Skip to the worksheet
Revision Library
Choose a subject

Mechanisms and Motion - Worksheets, Questions and Revision

12 original exam-style questions - 3 pages of questions with a full mark scheme - free printable PDF.

This topic is chapter 7 of GCSE Design and Technology Topic Workbook 1 and chapter 7 of GCSE Design and Technology 10-Minute Tests.

Revision Library
revisionlibrary.co.uk
GCSE · Design and Technology

1.7 Mechanisms and Motion

AQA 8552 · Calculator allowed · about 30 minutes
Total Marks
Name: _______________________________    Date: ____ / ____ / ______
Answer ALL questions.
1
A display turntable rotates continuously in one direction about a fixed vertical axis. Name the type of motion.
(Total for Question 1 is 1 mark)
2
A 15-tooth driver turns a 45-tooth gear. That gear is fixed to the same shaft as a 10-tooth compound driver, which meshes with a 40-tooth output gear. The input turns at 240 rpm. Find the output speed. Assume ideal gears and no slip.
(Total for Question 2 is 3 marks)
3
A hand-operated mixing paddle must turn continuously in one direction. Its handle is turned by the user, and the paddle shaft must turn more slowly but with greater ideal torque. Choose a suitable mechanism from a pair of meshing gears, a crank and slider, or a cam and follower. The available gears are 12-tooth input and 36-tooth output gears. Explain the choice and calculate the output speed ratio as output speed divided by input speed.
(Total for Question 3 is 3 marks)
4
A small ventilation flap must repeatedly move from 0 degrees to 60 degrees and back, with a pause at each end. The motor shaft rotates continuously. The design must use one simple mechanism selected from a crank and slider, a cam and follower, or a pair of meshing gears. Select the best mechanism and explain how its output suits the requirement.
(Total for Question 4 is 3 marks)
5
A toy car moves in a straight line along a level track without changing its orientation. Name the type of motion.
(Total for Question 5 is 1 mark)
6
A windscreen wiper blade turns through 70 degrees, stops, then turns back through 70 degrees about the same pivot. State the type of motion.
(Total for Question 6 is 1 mark)
7
A crank pin moves around a circular path while a connecting rod makes a piston move back and forth along a straight guide. State the motion conversion at the mechanism output.
(Total for Question 7 is 1 mark)
8
A first-class lever has its pivot midway between the effort and load. The effort acts 0.30 m from the pivot and the load acts 0.30 m from it. An effort of 40 N is applied at right angles to the lever. Calculate the load force when balanced.
(Total for Question 8 is 2 marks)
9
A second-class lever is used to lift a 180 N load. The pivot-to-effort distance is 0.75 m and the pivot-to-load distance is 0.25 m. Both forces act at right angles. Calculate the ideal effort force.
(Total for Question 9 is 2 marks)
10
A lever has an effort arm of 0.80 m and a load arm of 0.20 m. The effort is 25 N and the lever is balanced, with both forces at right angles. Calculate the load force.
(Total for Question 10 is 2 marks)
11
A 12-tooth driver gear turns clockwise at 90 revolutions per minute and meshes directly with a 36-tooth driven gear. State the driven gear direction and calculate its speed.
(Total for Question 11 is 3 marks)
12
A 20-tooth driver gear turns at 120 rpm and meshes directly with a 30-tooth driven gear. Calculate the driven gear speed and state whether the output has increased or decreased speed.
(Total for Question 12 is 3 marks)
Mark scheme · 1.7 Mechanisms and Motion

Question 1

  • rotary (circular) motionB1
  • Answer: Rotary motion

Question 2

  • first stage speed = 240 x 15/45 = 80 rpmM1
  • second stage speed = 80 x 10/40M1
  • output speed = 20 rpmA1
  • Answer: 20 rpm

Question 3

  • select a pair of meshing gearsB1
  • ratio = driver teeth / driven teeth = 12/36M1
  • output speed / input speed = 1/3; output turns more slowly, giving an ideal torque increase by a factor of 3A1
  • Answer: Pair of meshing gears; speed ratio 1:3 (output/input = 1/3), ideal torque multiplication 3

Question 4

  • select a cam and followerB1
  • a shaped cam driven by the continuous rotary shaft can make a follower move back and forthB1
  • a cam profile with dwell regions can pause the flap at both ends; connect follower to pivoted flap to give angular oscillationB1
  • Answer: Cam and follower; its profile can create reciprocating follower motion with dwell, linked to the flap pivot to produce the required oscillation.

Question 5

  • linear motionB1
  • Answer: Linear motion

Question 6

  • oscillating motionB1
  • Answer: Oscillating motion

Question 7

  • rotary motion to reciprocating motionB1
  • Answer: Rotary to reciprocating motion

Question 8

  • mechanical advantage = effort arm / load arm = 0.30 / 0.30 = 1M1
  • load = effort x mechanical advantage = 40 x 1 = 40 NA1
  • Answer: 40 N

Question 9

  • effort x 0.75 = 180 x 0.25, or effort = load x load arm / effort armM1
  • effort = 180 x 0.25 / 0.75 = 60 NA1
  • Answer: 60 N

Question 10

  • mechanical advantage = 0.80 / 0.20 = 4M1
  • load = 25 x 4 = 100 NA1
  • Answer: 100 N

Question 11

  • driven gear turns anticlockwiseB1
  • speed ratio is 12 / 36 = 1/3; driven speed = 90 x 1/3M1
  • 30 revolutions per minuteA1
  • Answer: Anticlockwise at 30 rpm

Question 12

  • speed ratio = driver teeth / driven teeth = 20 / 30 = 2/3M1
  • driven speed = 120 x 2/3 = 80 rpmA1
  • speed decreasesB1
  • Answer: 80 rpm; speed decreases

Mark your answers

Check answers without an account. Some answers can be checked automatically; use the mark scheme to mark the rest.

Question 1

1 mark

Question 2

3 marks

Question 3

3 marks
Did your answer earn the marks?

Question 4

3 marks
Did your answer earn the marks?

Question 5

1 mark

Question 6

1 mark

Question 7

1 mark
Did your answer earn the marks?

Question 8

2 marks

Question 9

2 marks

Question 10

2 marks

Question 11

3 marks

Question 12

3 marks
Did your answer earn the marks?
Mark my answers

Keep going

Worksheets are written for Revision Library and come with a full mark scheme; a few English packs quote an out-of-copyright text, and name it on the page. Exam board names and specification codes say which qualification a pack suits: we are not affiliated with, endorsed by or approved by any exam board, and no past-paper question is reproduced here. Rights queries: hello@revisionlibrary.co.uk