worksheet

A Model Under Construction

Original text written for Revision Library.

For most of the 19th century, scientists pictured the atom as a tiny, solid sphere that could not be divided into anything smaller. This changed in 1897, when J.J. Thomson discovered the electron, a negatively charged particle far lighter than a whole atom. Since atoms themselves have no overall charge, Thomson reasoned that the negative electrons had to be balanced by some positive charge, and he proposed the 'plum pudding' model: a ball of positive charge with tiny negative electrons scattered through it. This idea held for over a decade, until Ernest Rutherford asked two of his students, Hans Geiger and Ernest Marsden, to fire alpha particles at a very thin sheet of gold foil. Almost all of the alpha particles passed straight through, as expected, but a small number were deflected through large angles, and a very small number bounced almost straight back. Rutherford later said it was 'as if you had fired a fifteen-inch shell at a piece of tissue paper and it came back and hit you.' The plum pudding model could not explain this, so Rutherford proposed a new nuclear model: almost all of an atom's mass and all of its positive charge are concentrated in a tiny, dense nucleus at the centre, surrounded by mostly empty space. Niels Bohr then adapted this model further, suggesting that electrons do not orbit at random but occupy fixed shells, or energy levels, at set distances from the nucleus. Finally, in 1932, James Chadwick provided the evidence needed to show that the nucleus also contains neutral particles called neutrons, alongside positively charged protons. This gave scientists the model of the atom still used today, and explained why atoms of the same element can have different masses: isotopes.

A gold atom has a radius of about 1.4 x 10-10 m. The nucleus of a gold atom has a radius of about 7.0 x 10-15 m.
(a)Calculate how many times bigger the radius of a gold atom is than the radius of its nucleus. Give your answer in standard form.(3)

Answer and mark scheme

Question 12

CreditAnswer or working
M1(a) (1.4 x 10-10) / (7.0 x 10-15), oe
M1(a) (1.4 / 7.0) x 10-10 - (-15) = 0.2 x 105, oe correct handling of the power of ten
A1(a) = 2 x 104 (20 000) times bigger, cao, awrt 2 x 104
  • (a) Answer: 2 x 104 (20 000) times bigger.

Question 8 - Radioactivity, Half-Life and Nuclear Uses

Open the included worksheet

Radiation at Work: From Hospital Wards to Power Stations

Original text written for Revision Library.

Radioactive sources are used across the UK every day, often without most people realising it. In hospitals, gamma-emitting tracers such as technetium-99m are injected into patients so that doctors can see inside the body using a gamma camera, without the need for surgery. In industry, beta sources sit inside rollers at paper mills, constantly checking that each sheet is the correct thickness. Even the humble smoke detector on a kitchen ceiling usually contains a tiny alpha source. Meanwhile, nuclear power stations such as Hinkley Point C in Somerset use controlled nuclear fission to generate electricity for millions of homes, releasing no carbon dioxide while doing so. Understanding half-life, radiation hazards and the differences between alpha, beta, gamma and neutron radiation helps scientists and engineers choose the right type of radiation, and the right isotope, for each job, and to use these sources safely.

The properties of α, β and γ radiation make each type suited to different practical uses. For each use below, explain why the stated type of radiation is suitable.
(a)Smoke detectors contain a small radioactive source that ionises the air between two electrodes, allowing a small current to flow. Explain why an α source (rather than β or γ) is used.(2)
(b)In a paper mill, a radioactive source is placed on one side of the paper as it is produced, with a detector on the other side, to monitor its thickness. Explain why a β source (rather than α or γ) is used.(2)
(c)Gamma radiation is used to sterilise medical equipment and some foods. Explain why γ (rather than α or β) is suitable for this use.(2)
(d)A γ-emitting isotope with a short half-life, such as technetium-99m, is injected into patients as a medical tracer so doctors can image internal organs. Explain why both properties, γ emission and short half-life, make it suitable for this use.(2)

Answer and mark scheme

Question 8

CreditAnswer or working
B1(a) α radiation has a short range in air and is strongly ionising, so it can ionise the air in the small gap between the electrodes, oe
B1(a) it is easily absorbed by smoke particles, cutting the ionisation/current and triggering the alarm; γ is too weakly ionising and would pass through smoke without being absorbed, and β has a longer range than needed, oe
B1(b) β radiation is partially absorbed by the paper, so the amount reaching the detector changes as the thickness changes, allowing the thickness to be monitored, oe
B1(b) α would be completely absorbed even by thin paper, giving no useful variation in signal; γ would pass through with very little absorption regardless of thickness changes, oe
B1(c) γ radiation is highly penetrating, so it can pass through packaging and equipment, killing bacteria/microorganisms throughout the item, oe
B1(c) it does not need direct contact and does not make the equipment radioactive, and does not heat or melt the equipment unlike heat sterilisation; α and β would not penetrate the packaging, oe
B1(d) γ radiation can pass out of the body to be detected externally by a γ camera without being significantly absorbed by tissue, unlike α or β, which would be absorbed inside the body, oe
B1(d) a short half-life means the isotope decays away quickly, reducing the total radiation dose received and the length of time the patient remains radioactive, oe
  • (a) Answer: Alpha is strongly ionising over a short range, so it ionises the air gap but is readily absorbed by smoke, cutting the current and triggering the alarm.
  • (b) Answer: Beta is partially absorbed by the paper, so the detector reading varies usefully with thickness; α would be fully absorbed and γ barely absorbed at all.
  • (c) Answer: Gamma penetrates packaging/equipment fully, killing microorganisms throughout, without leaving the item radioactive or damaging it with heat.
  • (d) Answer: Gamma escapes the body to be detected externally with minimal tissue damage; the short half-life limits the patient's total radiation dose and exposure time.

Question 9 - Radioactivity, Half-Life and Nuclear Uses

Open the included worksheet

Radiation at Work: From Hospital Wards to Power Stations

Original text written for Revision Library.

Radioactive sources are used across the UK every day, often without most people realising it. In hospitals, gamma-emitting tracers such as technetium-99m are injected into patients so that doctors can see inside the body using a gamma camera, without the need for surgery. In industry, beta sources sit inside rollers at paper mills, constantly checking that each sheet is the correct thickness. Even the humble smoke detector on a kitchen ceiling usually contains a tiny alpha source. Meanwhile, nuclear power stations such as Hinkley Point C in Somerset use controlled nuclear fission to generate electricity for millions of homes, releasing no carbon dioxide while doing so. Understanding half-life, radiation hazards and the differences between alpha, beta, gamma and neutron radiation helps scientists and engineers choose the right type of radiation, and the right isotope, for each job, and to use these sources safely.

A student investigates the half-life of a radioactive source using a Geiger-Muller (GM) tube connected to a counter (required practical style).
Time (min)Raw count rate (cpm)Corrected count rate (cpm)081880014184002218X3118100468Y54325
(a)Before the experiment, the student records the background count rate three times: 18, 20 and 16 counts per minute (cpm). Calculate the mean background count rate.(1)
(b)The student then measures the count rate from the source every minute. Her results are shown below (corrected count rate = raw count rate minus the mean background count rate found in part (a)).

Time (min): 0, 1, 2, 3, 4, 5
Raw count rate (cpm): 818, 418, 218, 118, 68, 43
Corrected count rate (cpm): 800, 400, X, 100, Y, 25

Calculate the missing corrected count rate values X (at 2 minutes) and Y (at 4 minutes).
(2)
(c)Use the corrected count rate values from part (b) to determine the half-life of the source. Show your working.(3)
(d)The student repeats the whole experiment two more times and calculates a mean half-life from her three sets of results. Explain how this improves the quality of her conclusion.(1)
(e)State one precaution the student should take when handling the radioactive source, to reduce her exposure to radiation.(1)
(f)The source used in this experiment emits β radiation. Suggest why a GM tube is a more suitable method of detecting this radiation than simply observing the source.(2)

Answer and mark scheme

Question 9

CreditAnswer or working
B1(a) 18 cpm, cao
B1(b) X = 200 (218 - 18), cao
B1(b) Y = 50 (68 - 18), cao
M1(c) recognises the corrected count rate halves at each successive time shown: 800, 400, 200, 100, 50, 25
M1(c) identifies that this halving occurs at regular 1-minute intervals throughout the data
A1(c) half-life = 1 minute, cao
B1(d) repeating and taking a mean reduces the effect of random error/anomalous readings, giving a more precise and reliable half-life value, oe
B1(e) any one of: use tongs/forceps (never handle directly); keep the source at arm's length/maximise distance; store it in a lead-lined container when not in use; minimise the time the source is out of its container; do not point the source at herself or others, oe
M1(f) β radiation cannot be seen, heard or felt, so it cannot be detected using human senses, oe
A1(f) a GM tube detects ionising radiation directly, producing an electrical pulse each time a particle enters it, which can be counted to give an objective, quantitative measurement, oe
  • (a) Answer: 18 counts per minute
  • (b) Answer: X = 200 cpm, Y = 50 cpm
  • (c) Answer: 1 minute
  • (d) Answer: Repeating and averaging reduces the effect of random error, giving a more precise and reliable half-life value.
  • (e) Answer: Use tongs to handle the source (or another valid precaution, e.g. maximise distance, minimise handling time, or use shielding).
  • (f) Answer: Beta radiation cannot be detected by human senses; a GM tube detects each ionising particle electronically, giving an accurate, quantitative count rate.

GCSE Physics Topic Workbooks runs to 4 volumes

Book 2 of 4 · 353 pages in the set

Each book is a separate free PDF.

Volume 1

91 pp · 102 Qs

Energy, Energy Stores, Transfers and Calculations, Efficiency, Power and Energy Resources and 4 more

Volume 2 · this book

95 pp · 106 Qs

Density and the Particle Model of Matter, Particle Motion, Gas Pressure and Temperature, Atomic Structure and 4 more

Volume 3

89 pp · 99 Qs

Forces, Newton's Laws and Momentum, Pressure, Moments and Levers, Waves and 4 more

Volume 4

78 pp · 94 Qs

Electromagnetic Induction and Transformers, Space Physics, The Solar System, Orbital Motion and Satellites and 3 more

More GCSE books

GCSE Biology Exam Papers Set A

102 pp · 94 Qs

Year 10 Paper 1: Cells and Body Systems, Year 10 Paper 2: Organisation and Energy, Year 10 Paper 3: Cells, Digestion and Respiration and 3 more

Want a different mix of topics?

Sitting an exam soon? Build a GCSE Combined Science mock paper or print a ready-made one.