Revision Library
Choose a subject
Menu

11+ Maths Worksheets

Choose from 218 11+ Maths worksheet packs, covering 4,432 printable pages. This view is for finding a focused sheet to print: each PDF keeps one topic together and ends with its own full mark scheme.

GL AssessmentCEM
packs
218
question pages
3,716
printable pages
4,432

Free for personal and classroom use - see copyright & terms.

See the method: Place Value and Ordering

Order these numbers from smallest to largest: 5.06, 5.6, 5.605, 5.65

  1. Write every number to three decimal places by padding with zeros: 5.060, 5.600, 5.605, 5.650.
  2. Compare the units digit first: all four numbers have 5 units, so compare the tenths digit next.
  3. 5.060 has 0 tenths, which is smaller than the 6 tenths in the other three numbers, so 5.06 is the smallest.
  4. Among 5.600, 5.605 and 5.650, compare the hundredths digit: 5.650 has 5 hundredths, larger than the 0 hundredths in the other two, so 5.65 is the largest of these three.
  5. Compare 5.600 and 5.605 using the thousandths digit: 5.605 has 5 thousandths against 0, so 5.605 is larger than 5.6.

Choosing 11+ Maths worksheets

Use this worksheet page after checking an attempt. Begin with the first step that stopped matching the intended method, then choose the strand and pack title that address that step. A wrong place value, a fraction error and an uncertain choice of operation call for different practice. The strand filters help narrow the catalogue, and the pack description confirms what a particular download covers. If the pupil cannot explain the idea behind the correction, revisit the matching 11+ revision guide before trying another sheet. If the idea is secure, use a focused worksheet to practise the method independently.

After the next attempt, mark every question and look for a repeated pattern. Separate reading the question, selecting a method, carrying out the calculation and recording the final answer. This makes the next choice specific: repeat the same skill when the method remains uncertain, or move to a connected skill when the work is accurate. Use the supplied mark scheme to check the response, and keep the question wording together with its answer while reviewing. A topic pack can provide concentrated practice; broader work can follow once the pupil can select the method without a prompt from the heading.

Place value and ordering

Choose place value practice when a pupil reads a digit as its face value rather than its value in the number. Ask them to name the column before writing the answer. A brief check like the one below can reveal whether a longer calculation is likely to be affected by the same misunderstanding. Once the digit values are clear, use the matching pack for ordering or rounding and compare the result with the original numbers.

Worked example. In the number 6,732, what is the value of the digit 7?

  1. The 7 is in the hundreds column of 6,732.
  2. Its value is 7 hundreds, which is 700.
  3. B1: 700.

Answer: 700

Four operations in context

For a worded operations sheet, use the marked answer to check both the operation and the calculation. If the pupil chose the right operation but made an arithmetic slip, retain the same kind of question and slow down the written method. If the operation was unsuitable, ask what changed in the story and what quantity is now being requested. The next short example tests addition of two quantities; the complete wording makes the context part of the practice.

Worked example. A shop has 45 footballs. It receives a delivery of 28 more. How many footballs does the shop have now?

  1. The delivery adds to the 45 footballs, so calculate 45 + 28.
  2. 45 + 20 = 65, then 65 + 8 = 73.
  3. B1: 73 footballs.

Answer: 73

Fractions and equivalent forms

If a fraction answer is not in simplest form, check whether the numerator and denominator share a factor. Keep this correction separate from adding or multiplying fractions, which introduce other steps. Once simplifying is secure, choose a pack that matches the operation the pupil missed. Ask them to show the factor used so the mark scheme can be checked against visible reasoning rather than a bare final number.

Worked example. Simplify 10/15 fully.

  1. The highest common factor of 10 and 15 is 5.
  2. Divide the numerator and denominator by 5: 10/15 = 2/3.
  3. B1: 2/3 in its simplest form.

Answer: 2/3

Angles and shape language

When a pupil labels an angle incorrectly, practise naming the size category before selecting a calculation sheet. This checks whether the difficulty is vocabulary or finding an unknown angle. The supplied answer includes its reason, so compare the definition as well as the label. If the category is right but the size is not, return to the angle facts in the guide and then try another question from the angle pack.

Worked example. State whether an angle of 155 degrees is acute, obtuse, reflex or a right angle.

  1. A right angle is 90 degrees; an obtuse angle is greater than 90 and less than 180 degrees.
  2. 155 degrees lies between 90 and 180 degrees.
  3. B1: obtuse, because it is greater than 90 degrees but less than 180 degrees.

Answer: Obtuse (it is more than 90 degrees but less than 180 degrees)

Sequences and patterns

For a sequence question, inspect the change between consecutive terms before choosing a rule. A pupil who spots a constant difference can practise extending the sequence; a pupil who can extend it but cannot describe the rule may need to state the change in words. Check that both requested terms are present in the answer. When the basic pattern is secure, return to the pack for questions that ask for a position or a missing term.

Worked example. A sequence begins 4, 9, 14, 19, ... Write down the next two terms.

  1. Each term increases by 5: 9 - 4 = 5, 14 - 9 = 5, and 19 - 14 = 5.
  2. Add 5 to 19 to get 24, then add 5 again to get 29.
  3. B1: 24 and 29, the next two terms.

Answer: 24, 29 (add 5 to the previous term each time)

Rounding: identify the decision digit

After marking a rounding attempt, inspect the place requested before checking the arithmetic. A pupil may have applied a sensible rounding rule to the wrong column. On the next Place Value and Ordering sheet, have the pupil identify the hundreds, tens or other requested place before looking immediately to its right. That neighbouring digit decides whether the retained digit stays or increases. Digits farther right do not each trigger another rounding step. The sample below asks for hundreds, so the tens column makes the decision. A correct answer should still represent a multiple of a hundred, rather than leave smaller place values attached.

If the marked response is too small, check whether the pupil simply removed the last digits. If it is too large, check whether they looked at the rounding digit itself instead of its neighbour. Those are different corrections, even though both appeared in the same topic. Record the cause beside the checked question, then choose the next practice from that pack with the cause in mind. Keep the original attempt legible and write the correction separately so the change can be explained. After independent practice, compare the rounded value with the original number and consider whether their distance is sensible for the requested accuracy. Ordering practice is the better next step if the pupil cannot yet judge which of two possible rounded values is nearer.

Worked example. Round 4,652 to the nearest hundred.

  1. The hundreds digit in 4,652 is 6, and the digit to its right is 5.
  2. Because the tens digit is 5, increase the hundreds digit and replace the tens and ones with zeros.
  3. B1: 4,700.

Answer: 4,700

Keep intermediate results in a worded calculation

A checked multi-step attempt can reveal a correct first operation followed by the wrong use of its result. In Four Operations (Worded), label each intermediate amount with what it means. This makes the point where the method changes easier to find. In the charity sample, equal sharing comes before the contribution to a raffle prize. Subtracting from the overall collection first would describe a different situation because the contribution is made by each team. Read the sentence containing the word each alongside the working. The question is asking about one team at the end, so the final unit is pounds for one team, rather than pounds across all teams.

Choose this pack when the marked attempt shows uncertainty about the order of operations in a story. If the setup already matches the intended method and only the division is inaccurate, focus the review on that division. Rewriting the whole story as a new method can hide a smaller arithmetic issue. Before starting the next printed exercise, the pupil can draw a short chain of labelled quantities from the amount raised to the amount shared to the amount remaining. During marking, check the chain against the words before comparing final numbers. A correct result obtained by an unexplained operation is worth discussing, since the aim is to repeat the reasoning independently. Return to a single-operation question from the existing pack if the pupil cannot explain why the first division represents equal shares.

Worked example. A charity raises 748 pounds, shared equally between 4 teams. Each team then gives 15 pounds to a raffle prize. How much does each team have left?

  1. Share 748 pounds equally: 748 / 4 = 187 pounds per team. M1: divide the collection into four equal shares.
  2. Each team then contributes 15 pounds: 187 - 15 = 172. A1: 172 pounds left for each team.

Answer: 172 pounds (748 / 4 = 187, 187 - 15 = 172)

Unlike denominators need equal-sized parts

When a marked fraction subtraction is wrong, inspect the denominator line. Subtracting denominators treats the size of a part as though it were another amount being removed. In Fractions, the correction is to express both quantities using parts of the same size, then subtract the numerators while retaining that shared denominator. The sample uses sixths, so only the second fraction needs rewriting. This is different from simplifying, where the amount remains unchanged throughout. Choose the subtraction practice when equivalent fractions are understood but the pupil has not yet used them to combine or remove amounts.

Write the equivalent fraction directly below the original before proceeding. That makes it possible to check whether the conversion was valid separately from the subtraction. If the conversion itself is wrong, revisit the factor applied to the numerator and denominator together. If the subtraction is right but the answer is unfinished, practise spotting a remaining common factor. During the next attempt, the pupil should show these stages without looking at the worked answer. When marking, accept an equivalent fraction as evidence of the amount found, then check whether the instruction also asked for simplest form. A final answer can therefore need a further presentation step even when the subtraction was sound. Use that precise diagnosis when choosing another sheet, rather than treating every lost fraction mark as a need to restart the full topic.

Worked example. Work out 5/6 - 1/3, giving your answer in its simplest form.

  1. Rewrite 1/3 as 2/6 so the parts have the same size.
  2. Subtract: 5/6 - 2/6 = 3/6. Divide top and bottom by 3.
  3. B1: 1/2 in simplest form.

Answer: 1/2 (5/6 - 2/6 = 3/6 = 1/2)

Decimal addition: align the point before calculating

A decimal addition error often begins before the addition itself. Check whether equal place values were written in the same column. In Decimals, a shorter number can be written with a trailing zero so that tenths and hundredths are both visible. This does not change its value. It does prevent a pupil from lining up the last written digits and accidentally adding tenths to hundredths. Choose this practice when the marked calculation has a clear column error. If the columns are already aligned, check carrying within the addition rather than replacing the setup.

The sample can be reviewed by separating whole units from the decimal parts. That supplies an estimate of the final size as well as a column method. On the printable sheet, leave room for each number to occupy its own row and place the decimal point in the result under the other decimal points. When marking, look at the first mismatching column and follow any carry into the next one. A wrong final digit may be the consequence of an earlier carry, so the last line alone does not identify the correction. Once addition is reliable, move to subtraction or another operation named by the checked attempt. Avoid moving straight to longer decimal multiplication merely because it shares the topic heading. The purpose of this sheet is to make a specific place-value calculation dependable.

Worked example. Work out 4.7 + 3.85.

  1. Write 4.7 as 4.70 and align its decimal point with 3.85.
  2. Add hundredths: 0 + 5 = 5. Add tenths: 7 + 8 = 15 tenths, so write 5 tenths and carry 1 whole.
  3. Whole units: 4 + 3 + 1 = 8. B1: 8.55.

Answer: 8.55

Percentage change: distinguish the change from the result

If a marked percentage answer gives only the increase, the pupil may have completed the percentage calculation correctly and stopped early. Percentages practice should then concentrate on naming the intermediate quantity and carrying out the final addition or subtraction. In the price sample, a quarter of the original amount gives the increase. The new price includes that increase as well as the original price. Choose this pack when the pupil can identify the original whole but needs practice interpreting what the final sentence requests. If they have found a percentage of the wrong quantity, address that earlier decision first.

Before the next printed attempt, the pupil can label the original amount, the change and the new amount on separate working lines. This is especially useful when increase and decrease questions are mixed. During marking, check the direction of the change against the wording: a positive increase must produce a price above the original, and a reduction must produce a price below it. That size check cannot prove every digit correct, but it can reveal a final subtraction where addition was needed. Keep the percentage calculation visible when correcting the final line, so the pupil can see which part was already successful. Once both stages are accurate, use connected money or proportion practice to check whether the same distinction survives a less familiar setting.

Worked example. A price of 40 pounds is increased by 25%. Work out the new price.

  1. Find 25% of 40 pounds: 40 / 4 = 10 pounds. M1: calculate the increase.
  2. Add the increase to the original: 40 + 10 = 50. A1: new price 50 pounds.

Answer: 50 pounds (25% of 40 = 10, 40 + 10 = 50)

Proportion: find the cost of one item

In a checked proportion attempt, compare what each number represents before comparing the numerical answer. A pupil may have multiplied the total price by the number wanted, even though the total already covers several items. Ratio and Proportion practice can make the missing unit step visible. Divide the stated cost by the stated number of identical items to find one item, then scale that unit cost to the required count. In the pen sample, the same price per pen applies throughout. The calculation is a direct scaling relationship, so the quantities must stay in corresponding pairs.

On the next sheet, encourage a small working table with item count on one side and cost on the other. Record the original pair, the one-item pair and the requested pair. This gives the mark scheme something clear to be compared against and makes a reversed division easier to spot. Keep pounds and pence consistent in the table; converting only one price can create an apparent ratio error that is actually a unit error. After marking, decide whether the correction belongs to division, scaling or money notation. A pupil who can explain all three stages can try another listed proportion exercise independently. If the meaning of a unit price is still unclear, return to the guide before increasing the length of the worksheet. Longer arithmetic alone will not settle which quantity should be divided by which.

Worked example. 8 identical pens cost 6.40 pounds. Calculate the cost of 5 of these pens.

  1. Find one pen: 6.40 / 8 = 0.80 pounds. M1: calculate a unit cost.
  2. Five pens cost 5 x 0.80 = 4.00 pounds. A1: 4.00 pounds.

Answer: 4.00 pounds (6.40 / 8 = 0.80, 0.80 x 5 = 4.00)

A missing value in a mean problem

After checking an averages attempt, distinguish a wrong total from a wrong count. The denominator in a mean calculation is the number of observations, including any value that has not yet been found. In Averages, a missing-value problem can be solved by recovering the total that the complete set must have. The known values then account for part of that total, and subtraction gives the missing value. Choose this practice when the pupil can calculate a mean but has treated the mean as though it were the missing observation itself. Reading the word six in the sample is part of setting up the relationship.

Keep the required total and the known total on separate labelled lines. If both totals are correct but the final subtraction is wrong, preserve that successful setup and correct the arithmetic. If the pupil divides the known total by the target mean, revisit what equal sharing means before another attempt. When reviewing the printed work, put the recovered value back into the list and calculate the mean of the complete set. This provides a check using the original condition instead of simply repeating the same subtraction. A pupil who can perform that check independently has stronger evidence of understanding than one who only matches the supplied key. Move to another average only when the marked work shows that selecting mean, median or mode is also secure, since the missing-value method depends specifically on the mean.

Worked example. Six numbers have a mean of 8. Five of the numbers are 5, 7, 9, 10 and 6. Work out the sixth number.

  1. Six values with mean 8 need total 6 x 8 = 48. M1: recover the required total.
  2. The known total is 5 + 7 + 9 + 10 + 6 = 37. The missing value is 48 - 37 = 11. A1: 11.
  3. Check: (37 + 11) / 6 = 48 / 6 = 8.

Answer: 11 (total needed = 48, sum of the five known numbers = 37, so 48 - 37 = 11)

Change: subtract amounts in matching units

A checked money subtraction should show both the amount paid and the cost in the same unit. Money Problems is a focused choice when a pupil has confused the price with the change or mixed pounds and pence in one calculation. Write a whole-pound payment with two decimal places when subtracting a decimal price. Alternatively, work wholly in pence and convert the result afterwards. Both approaches describe the same amounts, but switching units halfway through can change the scale of the answer. The sample asks for the money returned, so the cost must be taken from the payment.

When the marked answer is incorrect, first check the direction of subtraction, then the column alignment and any exchanges across zeros. There is no need to alter a correct choice of operation merely because one exchange was missed. On the next worksheet, the pupil should keep each exchange visible and label the result in pounds or pence. Mark the result by adding the stated cost back to the proposed change. The total should recover the amount paid. This inverse check is useful because it tests the relationship in the story as well as the written subtraction. If the addition recovers a different payment, follow the columns to find the first discrepancy. Once change calculations are reliable, repeated-cost or discount work can be chosen from the catalogue when those are the errors identified in the next checked attempt.

Worked example. Maya has a 10 pound note. She buys a drink costing 2.35 pounds. How much change does she get?

  1. Express both amounts in pence: 10 pounds = 1000p and 2.35 pounds = 235p.
  2. Subtract: 1000 - 235 = 765p. Convert back: 765p = 7.65 pounds.
  3. Check: 2.35 + 7.65 = 10.00. B1: 7.65 pounds change.

Answer: 7.65 pounds (10.00 - 2.35)

Elapsed time: work through the hour boundary

If a checked duration looks like a subtraction of decimal numbers, choose Time and Timetables and return to the hour boundary. Clock minutes do not run to a hundred. Count forward to the next hour, include complete hours in the middle, and then add the final minutes. In the train sample, there is a short part before eight, a complete hour and a short part after nine. The answer is the duration between departure and arrival, so it should be written as hours and minutes rather than as an arrival time.

On the printed attempt, a short timeline can hold each part of the journey. Label the departure, each hour boundary and the arrival before calculating the intervals. Check that every interval joins the next without a gap or overlap. If a pupil counts the endpoints as extra minutes, show that the labels mark positions in time rather than separate events to count. During marking, add the duration back to the departure and see whether it reaches the arrival. This also helps distinguish an arithmetic error from a misread timetable entry. If the wrong row was selected, retain any correct elapsed-time method and focus the next review on reading the table. If the row was correct but the duration was not, practise counting across hours before adding a more involved timetable. The next resource should match that diagnosis.

Worked example. A train leaves at 07:42 and arrives at 09:05. How long does the journey take?

  1. From 07:42 to 08:00 is 18 minutes; from 08:00 to 09:00 is 1 hour. M1: split the interval at hour boundaries.
  2. From 09:00 to 09:05 is 5 minutes. Add the parts: 18 + 5 = 23 minutes, plus the full hour. A1: 1 hour 23 minutes.

Answer: 1 hour 23 minutes

Subtracting a component from a measured total

A checked measures problem may have the correct subtraction but incompatible units. In Measures and Units, convert the total and its component to the same unit before finding a remaining amount. The parcel sample gives the total mass in kilograms and the packaging in grams, then requests the contents in grams. This points to converting the total first. The converted quantity must still describe the same parcel, so its numerical value increases when expressed in the smaller unit. Subtracting the unconverted kilogram number from the gram number would mix different-sized units.

On the next sheet, write the conversion as a full equality with units at both ends. Keep it above the subtraction so it can be checked separately. If the conversion is correct but the contents are reported with the wrong unit, concentrate on the final recording step. If the operation is wrong, identify which quantity is the whole and which part is being removed. During marking, add the contents and packaging in grams to see whether they recover the converted total. That check makes the role of each amount explicit. A pupil who still confuses the conversion direction should revisit the unit relationship in the guide before combining it with another operation. Once the direction is secure, choose further measures practice that follows the same sequence of converting, calculating and reporting. The aim is a repeatable method for the error found in the original attempt.

Worked example. A parcel has a total mass of 3.1 kg. The packaging has a mass of 275 g. Calculate the mass of the contents, in grams.

  1. Convert 3.1 kg to grams: 3.1 x 1000 = 3100 g. M1: put both masses in grams.
  2. Subtract packaging: 3100 - 275 = 2825 g. A1: contents mass 2825 g.
  3. Check: 2825 + 275 = 3100 g.

Answer: 2825 g (3100 - 275)

Volume: include the third dimension

If a checked volume answer is only the square of an edge, the pupil may have found the area of a face and stopped. Perimeter, Area and Volume practice should then make the third dimension visible. A cube has equal length, width and height, but all three measurements still contribute to the space inside it. The sample uses that relationship directly. It needs cubic units because the calculation counts space in three dimensions. Choose the volume work when this is the identified gap, rather than repeating boundary-length calculations that the pupil already handles accurately.

Start the next printed attempt with labels for length, width and height, even when they all have the same value. Write their product before evaluating it. This shows whether the setup includes every dimension and separates formula choice from multiplication. During marking, look at the unit as evidence of what quantity the pupil thought they were finding: a square unit suggests area, while an ordinary length unit suggests a missing distinction. Do not fix only the unit if the calculation also uses too few dimensions. If the setup is correct, check the multiplication one stage at a time. Keep the intermediate face area labelled so it is not mistaken for the final volume. Once this method is independent, a cuboid in the existing pack can check that the pupil uses the same relationship when the three dimensions are different, without relying on the repeated edge length of a cube.

Worked example. A cube has edges of length 5 cm. Calculate its volume.

  1. A cube has equal length, width and height, each 5 cm.
  2. Multiply all three: 5 x 5 x 5 = 25 x 5 = 125.
  3. B1: volume 125 cm^3.

Answer: 125 cm^3 (5 x 5 x 5)

Substitution: replace each letter before simplifying

A checked substitution error can come from treating a letter as a label rather than a number, or from losing an operation while replacing it. Early Algebra is the focused choice when the pupil needs to write the substituted expression before calculating. In the sample, 3x means three multiplied by x, and the subtraction of y remains after that product. Replace both letters with their supplied values while keeping the original structure. A written substitution line makes the error visible if the pupil has added three to x or multiplied the whole expression by it.

On the next sheet, compare the substituted line with the printed expression before working out its value. Every letter should be replaced, every coefficient should remain, and the operation signs should still be in their original positions. Carry out multiplication before subtraction in this example. If the substitution line is right and the final value is wrong, focus on that order or on the arithmetic, rather than reteaching what the letters mean. If a supplied value has been copied incorrectly, make accurate transcription the first check. During marking, read each term aloud with its substituted value so that missing factors are easier to hear. A pupil who can explain the two stages can practise independently; a pupil who combines them mentally and repeatedly loses a sign should keep the substitution line until the process is reliable. This is a specific reason to choose another algebra worksheet after reviewing the attempt.

Worked example. x = 5 and y = 2. Work out the value of 3x - y.

  1. Replace x by 5 and y by 2: 3x - y = 3 x 5 - 2. M1: substitute both values.
  2. Multiply first: 15 - 2 = 13. A1: 13.

Answer: 13 (3 x 5 - 2)

Overlapping groups: count the shared part once

When a checked logic problem counts some pupils twice, Logic and Puzzle Problems can provide focused practice in organising the information. In the sports sample, the netball and hockey totals overlap. Adding them counts the pupils who play both sports twice, so one copy of that shared group must be removed before finding those who play neither. A small table separating netball only, hockey only, both and neither can keep the groups distinct. Choose this work when the arithmetic is straightforward but the pupil has not represented the relationships correctly.

In the next printed attempt, record the shared group before calculating the exclusive groups. Check that a pupil who belongs to both is still counted once in the total playing at least one sport. Then compare that total with the whole class to find the group outside both sports. During marking, rebuild each original sport total from its exclusive group and the shared group. Finally, add every separate group to confirm the class total. These checks test different conditions, so they can reveal an arrangement that happens to give the right final subtraction for the wrong reason. If the pupil has represented the groups correctly and only made an addition slip, keep the representation and correct the sum. If the categories themselves overlap, revisit the meaning of only, both and neither before another attempt. More random puzzle practice will be less useful than resolving that exact counting decision.

Worked example. In a class of 28 pupils, 16 play netball, 12 play hockey, and 5 play both sports. How many pupils play neither sport?

  1. There are 16 - 5 = 11 netball-only pupils and 12 - 5 = 7 hockey-only pupils. M1: account for the overlap once.
  2. At least one sport: 11 + 7 + 5 = 23 pupils. Neither: 28 - 23 = 5. A1: 5 pupils.
  3. Check all separate groups: 11 + 7 + 5 + 5 = 28.

Answer: 5 pupils (11 play netball only, 7 play hockey only, plus 5 play both gives 23 playing at least one sport, so 28 - 23 = 5)

Keep going

Build these into a personalised pack.